I have a p150sm which has a seemingly dead 780m due to a perpetual error 43 which came after a big BSOD about 6 months ago. I upgraded the laptop to a 980m and modded the inf files. The upgrade was perfectly fine for a week. One day, i left the laptop and something related to sleep or power may have caused the laptop to shut off. Since then, the laptop with the 980m won't boot. I tried many things like resetting cmos, taking out the hardware and putting it back in, and resetting bios, and buying a 230W adapter. Nothing worked. The laptop works fine with the old dead 780m in there, but now when the 980m is in there, holding the power button generates a green light flash and then the power LED goes back to orange. No sounds, maybe one tick, and that's it. What is left to try?
After the most recent Windows 10 update, my Clevo Control Centre has stopped working properly. When I try to change the fan speed nothing happens and this is causing my laptop to overheat when playing certain games. This has happened before but using malware bytes seemed to work; that was a free trial so I no longer have access to this.
Please can someone help? I'm at my wits end with this.
i want to ask two favours and a question from this community ..
1.) Can someone mod my 940 mx to increase the target temperature and allow higher overclocking than 135hzband voltage control
2.) Allowing my i5 7200U to be undervolted to reduce overall heat
The question : I repasted my gpu and cpu cleaned it thoroughly, made sure twice everything is connected properly, use a cooling pad and yet the upper portion of my chasis above f1-f12 keys is so hot that i can roast peanuts on it.
(if i left out any info or missed something please reply i would really love to have a page that has everything for people who have this laptop specifically for light gaming.)
So I just received a 980m in the post and after installing it I was greeted by multiple system crashes on my Alienware m17xr4 and was unable to install new drivers.
Is there a step in the intallation process I missed? A bios setting I was supposed to change? The laptop is already set to UEFI mode in preperation for this and upon putting the old 680m back in the system it now works again. I have heard that I need to change INI files to install drivers but I expected it to at least function without large bugs such as these. Do you think that this GPU is faulty or have I done something wrong?
Thanks for any help you can give.