Jump to content
EwinRacing Flash Series Gaming Chairs
cresterk

GT70 VDDC dropping after a short while.

Recommended Posts

I have a GT70 0ND with a gtx675mx. According to gpu-z my vddc drops from 1.025V to 1.000V after about 2 minutes of gaming. If turbo is activated, it drops from 1.0370V to 1.0120V. Same thing when happens on default or overclocked. Temps are low enough ( below 65C ). Is this normal? Or is something really wrong with my laptop?

http://gpuz.techpowerup.com/13/10/03/263.png

http://gpuz.techpowerup.com/13/10/03/dt4.png

here are a two screenshots before and afterward.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By wengmugmug
      I got myself a GT70 (one with 675mx and 3630QM) but the stock settings were not good enough so I tried overclocking the GPU to see if i can get better performance. Using afterburner, I get around 800mhz for the core and +650 to the memory, but I think it can go a little more temps are still fine at around 75-80C under load (CPU goes way up to around 90C ) so I wondered if there's any way to overclock the core further cuz it seems to have reached its limit for the memory.
      PS. I have no experience with flashing vbios or modding. So please keep it simple guys
    • By soad525
      I am using msi afterburner to overclock the 675mx on my ibuypower cz-17 (i am pretty sure it uses the same hardware as msi)
      When i do so GPU-z Gives me weird results.
      The results that i am getting seem like the core clock is stuck at 653mghz when it should be 800mghz. The is room in the gpu-z graph to go up when overclocking is enabled.
      i tried all the power save options to max performance. I also tried to lock voltage. No good.
      I cant flash a vbios because i cant find one (other then the one on this site that i cannot download )
      if anyone has a suggestion or a link to a download for the 4gb 675mx bios let me know.
    • By soad525
      I have noticed that my GPU clock is stock at the max default clock. I am trying to mod my bios file but no application can find settings for it.
      If anyone has a suggestion on modding or a bios file for the 675mx 4gb that is enabled for overclocking let me know.
      My computer is a ibuypower computer, so its a little different than the msi version. I am kinda down that there is little to no support on my computer hardware.
      I have my bios uploaded, if anyone wants to see if they have any luck moding it. (right now i have it being OC to +135mghz core and +750mghz mem but its locked to default by bios)
      also, i cannot download files from this forum... it would be so awesome if i could.. or have alternative file downloading options?
      GK104.zip
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.