Jump to content
EwinRacing Flash Series Gaming Chairs
Brian

AMD Catalyst 11.4 preview driver for Windows 7

Recommended Posts

They seem to be working great with a very small overclock I get 5,200 3dmark11 I know I can squeeze a lot more than that out, keep ya posted.

Share this post


Link to post
Share on other sites

Did you try to make a clean install? Those are the best drivers I have tried so far, broke 6k on 3dMark11, no problem with games or with my Dell U2410 monitor either...

  • Thumbs Up 1

Share this post


Link to post
Share on other sites
Caused me to many problems of overheating and also including not able to connect to my monitor really made me annoyed running 11.3 for now.

The 11.4 drivers me and Stam use are posted in this forum. I have used hdmi to my 42'' lcd simultaneously and had no problems. Overvolting and overclocking can raise heat output. If you are doing neither then you can also use the fan control section of Hwinfo to control your temps the way you like, I have used the fan control myself at 13000ms respin time for my M17x R2 since it seemed to be the longest it could go without spinning down.

Edited by mw86

Share this post


Link to post
Share on other sites

No i didn't get it from the forum here i got it from NBR desktop drivers i will try what you posted, i did a full clean install going into safe mode etc.. the usual, no overclocking just my cpu sometimes the gpu once in a blue moon been to busy at school. My 5870 been overheating gotta get them to fix it again... I just want it to be repasted but the last time i did that the num, caps lock was going back and forth flashing so yeah....I will try the fan control, when playing mass effect 2 it was going up to 90C no overclocking connected to my Samsung monitor. I can't wait to buy the 2410 when i get a job real soon after i pay off the CC lol. Its a good boost it truly is but 11.3 is good too i can't wait to see the full release of 11.4 and how it will be.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By onemenhalogen
      Hello
      I have a problem with the Clevo P150
      I have installed various drivers, old ones, Windows 7 SP1 , Widows 10 and the same problem. Graphics card error and no sleep and hibernation and trouble with Wi-Fi
      long time to connect around 4/5 min.
      After installing the drivers most often, the laptop stops responding when the Windows LOGO is displayed. It also happens that it will enter the desktop and then a black screen will appear with the cursor in the upper left corner.
      When trying to install new drivers, for example, Intel pops up a window: "Your computer does not meet the minimum hardware requirements"
      After analyzing the problem, I came to the conclusion that it was a power problem and it was not a fault of power supply or motherboard just Prema Bios.
      My version is: 1.02.17PM v2  Ver 4.6.5.3
      If the bios is bad and you have the same opinion, then please provide a link to the latest version and explain step by step how to upload it.
      Another issue is graphics drivers
      Which drivers are best for HD7970m
      amd-catalyst-9.1.0.0
      amd_catalyst-12.4.0
      amd_catalyst-15.7.1
      Or maybe with crimson you are acting eg
      amd crimson -17.7.2
      Maybe I need to change the bios in the graphics card
      to the drivers from Crimson to work with HD7970m
      Let's know whether someone succeeded and thanks to him running Battlefield 1
      If so please write down how to step by step.

      Underneath screenshots:
       




    • By Conker
      AMD Catalyst 13.3 BETA
      Changelog:


      Download: AMD.com
    • By svl7
      11.10 got WHQL, get the official (mobility) version here (direct link).
      _____________________________________________
      Update 3: 11.10 Preview Version 3 has been released
      Release notes:
      AMD Catalyst™ 11.10 Version 3 Preview Driver Features:

      Reduces random crashing and stability encountered when playing Rage on Windows® 7 32-bit edition
      Reduces object / animation flickering and texture corruption encountered when playing Rage
      Reduces stuttering seen on Dual CPU and Tri CPU core systems
      Improves performance in Battlefield 3 Open Beta release for both non-Anti-Aliasing and application enabled Anti-Aliasing cases on single GPU configurations using the AMD Radeon™ HD 6000 and AMD Radeon HD 5000 series of products.
      Improves performance in Battlefield 3 Open Beta release for both non-Anti-Aliasing and application enabled Anti-Aliasing cases on AMD CrossFire™ configurations using the AMD Radeon HD 6000 and AMD Radeon HD 5000 series of products.
      Improves performance in Rage on single GPU configurations using the AMD Radeon HD 6000, AMD Radeon HD 5000 Series and AMD Radeon HD 4000 series of products.
      Reduces intermittent crashing seen loading levels in Rage
      Reduces flickering of NPCs in Rage
      Enables automatic Vsync for Rage
      Enables support for AMD Eyefinity 5x1 display (portrait and landscape) configurations using the AMD Radeon HD 6000 and AMD Radeon HD 5000 series of products.
      AMD Vision Engine Control Center: User Interface enhancements have been implemented for the AMD CrossfireX™, GPU AMD Overdrive™ and Information Center pages.
      Direct download link (Win7):
      http://www2.ati.com/drivers/hotfix/catalyst_11.10_preview/amd_catalyst_11.10_preview3_win7_vista.exe
      I just installed it, so it seems to support at least the 6990m when it comes to the mobile cards. Haven't tested it yet with BF3, will see how it performs. It seems to work very well for some people, other are reporting issues with Rage and other games.
      __________________________________________________________
      The preview of Catalyst 11.10 is up on the AMD site, seems to be primarily made and optimized for BF3, check out the release notes:
      ******
      Download link: http://support.amd.com/us/Pages/AMDCatalyst1110Previewdriver.aspx

      Edit: Here's a mobility mod, provided by V-FrIeNd from guru3d: [AIO] AMD Catalyst 11.10 Preview (8.901.0) Win7.7z

      ******
      UPDATE:

      AMD Catalyst 11.10 Preview V2 (7th October 2011):
      New version has been released, this includes further optimization for BF3 open beta, and also should solve some issues with RAGE, haven't tried it yet, in case you install it let me know whether it works without a mobility mod and how the performance is.
      Link: AMD Catalyst

    • By Brian
      Ok guys, these are newer than 11.11a and they will NOT cause your Alienware based system to go into an endless BSOD loop like 11.11a do. During the install process, you MIGHT encounter a bsod while the display driver is installing but upon reboot it should install successfully. After that, re-run the installer again and finish it by installing the CCC + HDMI drivers. This release includes profiles AND the ability to create your own gaming profiles! In addition, brightness controls are finally working!! Tested these in Saints Row: The Third and the performance is top notch so give them a shot and let us know what you think.

      For our special T|I members, we've included a download link for you hosted on our own servers: http://forum.techinferno.com/downloads.php?do=file&id=15 (file will take 30 minutes to show on our CDN).
      Mirror link: Deposit Files





×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.