Jump to content
EwinRacing Flash Series Gaming Chairs
Khelekwen

M17X R4 w/ 980m issue after reverting to 7. Please Help

Recommended Posts

Not sure where to post this so I just added it to general.

 

I just upgraded my M17X R4 120Hz from 675m to a 980m and I'm having a problem I hope someone here can help me with.

 

To start: It was installed correctly and successfully on Windows 10 (I wanted to start somewhere more certain). Everything worked fine and everything read fine (as far as the graphics card goes). After I was sure everything was working properly, I reverted to Windows 7. As I read, with the current unlocked BIOS A11 (posted on this site) it's capable of running 9xxM series in windows 7.  When I installed 7 on this laptop soon after buying it (reformatted old HDD, moved to bay 1, inserted 500GB SSD in bay 0 and installed 7 OS on it) I installed selecting the UEFI option and the drive is in GPT. As mentioned, I have Unlocked A11 BIOS (thank you to the maker on this site!). 

 

Anyway, once I reverted to 7 it started to boot up and said it needed to run startup repair. I allowed it and it froze once the bar filled at the bottom. Upon restarting I tried once more.. same thing. I tried to "start normally" and it starts boot looping.

I then changed "Load Legacy Option Rom" from disable to enable. This causes the 8 beep post issue immediately upon power on. This problem doesn't exist when this option is disabled. I then utilized the HDMI trick (I made a separate post for this the other day. Connect HDMI out to any screen and it will cause post on the laptop screen [but not on the external device]. Can then immediately disconnect once post has occured and works fine with no error or beeps). This let it boot up and I'm able to get to the desktop and everything works fine. Can even run screen at 120Hz. I ran diagnostics on the card, checked drivers.. everything is reading correctly. This is workable, but far from an ideal solution as I need to have a cable and some kind of HDMI screen available just to boot up every time.

 

I have two option here and I'm hoping someone can provide a little guidance one way or the other. I can either fix the boot looping issue on "Legacy Rom - disabled" (it hangs on classpnp.sys when I try safe mode if that information helps at all). OR, I need to find a way for it to post when "Legacy Rom - enable" without connecting to an HDMI device (just plugging in the cable doesn't work. It has to be connected to something on the other end).

For the first, I have tried start up repair and tried repairing using my WIN 7 disc but it doesn't actually pull up the menu. It just shows the windows loading screen and then freezes after a while.

For the second I have tried changing different video options in hopes it will post on boot without connecting to an external or tried to find a way to keep the HDMI port active without something being in it. I can make no progress with either of these as I'm unaware exactly what exaclty the selections change. I currently have it set to PEG.

 

Also, I have tried bios reset through removing all power sources and the 2032 CMOS and holding power button 30 seconds. Didn't help.

 

Any help or guidance would be greatly appreciated. Feel free to ask any questions you have that could assist in ascertaining the source of the problem in either instance.

 

As a last resort, I could go back to 10, but I would really rather not. The R4 (in Dell's words) isn't being tested for compatibility. Many features don't seem to work, and overall I just much prefer 7.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By -GP
      I got a msi ge60 2pf Apache pro & its specs :
       
      Processor-i7 4710MQ
      Ram-16GB 
      VGA- GTX 860M 2GB Maxwell 
       
      Could anyone tell me the best overclock that I could use on this GPU?
      Please keep in mind that the voltage cannot be changed as this is a laptop
       
      Thank you
    • By OnaStack100
      I have a p150sm which has a seemingly dead 780m due to a perpetual error 43 which came after a big BSOD about 6 months ago. I upgraded the laptop to a 980m and modded the inf files. The upgrade was perfectly fine for a week. One day, i left the laptop and something related to sleep or power may have caused the laptop to shut off. Since then, the laptop with the 980m won't boot. I tried many things like resetting cmos, taking out the hardware and putting it back in, and resetting bios, and buying a 230W adapter. Nothing worked. The laptop works fine with the old dead 780m in there, but now when the 980m is in there, holding the power button generates a green light flash and then the power LED goes back to orange. No sounds, maybe one tick, and that's it. What is left to try?
    • By laxus
      i want to ask two favours and a question from this community ..
       
      1.) Can someone mod my 940 mx to increase the target temperature and allow higher overclocking than 135hzband voltage control
       
      2.) Allowing my i5 7200U to be undervolted to reduce overall heat 
       
      The question : I repasted my gpu and cpu cleaned it thoroughly, made sure twice everything is connected properly, use a cooling pad and yet the upper portion of my chasis above f1-f12 keys is so hot that i can roast peanuts on it. 
       
      (if i left out any info or missed something please reply i would really love to have a page that has everything for people who have this laptop specifically for light gaming.)
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.