Jump to content
EwinRacing Flash Series Gaming Chairs

Recommended Posts

Dear Members,

I just want to create this Topic to list all laptop systems supporting (2X) Desktop GTX 980 SLI, and all information related to them, technical, pricing and reviews. In the same time, it will help me and other respected members to decide which one should we buy.

 

1- MSI GT80S Titan Skylake, SLI GTX980 Desktop GPU

https://www.msi.com/Notebook/GT80S-6QF-TITAN-SLI-29TH-ANNIVERSARY-EDITION.html#hero-overview

 

--------------------------------------------------------------

2- New Asus ROG GX800 watercooled Gaming-Laptop

Regards,

Edited by Dr. AMK
add tags

Share this post


Link to post
Share on other sites

Other laptops without mods can't run it ? Like P570WM or P870DM ? At least P870DM should be ok to run GTX 980 Mobile in SLI

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

We are waiting for all brands to innocence supporting desktop SLI's, no one except MSI until now.  There are many concerns about it, like power consumption and performance limitations.

Share this post


Link to post
Share on other sites

I dont get why they are still trying to make them slim. When going for maximum performance, thats the last thing on anyones mind. I would get one even if it were twice as thick.

  • Thumbs Up 2

Share this post


Link to post
Share on other sites
5 hours ago, Dr. AMK said:

Asus ROG GX800 watercooled Gaming-Laptop

 

As far as I know all above mentioned notebooks are somewhat crippled, because of insufficient power supply.

 

- MSI GT80S: is suffering from only accepting ONE 330W power brick which results in battery draining as additional power source to sustain the components power draw under heavy load. Not so good imo, cause you aren't able to unleash the full potential of the 980's.

 

- Asus ROG GX800: "Same" here! As long it is docked, it should be fine, but as soon as you want it portable the same as MSI's Titan: Only one power brick with restrictions in power Management, which makes it rather useless as beeing a "notebook".

 

Would love to see some SLI Pascal power in the P570WM! Well, let's see, if MXM 3.0b will become obsolete or not....

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Guardian241
      So I just received a 980m in the post and after installing it I was greeted by multiple system crashes on my Alienware m17xr4 and was unable to install new drivers.

      Is there a step in the intallation process I missed? A bios setting I was supposed to change? The laptop is already set to UEFI mode in preperation for this and upon putting the old 680m back in the system it now works again. I have heard that I need to change INI files to install drivers but I expected it to at least function without large bugs such as these. Do you think that this GPU is faulty or have I done something wrong?
       
      Thanks for any help you can give.
       
      - M
    • By Guardian241
      Hi,
       
      I've recently got my hands on an M17x R4 Alienware Laptop from 2013 which I love. I've replaced the screen, keyboard, RAM, and hard drive to make it into a fully modern laptop. However, I'm currently waiting on a replacement for the 680m GPU with a 980m from ebay. My question for you all is, do I need to do anything with the BIOS to make this 980m work? Is there a way to prevent the laptop from using Intel HD Graphics with Optimus? I think the Intel HD Graphics on this laptop are currently broken as I see static-looking dots flash on the screen. (See image below for example). My theory is that because Intel HD Graphics with Optimus is still in-use while in-game, the dots are being caused by it.
       
      Thanks for any help in advance.
       
      - M
       

       
       
    • By ReverseEffect
      3dMark11 Performance Preset Benchmark: http://www.3dmark.com/3dm11/11262792
       
      Required items:
      1.) Lenovo u310 (I have a Core i3 - Ivy Bridge, 8GB RAM)
      2.) 65CN99WW unwhitelisted.
      3.) eGPU (I used a EVGA GTX 750 Ti from another computer I had).
      4.) EXP GDC mPCIe Edition adapter (got from eBay - banggood seller).
      5.) ATX power supply (I used a 600W PSU from another computer I had).
      6.) USB wireless.
      7.) External monitor, keyboard, and mouse.
       
      Steps:
      1.) Obtain and install a unwhitelisted BIOS. If you are unable to obtain a unwhitelist BIOS, I think it might be possible to bypass it with Tech Inferno Fan's Setup 1.x (may need confirmation as I haven't used it myself yet.)
      2.) Shutdown computer and remove all USB devices, ethernet cables, power cables, card reader cards.
      3.) Remove mPCIe wireless card and detach antennas.
       
       
      4.) Attach EXP GDC external mPCIe cable to the former wireless slot and screw down.
       
       
      5.) Attach HDMI end of the mPCIe cable adapter to the EXP GDC device.
       
       
      6.) Attach graphics card to the EXP GDC device (I moved my laptop off the desk and onto the side shelf to make room on the desk for the monitor/keyboard/mouse).
       
       
      7.) Using the power cable adapters that came with the EXP GDC device, I hooked in my ATX power supply's 20 pin and CPU 4 pin cables. Then hooked the other end (8 pin) into the EXP GDC device. My EVGA 750 Ti also required that I use an additional PCIe power cable (6 pin) in the top of the card.
       
       
       
       
       
      8.) Then I attached my misc devices (HDMI monitor, USB keyboard/mouse/wireless adapter), and hooked in my PSU and powered it on (below is image of final product, also moved HDMI cable out of the way).
       

       
      9.) Power on your computer and let it install the standard VGA drivers and then install your drivers (I didn't have to go in the BIOS for any graphics settings, which it doesn't have anyways, nor did I have to disable iGPU in Device Manager before the card was added).
       
      Extra Info:
      I found that most games will play on med settings with about 45 FPS with this particular card.
      BDO: Upscale on - Anti Aliasing on - SSAO off - med settings.
      Skyrim: Med-High settings.
      Fallout 4: Med settings.
       
      (EDIT 5/19/2016) > Images added.
       
    • By narbardarse
      ok, so, i have a serious problem atm.
      im trying to mod my bios so that i can go past the normal overclocking limit. however, everytime i try to do it, it always says "file size does not match existing bios size!", and it's really annoying, since i had to find everything myself, as no one else online tried this on my specific model, besides me. (which surprises me, really)
      this is the guide im following:
      So this is my detailed description how I managed to mod and overclock my GTX 960M in my Lenovo Y50-70. Please note: it is very dangerous to play with the BIOS, so you need to be very careful! I take NO RESPONSIBILITY for any damage or misuse of the information below! Use it AT YOUR OWN RISK!
       
      -------
       

      Necessary tools:
      A. Fptw64 from Intel (9.5 or above)
      http://forum.hwbot.org/showthread.php?t=75024
      B. PhoenixTool (2.50 or above)
      C. Maxwell II BIOS Tweaker (1.36)
      https://www.techpowerup.com/downloads/2562/maxwell-ii-bios-tweaker-v1-36/
       
      -------------------------
       
      How to flash Modded BIOS:
      0. Flash the latest (3.03 now) official BIOS
      1. From Windows, start 'cmd' as Administrator and read your your BIOS via Fptw64:
         Fptw64 -d BIOS.ROM -bios
      2. Reboot, enter your BIOS and check "Enable downgrading BIOS" feature (we need to downgrade first in order to flash the modded BIOS)
      3. From Windows, downgrade to 1.13 (this is necessary because the newer BIOSes have protection against mod-ding)
      4. After reboot & reflash, start Windows, then enter standby, wait a bit, then wake up the machine
      5. Create your modded BIOS, see separate list below
      6. Start 'cmd' as Administrator and write your _modded_ BIOS via Fptw64:
         Fptw64 -f BIOS_MODDED.ROM -bios
       
      -------------------------
       
      How to create modded BIOS (point 5 above):
      5.1 Start PhoenixTool.exe from Phoenix Tool 2.50 and open your previously saved original BIOS.ROM from point #1 above
       .2 The tool analyses it and shows some messages, click OK
       .3 Now you can find your vBIOS in the "DUMP" subfolder in the folder containing your BIOS.ROM, with the file name:
          BE13645B-2C2C-44D2-A64F-0EA052C34597_1796.ROM
       .4 Create your modded vBIOS, see separate list below -> let's call it 960M_OC.MOD
       .5 Click on "Structure"
       .6 Open "EFI BIOS" tag
       .7 Open second "File Volume {7A9354D9-...}" tag
       .8 DXE Core -> Compressed Section -> Raw section -> File Volume {7A9354D9-...}
       .9 In the very long list, find the following tag (usually displayed at around 80% of the list):
          Freeform {BE13645B-2C2C-44D2-A64F-0EA052C34597}
          This is the item containing the latest vBIOS
       .10 Open the tag, then "GUID defined section", then click on Raw section. "Internal number" (in the top right corner) should be 1796 for BIOS 3.03.
       .11 Click on "Replace" and select your modded vBIOS (called 960M_OC.MOD above)
       .12 Click exit "Exit" and say Yes to "Save changes?"
       .13 Close the Phoenix Tool; now you should have your BIOS.ROM updated (the original will be saved as BIOS.ROM.OLD for safety)
       
      -------------------------
       
      How to create modded vBIOS (point 5.4 above):
      Use Maxwell II BIOS Tweaker to change BE13645B-2C2C-44D2-A64F-0EA052C34597_1796.ROM;
      5.4.1 Open the ROM
         .2 Change "Boost Clock" on "Common" tab to the new boost-ed maximum value
         .3 On "Boost table" tab, use the slider in the right bottom corner to increase your max boost-ed value to the same number
         .4 On "Boost states" tab, at P00 profile, change the MAX values in the GPC, L2C and XBAR fields to the same max boost-ed value
         .5 Save your modified BIOS and rename it to 960M_OC.MOD
       
      (My boost-ed max value was 1359 MHz. I could then use MSI Afterburner's software tuning -> my 960M could reach 1454 MHz without voltage increase.)
      i know that it's for a different laptop, but its basically the same
      ill provide more info when im home
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.