Jump to content

NVIDIA Maxwell VBIOS mods - 900m series overclocking versions


svl7

Recommended Posts

  • Bios Modder
8 hours ago, Ganzuas said:

Hi, Klem, I have vBIOS modded and undervolted but temperature is too high yet. Could you help me with a new one?

Hi!

No, I make vBIOS to increase the possibility of overclocking a graphic card, but not to lower temperature, and not to undervolting. So, I can't help in your case. Sorry.

Link to comment
Share on other sites

14 hours ago, Klem said:

Hi!

No, I make vBIOS to increase the possibility of overclocking a graphic card, but not to lower temperature, and not to undervolting. So, I can't help in your case. Sorry.

Ok, Thanks anyway.

Link to comment
Share on other sites

  • 2 weeks later...

Hi @Klem,

 

Would you help me with this?

I have replaced amd8970m to Nvidia gtx970m 6GB.I have bought it from ebay, it was originally on Clevo P370SM-A, and I have laptop Clevo P150SM-A.imageproxy.php?img=&key=f8850ecfbcdddcc4 Bios version 1.03.09,  KBC/EC version 1.03.08

Vbios version 84.04.48.00.21, Device ID 10DE 1618- 1558 5281 Laptop bios does not recognises card, and Device ID is not on the inf list. W10 drivers install unsucsesfull, managed to get it on W7, but apps requiring Nvidia card not working.

Can this card be reflashed to work on my laptop?

Could upload images, but not allowed.

Thanks for your help, give a shout if you need more info.

Edited by asteroidb
Link to comment
Share on other sites

  • Bios Modder
9 hours ago, belkin said:

Hi Clem, I want to remove the limit at +135 and unlock the voltage on my MX 110. What do I need for this?

Hi!

What the laptop model?

Link to comment
Share on other sites

  • Bios Modder
17 minutes ago, belkin said:

Asus vivobook x540ubr

Post here your bios backup and your screenshot in Nvidia Inspector utility (full window with overclocking sliders). I'll take a look.

For creating backup of bios you can use attached backup tool. Extract attached archive directly on the Desktop and run backup tool as Administrator (right click mouse). Program will create archive "results" directly on the Desktop. Post here this archive "results" or upload it into any fileserver and post the link.

https://www.sendspace.com/file/bhbprh

 

or

 

https://files.fm/u/qyf9r9c2

 

Link to comment
Share on other sites

27 minutes ago, Klem said:

Post here your bios backup and your screenshot in Nvidia Inspector utility (full window with overclocking sliders). I'll take a look.

For creating backup of bios you can use attached backup tool. Extract attached archive directly on the Desktop and run backup tool as Administrator (right click mouse). Program will create archive "results" directly on the Desktop. Post here this archive "results" or upload it into any fileserver and post the link.

https://www.sendspace.com/file/bhbprh

 

or

 

https://files.fm/u/qyf9r9c2

 

I can’t get my BIOS using gpu-z and other programs, it says that my BIOS is unreadable. I can only give bios from the official site 

https://drive.google.com/open?id=1ytq5AzBx87BRA8l2yJcgx8rybflD5JJE - picture 

https://drive.google.com/open?id=1vsMvrllJpCT1xutSVx6C9ByZue05POyA bios

Link to comment
Share on other sites

  • Bios Modder
4 minutes ago, belkin said:

I can’t get my BIOS using gpu-z and other programs, it says that my BIOS is unreadable.

For creating backup of bios you can use attached backup tool. Extract attached archive directly on the Desktop and run backup tool as Administrator (right click mouse). Program will create archive "results" directly on the Desktop. Post here this archive "results" or upload it into any fileserver and post the link.

https://www.sendspace.com/file/bhbprh

 

or

 

https://files.fm/u/qyf9r9c2

 

 

4 minutes ago, belkin said:

I can only give bios from the official site 

I don't need it.

Edited by Klem
Link to comment
Share on other sites

12 minutes ago, Klem said:

For creating backup of bios you can use attached backup tool. Extract attached archive directly on the Desktop and run backup tool as Administrator (right click mouse). Program will create archive "results" directly on the Desktop. Post here this archive "results" or upload it into any fileserver and post the link.

https://www.sendspace.com/file/bhbprh

 

or

 

https://files.fm/u/qyf9r9c2

 

 

I don't need it.

I do not understand your message, I am not a native speaker of English, I do not know it well. Here is a link to the results 

https://drive.google.com/open?id=1wt72xqTB3GPTdyOhDUKL5R5NcDJYliXM

Link to comment
Share on other sites

  • Bios Modder
1 hour ago, belkin said:

I do not understand your message, I am not a native speaker of English, I do not know it well. Here is a link to the results 

https://drive.google.com/open?id=1wt72xqTB3GPTdyOhDUKL5R5NcDJYliXM

Well, I checked your bios, it's protected against write any modified/unlocked bios.

In this case only two ways:

1. We can try to disable this protection.

2. You will need to flash unlocked bios with hardware SPI programmer (like CH341A).

Link to comment
Share on other sites

5 minutes ago, Klem said:

Ну, я проверил ваш BIOS, он защищен от записи любых модифицированных / разблокированных BIOS.

В этом случае только два пути:

1. Мы можем попытаться отключить эту защиту.

2. Вам нужно будет прошить разблокированный BIOS с помощью аппаратного SPI-программатора (например, CH341A).

"Try to unlock" and "flash the programmer" are two different things? If so, am I risking anything when trying to unlock?

Link to comment
Share on other sites

  • Bios Modder
5 minutes ago, belkin said:

"Try to unlock" and "flash the programmer" are two different things?

Please, read my previous post carefully. I wrote:

"... In this case only two ways:

1. We can try to disable this protection.

2. You will need to flash unlocked bios with hardware SPI programmer (like CH341A)."

 

5 minutes ago, belkin said:

If so, am I risking anything when trying to unlock?

No, but method may be too difficult for you.

Edited by Klem
Link to comment
Share on other sites

8 minutes ago, Klem said:

Пожалуйста, внимательно прочитайте мой предыдущий пост. Я написал:

«... в этом случае только два пути:

1. Мы можем попытаться отключить эту защиту.

2. Вам нужно будет прошить разблокированный BIOS с помощью аппаратного SPI-программатора (например, CH341A). "

 

Нет, но метод может быть слишком сложным для вас.

if I really do not risk getting a "dead" laptop, then I agree to try to unlock. I don’t think that it will be very difficult for me. What is needed for this?

Link to comment
Share on other sites

  • Bios Modder
18 hours ago, belkin said:

if I really do not risk getting a "dead" laptop, then I agree to try to unlock. I don’t think that it will be very difficult for me. What is needed for this?

Ok, download attached archive.

Extract it directly on Desktop.

Format any USB flash drive into FAT32, then put the folder EFI to the your already formatted USB flash drive. 
It should create a folder structure like this:

F:\EFI\BOOT\BOOTX64.EFI

 

Go in bios setup menu, search and disable "Secure Boot" option.

Then plug created USB flash drive into laptop and try to boot laptop from USB flash drive.

If you did all things correct, then you should see a message saying something like:


Code:
Welcome to GRUB!
Entering rescue mode...
error: file not found
grub rescue>

 

Edited by Klem
Link to comment
Share on other sites

1 hour ago, Klem said:

Ok, download this archive:  https://files.fm/u/ffuer35v

Extract it directly on Desktop.

Format any USB flash drive into FAT32, then put the folder EFI to the your already formatted USB flash drive. 
It should create a folder structure like this:

F:\EFI\BOOT\BOOTX64.EFI

 

Go in bios setup menu, search and disable "Secure Boot" option.

Then plug created USB flash drive into laptop and try to boot laptop from USB flash drive.

If you did all things correct, then you should see a message saying something like:


Code:
Welcome to GRUB!
Entering rescue mode...
error: file not found
grub rescue>

 

Am I doing something wrong? Writes to press tab after clicking this happens. What am I doing wrong? here the photo for some reason does not load, here are the links 

https://drive.google.com/open?id=10QEOcp_3B_ZBMVbMgMys7k9kX0yBgJml  

https://drive.google.com/open?id=12vNhNHLUSd4l9Kz34qTh7guzqon2BBvj

Edited by belkin
Link to comment
Share on other sites

  • Bios Modder
2 minutes ago, belkin said:

Am I doing something wrong? Writes to press tab after clicking this happens. What am I doing wrong?

Post screenshot.

Link to comment
Share on other sites

  • Bios Modder
2 minutes ago, belkin said:

photos by links, I can’t upload here, it gives an error ...
If it is important, I can try to upload to the forum again

I don't see your link.

Link to comment
Share on other sites

  • Bios Modder
6 minutes ago, belkin said:

On screenshot all looks like ok.

Now that you have the GRUB console, you need to enter the following two commands:

setup_var 0x963 0x0


setup_var 0xF66 0x0

 

After each command press Enter button.

Please note: Your system may seem to lockup after you enter each of these commands. The first setup_var may never seem to finish.
Give it a few minutes and if nothing happens, force-reboot the machine and redo step 4 to get back to the GRUB console.
Once there, enter the second setup_var command and allow the same to happen. If nothing happens again, just give it a few minutes then force restart the machine.

After you have done both of these commands restart the machine and boot into Windows as normal.

Then run backup tool again, and send me new "results".
 

Link to comment
Share on other sites

18 minutes ago, belkin said:

Новая папка.7zaccidentally sent it

7 minutes ago, Klem said:

На скриншоте все выглядит нормально.

Теперь, когда у вас есть консоль GRUB, вам нужно ввести следующие две команды:

setup_var 0x963 0x0


setup_var 0xF66 0x0

 

После каждой команды нажмите кнопку Enter.

Обратите внимание: может показаться, что ваша система заблокирована после ввода каждой из этих команд. Первый setup_var может никогда не закончиться.
Дайте ему несколько минут, и если ничего не произойдет, перезагрузите машину и повторите шаг 4, чтобы вернуться к консоли GRUB.
Оказавшись там, введите вторую команду setup_var и позвольте этому произойти. Если ничего не происходит снова, просто подождите несколько минут, затем перезапустите машину.

После того, как вы выполнили обе эти команды, перезагрузите компьютер и загрузитесь в Windows как обычно.

Затем снова запустите инструмент резервного копирования и пришлите мне новые «результаты».
 

Sorry, because of my English I didn’t really understand, restart after each command?

Edited by belkin
Link to comment
Share on other sites

  • Bios Modder
4 minutes ago, belkin said:

Sorry, because of my English I didn’t really understand, restart after each command?

No! Just press the "Enter" key after each command.

Link to comment
Share on other sites

  • Bios Modder
9 minutes ago, belkin said:

Now run backup tool again, and send me new "results". I'll take a look, if now protection gone.

Edited by Klem
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.