J95 Posted September 30, 2013 Share Posted September 30, 2013 This Game Ready driver is recommended for GeForce owners playing the Battlefield 4 open beta. Performance BoostIncreases performance for GeForce 400/500/600/700 Series GPUs in several PC games when compared to the GeForce 327.23 WHQL drivers.Software Modules NVIDIA PhysX System Software - v9.13.0725. HD Audio Driver - version 1.3.26.4. GeForce Experience - version 8.3.14.1GraphicsImplemented Horizon Based Ambient Occlusion plus (HBAO+) for DirectX 9 and DirectX 11 applications. Visit GeForce.com for more info about HBAO+.OpenGLAdded support for OpenG 4.4NVIDIA SLI TechnologyAdded or updated the following profiles:• Assassin's Creed IV: Black Flag - updated• Batman: Arkham Origins - updated;• Battlefield 3 - updated• Battlefield 4 - updated• Crisis - added SLI profile;• Dirty Bomb - added profile for DirectX 9 • Dying Light - added profile for DirectX 11• F1 2013 - updated• FIFA 14 - added SLI profile, • Natural Selection 2 - added profile for DirectX 11• Outlast - added profile for DirectX 9 • Space Hulk - updated• Splinter Cell: Blacklist - updated• State of Decay - added profile for DirectX 9• Watch Dogs - added profile for DirectX 11• Crysis 3 - added AO profile• FIFA 14 - added O profile "Bugs for 331.40 - 1379957 - TDR in SLI mode with UEFI enabled upon reboot/driver install (will be fixed in next beta release. Disable UEFI as temporary workaround)"Fixes Since Previous WHQL Driver Version 327.23[OpenGL][solidworks Flow Simulation plugin]: Some features of the plugin do not work. [1368330][GeForce 6/7 Series]: GPU clock speed does not get higher than 405 MHz. [1356542][sLI][splinter Cell Blacklist]: TXAA option is missing when SLI is enabled. [1353668][surround]: Driver installation fails if NVIDIA Surround is enabled.[1353369][3D Vision][Rainbow Six: Raven Shield]: Stereoscopic 3D works for the game only if played in windowed mode. [1318923][Multi-GPU]: After clicking the Multi-GPU balloon message to open the NVIDIA Control Panel, pressing F1 does not open the Help. [1349589][stereoscopic 3D]: After switching the refresh rate switched to 120 Hz using the NVIDIA Control Panel and then running a 3D stereo application, the refresh rate automatically switches back to the previous refresh rate upon closing the 3D stereo app. [1343087][3D Surround], 3xGeForce 500/400 Series: When sending output to a fourth display outside of the GPU Surround group, the Surround resolution (3-wide) switches to a non-Surround resolution (single display). [736859][Quad SLI] [GeForce GTX 295]: “SLI connector is missing” balloon pops up even if the SLI bridge connector is attached.[919269]Display Driver Uninstaller (DDU) V7.7.1 / first uninstall option.GeForce 331.40 - BETA Drivernvdmn.inf_M17XR2_R3_R4_3D_M18XR1_R2_GTX680M_GTX780M_v331.40.zip 5 Link to comment Share on other sites More sharing options...
Docter Posted October 1, 2013 Share Posted October 1, 2013 This Game Ready driver is recommended for GeForce owners playing the Battlefield 4 open beta. Performance BoostIncreases performance for GeForce 400/500/600/700 Series GPUs in several PC games when compared to the GeForce 327.23 WHQL drivers.Software Modules NVIDIA PhysX System Software - v9.13.0725. HD Audio Driver - version 1.3.26.4. GeForce Experience - version 8.3.14.1GraphicsImplemented Horizon Based Ambient Occlusion plus (HBAO+) for DirectX 9 and DirectX 11 applications. Visit GeForce.com for more info about HBAO+.OpenGLAdded support for OpenG 4.4NVIDIA SLI TechnologyAdded or updated the following profiles:• Assassin's Creed IV: Black Flag - updated• Batman: Arkham Origins - updated;• Battlefield 3 - updated• Battlefield 4 - updated• Crisis - added SLI profile;• Dirty Bomb - added profile for DirectX 9 • Dying Light - added profile for DirectX 11• F1 2013 - updated• FIFA 14 - added SLI profile, • Natural Selection 2 - added profile for DirectX 11• Outlast - added profile for DirectX 9 • Space Hulk - updated• Splinter Cell: Blacklist - updated• State of Decay - added profile for DirectX 9• Watch Dogs - added profile for DirectX 11• Crysis 3 - added AO profile• FIFA 14 - added O profile "Bugs for 331.40 - 1379957 - TDR in SLI mode with UEFI enabled upon reboot/driver install (will be fixed in next beta release. Disable UEFI as temporary workaround)"Fixes Since Previous WHQL Driver Version 327.23[OpenGL][solidworks Flow Simulation plugin]: Some features of the plugin do not work. [1368330][GeForce 6/7 Series]: GPU clock speed does not get higher than 405 MHz. [1356542][sLI][splinter Cell Blacklist]: TXAA option is missing when SLI is enabled. [1353668][surround]: Driver installation fails if NVIDIA Surround is enabled.[1353369][3D Vision][Rainbow Six: Raven Shield]: Stereoscopic 3D works for the game only if played in windowed mode. [1318923][Multi-GPU]: After clicking the Multi-GPU balloon message to open the NVIDIA Control Panel, pressing F1 does not open the Help. [1349589][stereoscopic 3D]: After switching the refresh rate switched to 120 Hz using the NVIDIA Control Panel and then running a 3D stereo application, the refresh rate automatically switches back to the previous refresh rate upon closing the 3D stereo app. [1343087][3D Surround], 3xGeForce 500/400 Series: When sending output to a fourth display outside of the GPU Surround group, the Surround resolution (3-wide) switches to a non-Surround resolution (single display). [736859][Quad SLI] [GeForce GTX 295]: “SLI connector is missing” balloon pops up even if the SLI bridge connector is attached.[919269]Display Driver Uninstaller (DDU) V7.7.1GeForce 331.40 - BETA DriverIs it usable for GTX280M as well? Link to comment Share on other sites More sharing options...
J95 Posted October 2, 2013 Author Share Posted October 2, 2013 Is it usable for GTX280M as well?M17xR1 260m/280mnvdmn.inf_M17XR1_GTX260M_280M_v331.40.zip 1 Link to comment Share on other sites More sharing options...
Guest Posted October 2, 2013 Share Posted October 2, 2013 This driver seems pretty good for my system. In case you missed the red text, anyone running SLI with Secure Boot enabled should consider switching to Legacy mode before attempting to use this driver. Link to comment Share on other sites More sharing options...
link3rd Posted October 2, 2013 Share Posted October 2, 2013 should i use this or the 327.23? Link to comment Share on other sites More sharing options...
Founder Brian Posted October 2, 2013 Founder Share Posted October 2, 2013 should i use this or the 327.23?For BF4 or in general? Link to comment Share on other sites More sharing options...
link3rd Posted October 3, 2013 Share Posted October 3, 2013 For BF4 or in general? general... for the best gaming results i should use the 327.23.......... and bf4 ONLY, i should use the 331.40? sooooooo, i installed the 331.40 drivers right... and i switch on gpuz to see what's up and i see this: any idea what that is? my guess is that its just saying that the card's not running at full or something and doesnt limit the card when i play a game because when i play a game, the bar drops to nothing. Link to comment Share on other sites More sharing options...
J95 Posted October 3, 2013 Author Share Posted October 3, 2013 general... for the best gaming results i should use the 327.23.......... and bf4 ONLY, i should use the 331.40?sooooooo, i installed the 331.40 drivers right... and i switch on gpuz to see what's up and i see this: [ATTACH=CONFIG]9126[/ATTACH] any idea what that is? my guess is that its just saying that the card's not running at full or something and doesnt limit the card when i play a game because when i play a game, the bar drops to nothing. No worries... shows what is limiting performance, 'Util' GPU not fully utilized so it downclocks. Link to comment Share on other sites More sharing options...
link3rd Posted October 3, 2013 Share Posted October 3, 2013 No worries... shows what is limiting performance, 'Util' GPU not fully utilized so it downclocks. U got this also? I noticed that the limit drops to zero while gaming. Is this something similar to turbo boost for CPUs? But opposite. I.e. It downclocks when not at load then goes back to normal when in game? Link to comment Share on other sites More sharing options...
Dustydelux Posted October 3, 2013 Share Posted October 3, 2013 The watch dogs support do you that includes a SLI profile? Link to comment Share on other sites More sharing options...
buellersdayoff Posted October 7, 2013 Share Posted October 7, 2013 hey guys, i need to make make a few posts to download this file, just put 780m in my m17xr4 3d, driver does not detect card (a12 bios shows nvidia card). Do we need to do this every time we update drivers? Thanks Link to comment Share on other sites More sharing options...
Dustydelux Posted October 7, 2013 Share Posted October 7, 2013 J95 thanks for posting the 280m' INF do you regularly make INF's for those GPU'S? Link to comment Share on other sites More sharing options...
link3rd Posted October 8, 2013 Share Posted October 8, 2013 hey guys, i need to make make a few posts to download this file, just put 780m in my m17xr4 3d, driver does not detect card (a12 bios shows nvidia card). Do we need to do this every time we update drivers? ThanksNo, once u have the modded driver, just install it like u normally would. 1 Link to comment Share on other sites More sharing options...
Guest Posted October 9, 2013 Share Posted October 9, 2013 hey guys, i need to make make a few posts to download this file, just put 780m in my m17xr4 3d, driver does not detect card (a12 bios shows nvidia card). Do we need to do this every time we update drivers? Thanks Link to comment Share on other sites More sharing options...
Xeriph Posted October 10, 2013 Share Posted October 10, 2013 having the same issue with 280m sli...since nvidia stopped support of "hybrid" sli basically immediately after releasing it. Link to comment Share on other sites More sharing options...
Xeriph Posted October 10, 2013 Share Posted October 10, 2013 i have one modified inf but it is nvdm.inf and the 327.23 drivers dont have a nvdm.inf they do have an nvdmn.inf... Link to comment Share on other sites More sharing options...
link3rd Posted October 10, 2013 Share Posted October 10, 2013 The caveat is if you have Windows 8, you may need to reboot with Driver Signature Enforcement temporarily disabled.My bad... =(i rolled led my drivers back to 327.23 anyways. The 331.40 was giving me trouble and I bf4 was too laggy anyways. I heard that the the beta is smooth like butter on windows 8.1 and people confirmed almost double the fps when they upgraded from windows 7 - windows 8.1... I however refuse to upgrade to windows 8 just for one game Link to comment Share on other sites More sharing options...
Guest Posted October 11, 2013 Share Posted October 11, 2013 My bad... =(i rolled led my drivers back to 327.23 anyways. The 331.40 was giving me trouble and I bf4 was too laggy anyways. I heard that the the beta is smooth like butter on windows 8.1 and people confirmed almost double the fps when they upgraded from windows 7 - windows 8.1... I however refuse to upgrade to windows 8 just for one game Link to comment Share on other sites More sharing options...
J95 Posted October 12, 2013 Author Share Posted October 12, 2013 M17xR2 GTX 680M, editing nvdmn.inf nvdmn.inf (Dell) v314.22 Device manager>Display Adapters>Details>Device Description>Hardware Ids. 10DE&DEV = Nvidia, 11A0 = GTX 680M, 043A = M17XR2, 1028 = Dell (PCI\VEN_10DE&DEV_11A0&SUBSYS_043A1028) 10DE&DEV = Nvidia, 119F = GTX 780M, 0490 = M17XR3, 1028 = Dell (PCI\VEN_10DE&DEV_119F&SUBSYS_04901028) M17xR2 GTX 680M example. PCI\VEN_10DE&DEV_11A0&SUBSYS_05511028 = M17xR4/60Hz GTX 680M Edit four "sections" 2,3,4,5 (Nvidia drivers v314.22 three sections), look for "%NVIDIA_DEV.11A0.0551.1028% = Section210, PCI\VEN_10DE&DEV_11A0&SUBSYS_05511028" replace 0551 with 043A. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ M17xR1 edit 5 sections, GTX 260M/280M -nvidia drivers v331.40 GTX 260M = 0618 %NVIDIA_DEV.0618.02A2.1028% = Section033, PCI\VEN_10DE&DEV_0618&SUBSYS_02A21028, replace 02A2 with 02A1 GTX 280M = 060A %NVIDIA_DEV.0618.02A2.1028% = Section033, PCI\VEN_10DE&DEV_0618&SUBSYS_02A21028, replace both 0618 / 02A2 with 060A / 02A1 respectively. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- "Sections / Windows versions", [Manufacturer]%NVIDIA_A% = NVIDIA_SetA_Devices,NTamd64.6.0,NTamd64.6.1,NTamd64.6.2,NTamd64.6.3 1 [NVIDIA_SetA_Devices.NTamd64.6.0] %NVIDIA_DEV.0407.01F1.1028% = Section004, PCI\VEN_10DE&DEV_0407&SUBSYS_01F11028 %NVIDIA_DEV.0407.01F2.1028% = Section004, PCI\VEN_10DE&DEV_0407&SUBSYS_01F21028 %NVIDIA_DEV.0407.0228.1028% = Section004, PCI\VEN_10DE&DEV_0407&SUBSYS_02281028 ------------------------------------------------------------------------------------------------------------------------------------- 2 [NVIDIA_SetA_Devices.NTamd64.6.1] %NVIDIA_DEV.0407.019C.1028% = Section001, PCI\VEN_10DE&DEV_0407&SUBSYS_019C1028 %NVIDIA_DEV.0407.01F1.1028% = Section001, PCI\VEN_10DE&DEV_0407&SUBSYS_01F11028 %NVIDIA_DEV.0407.01F2.1028% = Section001, PCI\VEN_10DE&DEV_0407&SUBSYS_01F21028 ------------------------------------------------------------------------------------------------------------------------------------- 3 [NVIDIA_SetA_Devices.NTamd64.6.2] %NVIDIA_DEV.0407.019C.1028% = Section002, PCI\VEN_10DE&DEV_0407&SUBSYS_019C1028 %NVIDIA_DEV.0407.01F1.1028% = Section002, PCI\VEN_10DE&DEV_0407&SUBSYS_01F11028 %NVIDIA_DEV.0407.01F2.1028% = Section002, PCI\VEN_10DE&DEV_0407&SUBSYS_01F21028 ------------------------------------------------------------------------------------------------------------------------------------- 4 [NVIDIA_SetA_Devices.NTamd64.6.3] %NVIDIA_DEV.0407.019C.1028% = Section003, PCI\VEN_10DE&DEV_0407&SUBSYS_019C1028 %NVIDIA_DEV.0407.01F1.1028% = Section003, PCI\VEN_10DE&DEV_0407&SUBSYS_01F11028 %NVIDIA_DEV.0407.01F2.1028% = Section003, PCI\VEN_10DE&DEV_0407&SUBSYS_01F21028 ------------------------------------------------------------------------------------------------------------------------------------- 5 [strings] DiskID1 = "NVIDIA Windows (64 bit) Driver Library Installation Disk 1" NVIDIA = "NVIDIA" NVIDIA_A = "NVIDIA" NVIDIA_DEV.0407.019C.1028 = "NVIDIA GeForce 8600M GT " NVIDIA_DEV.0407.01F1.1028 = "NVIDIA GeForce 8600M GT" NVIDIA_DEV.0407.01F2.1028 = "NVIDIA GeForce 8600M GT " 1 Link to comment Share on other sites More sharing options...
KiMie89 Posted October 16, 2013 Share Posted October 16, 2013 Hi guys..i'm actually kinda new to these whole modded inf thing. i search everywhere for tutorial but nowhere to be found in this nvidia forum.. Plz show me some guide. I have GeForce 675M graphic card with Alienware M17xR3. I'd downloaded the GeForce 331.40 - BETA Driver. What do i need to do next? Here is my hardware ids. Link to comment Share on other sites More sharing options...
J95 Posted October 17, 2013 Author Share Posted October 17, 2013 Hi guys..i'm actually kinda new to these whole modded inf thing. i search everywhere for tutorial but nowhere to be found in this nvidia forum..Plz show me some guide.I have GeForce 675M graphic card with Alienware M17xR3.I'd downloaded the GeForce 331.40 - BETA Driver.What do i need to do next?Here is my hardware ids.[ATTACH=CONFIG]9288[/ATTACH]Install downloaded driver>Extract - Installation failed - close dialog>Browse C:\NVIDIA\DisplayDriver\331.40\Win8_Win7_64\International\Display.Driver folder>open nvdmn.inf Edit four sections 2,3,4,5 (guide previous post) look for %NVIDIA_DEV.1212.0550.1028% = Section388, PCI\VEN_10DE&DEV_1212&SUBSYS_05501028> replace 0550 with 04BARun setup.exe within the extracted \International\ folder.Edit: Are you usng A12 unlocked BIOS ? 04BA shows IGP enabled, after disabling IGP Id changes to 0490.-Enter the A12 unlocked bios [M17x R3] - BIOS A12 'unlocked' & 'SATA tweak' disable the integrated graphics Advanced Menu>Video Configuration>disable IGP>set display to PEG>F10 reboot.A12 Unlocked BIOS http://forum.techinferno.com/downloads.php?do=file&id=28 1 Link to comment Share on other sites More sharing options...
KiMie89 Posted October 17, 2013 Share Posted October 17, 2013 I couldn't find a file name nvdmn.inf in Display.Driver folder. Which one in this picture is nvdmn.inf ? Edit : Found it! Link to comment Share on other sites More sharing options...
KiMie89 Posted October 18, 2013 Share Posted October 18, 2013 Install downloaded driver>Extract - Installation failed - close dialog>Browse C:\NVIDIA\DisplayDriver\331.40\Win8_Win7_64\International\Display.Driver folder>open nvdmn.inf Edit four sections 2,3,4,5 (guide previous post) look for %NVIDIA_DEV.1212.0550.1028% = Section388, PCI\VEN_10DE&DEV_1212&SUBSYS_05501028> replace 0550 with 04BA Run setup.exe within the extracted \International\ folder. Edit: Are you usng A12 unlocked BIOS ? 04BA shows IGP enabled, after disabling IGP Id changes to 0490. -Enter the A12 unlocked bios [M17x R3] - BIOS A12 'unlocked' & 'SATA tweak' disable the integrated graphics Advanced Menu>Video Configuration>disable IGP>set display to PEG>F10 reboot. A12 Unlocked BIOS M17x R3 BIOS A12 - unlocked & 'SATA fix' - Downloads - Tech|Inferno Forums Hi J95. i'm not using any unlocked bios.But now that i knew, i finally did it.But with some questions. 1) What do u mean by disabling IGP?Is it Integrated Graphic Device within your means? 2) If i disable this IGD, does this mean i don't have to install IGD chipset @ Intel HD graphic because having this IGD disable makes no further use for IGD chipset @ Intel HD graphic installation. 3) What is some precaution that i need to take for unlocking A12 bios?I heard people says u cannot run 3D setting or it may break your system. 4) Here is my after unlocking bios hardware ids.Am i doing it right? 5) For editing inf,am i doing it right by just editing these four lines? Before : %NVIDIA_DEV.1212.0550.1028% = Section388, PCI\VEN_10DE&DEV_1212&SUBSYS_05501028 After: %NVIDIA_DEV.1212.0490.1028% = Section388, PCI\VEN_10DE&DEV_1212&SUBSYS_04901028 Before : %NVIDIA_DEV.1212.0550.1028% = Section389, PCI\VEN_10DE&DEV_1212&SUBSYS_05501028 After: %NVIDIA_DEV.1212.0490.1028% = Section389, PCI\VEN_10DE&DEV_1212&SUBSYS_04901028 Before : %NVIDIA_DEV.1212.0550.1028% = Section390, PCI\VEN_10DE&DEV_1212&SUBSYS_05501028 After: %NVIDIA_DEV.1212.0490.1028% = Section390, PCI\VEN_10DE&DEV_1212&SUBSYS_04901028 Before : NVIDIA_DEV.1212.0550.1028 = "NVIDIA GeForce GTX 675M " After: NVIDIA_DEV.1212.0490.1028 = "NVIDIA GeForce GTX 675M " 6) Do i need to alter these too by changing the 05XX to 0490? NVIDIA_DEV.1212.0551.1028 = "NVIDIA GeForce GTX 675M " NVIDIA_DEV.1212.057B.1028 = "NVIDIA GeForce GTX 675M " NVIDIA_DEV.1212.0580.1028 = "NVIDIA GeForce GTX 675M" 7) I accidentally clean all the Nvidia chipset using Driver Sweeper along with Nvidia Display and Nvidia PhysicX. Am i wrong by cleaning the Nvidia chipset because i noticed that after installing the Nvdia driver, the Nvidia chipset is still empty in Driver Sweeper. 8) Now that i'd it installed, i noticed my Video Engine Load in this GPu-Z is still zero as i started playing games and having lots of dropping fps badly 6-7fps. 9) When i opened the HWInfo, i noticed the GPU1 is empty. Is there something wrong? 10) What is the use of the attachment u uploaded on the first place ? (nvdmn.inf_M17XR2_R3_R4_3D_M18XR1_R2_GTX680M_GTX780M_v331.40.zip) Link to comment Share on other sites More sharing options...
J95 Posted October 18, 2013 Author Share Posted October 18, 2013 @KiMie89 Uninstall Intel HD graphics drivers>reboot>F2 BIOS.BIOS settings.Integrated Graphic Device>disabled.Display PEG enabled>F10 save&exit.Uninstall current drivers using Display Driver Uninstaller (DDU) V8.1 / first uninstall option (highly recommended).GeForce 331.40 - BETA DriverEdit four sections 2,3,4,5. (m17xR3 60Hz/Optimus) nvdmn.inf v331.40.Replace both 0551 with 0490[NVIDIA_SetA_Devices.NTamd64.6.1]%NVIDIA_DEV.1212.0551.1028% = Section156, PCI\VEN_10DE&DEV_1212&SUBSYS_05511028 [NVIDIA_SetA_Devices.NTamd64.6.2]%NVIDIA_DEV.1212.0551.1028% = Section391, PCI\VEN_10DE&DEV_1212&SUBSYS_05511028 [NVIDIA_SetA_Devices.NTamd64.6.3]%NVIDIA_DEV.1212.0551.1028% = Section392, PCI\VEN_10DE&DEV_1212&SUBSYS_05511028 DiskID1 = "NVIDIA Windows (64 bit) Driver Library Installation Disk 1"NVIDIA = "NVIDIA"NVIDIA_A = "NVIDIA"NVIDIA_DEV.1212.0551.1028 = "NVIDIA GeForce GTX 675M " replace 0551 with 0490 Link to comment Share on other sites More sharing options...
KiMie89 Posted October 19, 2013 Share Posted October 19, 2013 @KiMie89 Uninstall Intel HD graphics drivers>reboot>F2 BIOS.BIOS settings. Integrated Graphic Device>disabled. Display PEG enabled>F10 save&exit. Uninstall current drivers using Display Driver Uninstaller (DDU) V8.1 / first uninstall option (highly recommended). GeForce 331.40 - BETA Driver Edit four sections 2,3,4,5. (m17xR3 60Hz/Optimus) nvdmn.inf v331.40. Replace both 0551 with 0490 [NVIDIA_SetA_Devices.NTamd64.6.1] %NVIDIA_DEV.1212.0551.1028% = Section156, PCI\VEN_10DE&DEV_1212&SUBSYS_05511028 [NVIDIA_SetA_Devices.NTamd64.6.2] %NVIDIA_DEV.1212.0551.1028% = Section391, PCI\VEN_10DE&DEV_1212&SUBSYS_05511028 [NVIDIA_SetA_Devices.NTamd64.6.3] %NVIDIA_DEV.1212.0551.1028% = Section392, PCI\VEN_10DE&DEV_1212&SUBSYS_05511028 DiskID1 = "NVIDIA Windows (64 bit) Driver Library Installation Disk 1" NVIDIA = "NVIDIA" NVIDIA_A = "NVIDIA" NVIDIA_DEV.1212.0551.1028 = "NVIDIA GeForce GTX 675M " replace 0551 with 0490 Hi. I've done precisely like u described. But there are some problems i've encountered. Every 5 minutes me playing games, the fps drop frequently from 40fps to 5fps.And then it goes back to 40fps. I can't play games with fps dropping badly every 5 minutes. I'd tried with 2 different games which were saint row IV and shadow warrior on high setting. My previous laptop with crossfire 5870 Mobility which was much less performance than my current gtx 675M doesn't seems to be having problem like this. Do u have any ideas on how to fix this? Btw, 2 days ago i'd changed my bios battery but without clearing/resetting my bios. Does clearing/resetting bios have anything to do with stuttering? Edit : Done with resetting bios and disabling multicore rendering by turning off threaded optimization but still the same. Link to comment Share on other sites More sharing options...
Recommended Posts