This topic is now closed to further replies.
Voila depuis que j'ai fait un formatage du SSD pour l'avoir de nouveau propre je remet tout dans l'ordre mais maintenant j'ai un souci. Quand je me met a jouer (World of tank, Civilization 6 ou Monopoly plus) quand je vais sur la parti mon SSD monte à 100% d'utilisation (sans savoir pourquoi puisque l'utilisation de la bande n'est que de 0.1Mo/s (j'avais mis Gestionnaire des tâches en parallèle) tout ce met a freeze et ensuite le fameux écran bleu du crash Windows (erreur KERNEL_DATA_INPAGE_ERROR) éléments ayant échoué : win32kfull.sys donc bon je me suis mis a installer les jeux sur le disque dur et la rien à signaler, donc j'en conclu que mon SSD est problématique.
Ce que j'ai déjà essayer c'est reformater Windows avec le SSD dessus mais cela ne change rien, et j'ai vérifier tout mes pilotes de l'ordinateur
si quelqu'un peu m'aider à résoudre ce problème sa serais super !
Windows 10 Pro 64bits 21H1
i7 8700k (non oc)
asus strix Z370-E (bios 2401)
ram :16 go Corsair vengeance 3200mhz
alimentation 750watt 80+gold Seasonnic
disque dur 1to 5400tour/min WDC WD10JPVX-22JC3TO (récupérer de mon ancien pc portable)
et mon SSD Samsung 970 EVO 500Go
CG: 980TI ASUS STRIX
Eluktronics (Clevo P650RS) Problem when connecting the A / C when I want to put stress on the graphics cardBy ElChuterRD
Greetings, I have a p650rs and I have this little problem that I can not play in MRHYBRID mode, only if the charger is connected, and I do not see high quality videos or play if it is in discret mode, if the A / C is connected.
Any idea what it could be?
I have the latest version of Bios and ECF
I've been looking for custom-made Vbios but I can not find anything.
Hello Fellow Tech Gurus!
I am having a huge headache after upgrading the ram memory of my m17x r3.
First let me start by saying I have been experiencing issues with my current ram setup recently, and so i decided to replace the ram inside of my computer, thinking they had gone out on me. It originally came with x4 2gb memory sticks, and as I started to experience issue, I started to removed them, and I was down to 1 2gb stick. It seems to me ram slots 1 & 2 are not working properly as when I put ram memory into them I would get BSOD in 5-10 mins of computer usage after boot. So I am thinking the slots have gone out. I also tested each slot individually and still same effect.
So I went on the try out slots 3 & 4 under the keyboard, which seems to work just fine when I use only 1 ram chip in one or the other. But the problem occurs when I try and fill both ram slots in slots 3 & 4 under the keyboard with crucial 2x 8 gb of ram sticks, which total to 16gb total ram memory.
BSOD and freezing occurs like crazy. But if I use just one of the ram sticks in either slot, no problem.
I dunno if this is hardware or software. I am think that my motherboard is on its way out the door, but any suggestions you all have would be great. I have already clean installed win 7, and is currently running bios A10 (unlocked, I believe)
I would also like to note that my motherboards internal vga is not detected, and just noticed this a few days ago upon trying to figure out the ram situation.
other issues is my laptop battery is pretty much dead, and the only for my computer to cut on is if the AC adapter is connected
I would also like to know can 1x 16gb 1600 ram stick run in my computer? or is it not supported by my motherboard?
Alienware M17xR3 (2011 3D FHD ed)
A10 (should be unlocked)
Microsoft Windows 7 Home Premium (64-bit)
Intel® Core™ i7-2960XM CPU @ 2.70GHz
Intel® 6 Series/C200 Series Chipset Family
Nvidia GTX 680m
IDT High Definition Audio CODEC
High Definition Audio Device
Networking and I/O
DW1501 Wireless-N WLAN Half-Mini Card
Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
HMA TAP-Windows Adapter V9
Crucial 8 GB (x2 qty) DDR3 PC3-12800 • CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.35V • 1024Meg x 64 •
(these only work under bay 3 or 4, but not dual 8gb at the same time, otherwise BSOD)
WDC WDBNCE5000PNC SSD (installed into bay 0)
I recently bought the new Toshiba RC100 m.2 2242 NVMe SSD for my Lenovo Y510p which has an m.2 port in it.
After installation the SSD wasn't showing up in my BIOS and also not on my OS Win 10 disk management. So I did a bit of research and installed mod BIOS for my Y510p by following the steps in the link: ( https://www.techinferno.com/index.php?/forums/topic/3546-lenovo-y410p-y510p-unlocked-bios-wlan-whitelist-mod-vbios-mod/ )
There are a lot more options in the BIOS menu now.
Even after doing the mod it's not showing up. The SSD works on my friend's "new 2017 dell gaming laptop" which has m.2 ssd support in it. I don't know what exactly to configure my BIOS to make it work. I've just done some hit-and-trial configs which have eventually failed.
If someone can help solve it Pleasee!!
P.S. : I can share all the available options available in the BIOS if required.
i have a z510 59398016 indian variant.
I had replaced the oem 1tb sshd on sata 3 port that came in it with 250 gb ssd 1 year ago.
now the optical disk drive on sata1 has gone haywire and i do not want to replace it as cd and dvd are obeolete and useless to me.
can some one suggest a caddy for z510 to use my old sshd in place of optical disc drive ?
would i be able to dualboot BW 2 drives if i do the above?
I tried caddy from local vendor but it is not getting recognised.
plz suggest some caddies compatible with z510