Jump to content
EwinRacing Flash Series Gaming Chairs
Jacksoft

BIOS and EC firmware modding questions

Recommended Posts

Hi, I'm new!

Firstly sorry for my, very, bad english.

I've already unlocked some hidden menus in my VAIO's BIOS (AMI Aptio), but didn't flashed yet.

I have some question about BIOS/EC modding.

In BIOS I don't have any menu about UEFI boot (neither in Strings section). Could be possible to add it?

What are the advantages in modding EC firmware? There's a tool to do this or is possible only via hex editor? Any link to a good guide?

(I have some troubles with Windows 8, could be fixed with an EC mod?)

Thanks!!!

PS: I have a full dump of both BIOS flash and EC flash, made with an SPI R/W device.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By mssfss
      hi,
       
      I need a help to remove whitelist from bios to install my new wlan.
       
      model :lenovo g405 
       
      thanks.
       
       
      https://www.sendspace.com/file/7gvm11
    • By blaz_evic
      Hello

      I upgraded my old laptop with i7-3632qm and its working fine, temps are ok but he wont boost. Lenovo g500s could be bought with i7-3632qm and it had same cooling as was 2020m so i dont think cooling is problem. Can i bios unlock? I cant acces advanced settings in bios. i need help

      thanks
    • By felipe001998
      Hello fellow technicians, I have acer e1-531 that after installing an i5 (from factory it comes with a celeron b960) started to shut down after 30 minutes, searching the internet I found that it would be necessary to make a modification in the bios to accept this processor, could someone help me with this case?
    • By TetroM
      Hello everyone,
      My new laptop Thunderobot Zero 11800H_RTX3060 have a locked bios. I tried CPU undervolt via ThrottleStop utility and Intel XTU utility, but they didn't work. I heard I need to unlock advanced settings in BIOS to unlock these utilities. So, I need help to unlock hidden advanced settings. Thanks!
    • By laxus
      i want to ask two favours and a question from this community ..
       
      1.) Can someone mod my 940 mx to increase the target temperature and allow higher overclocking than 135hzband voltage control
       
      2.) Allowing my i5 7200U to be undervolted to reduce overall heat 
       
      The question : I repasted my gpu and cpu cleaned it thoroughly, made sure twice everything is connected properly, use a cooling pad and yet the upper portion of my chasis above f1-f12 keys is so hot that i can roast peanuts on it. 
       
      (if i left out any info or missed something please reply i would really love to have a page that has everything for people who have this laptop specifically for light gaming.)
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.