FGame Posted September 28, 2013 Share Posted September 28, 2013 8970M works in P150EM?If Yes the non enduro VBIOS works? Quote Link to comment Share on other sites More sharing options...
Guest Posted September 28, 2013 Share Posted September 28, 2013 The P1x0EM has a fully muxed chip, so you would want the "Enduro" vBIOS... Quote Link to comment Share on other sites More sharing options...
FGame Posted September 28, 2013 Author Share Posted September 28, 2013 OK.I put a 8970M in P150EM now.Yes its works!But in Bios show : VGA CARD EMPTY When a flash VBIOS to non enduro i receive a error message code 0006 by atiflash. Quote Link to comment Share on other sites More sharing options...
Khenglish Posted September 28, 2013 Share Posted September 28, 2013 OK.I put a 8970M in P150EM now.Yes its works!But in Bios show : VGA CARD EMPTY When a flash VBIOS to non enduro i receive a error message code 0006 by atiflash.Is the laptop beeping at you and shutting down after a few minutes with the 8970m?And is this a Dell 8970m or a clevo 8970m? Quote Link to comment Share on other sites More sharing options...
Guest Posted September 29, 2013 Share Posted September 29, 2013 ...But in Bios show : VGA CARD EMPTY...That's normal as it is not in the device list. Has nothing to do with functionality. Quote Link to comment Share on other sites More sharing options...
FGame Posted October 2, 2013 Author Share Posted October 2, 2013 Is the laptop beeping at you and shutting down after a few minutes with the 8970m?And is this a Dell 8970m or a clevo 8970m?No beepingClevo P150EM Quote Link to comment Share on other sites More sharing options...
grafgever Posted October 31, 2013 Share Posted October 31, 2013 That's normal as it is not in the device list. Has nothing to do with functionality.So the VGA CARD EMPTY has 0 effect on the over-all performance of the GPU? Is it possible to get the Enduro switchable graphics working as well? Quote Link to comment Share on other sites More sharing options...
Khenglish Posted November 4, 2013 Share Posted November 4, 2013 So the VGA CARD EMPTY has 0 effect on the over-all performance of the GPU? Is it possible to get the Enduro switchable graphics working as well?Enduro should work by default. If it wasn't your battery would last only 2 hours at best. You can play around with enduro settings by right clicking on your desktop and clicking "configure switchable graphics". Quote Link to comment Share on other sites More sharing options...
Yoshigure Posted April 12, 2014 Share Posted April 12, 2014 I would like to know if it's possible to do that because i want to upgrade from 7970m to 8970m, only because vram 2gb vs 4gb !So if this works I win in 2 ways first the more vram for games like bf4 (using 1.8gb for now) and second, not too important, an updated card !My question is did I need some especial vbios or a modify bios to make amd 8970m compatible and work well on my clevo P150EM ? Quote Link to comment Share on other sites More sharing options...
makenzius Posted June 11, 2014 Share Posted June 11, 2014 Is the laptop beeping at you and shutting down after a few minutes with the 8970m?And is this a Dell 8970m or a clevo 8970m?I just replaced my broken HD6970M with a new one and my Clevo P150 is now beeping and shuting down after ~1min.You might know what this is about?Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Khenglish Posted June 11, 2014 Share Posted June 11, 2014 Clevo motherboards cannot properly read the temperature sensor on dell amd cards. Amd cards from clevo or msi are fine, and nvidia cards from anyone that are not the 780m or 880m are fine. It sounds like your replacement card was a dell. Quote Link to comment Share on other sites More sharing options...
wer Posted June 15, 2014 Share Posted June 15, 2014 had you checked now the card for dell/nvidea Quote Link to comment Share on other sites More sharing options...
clevo.maniac Posted August 18, 2014 Share Posted August 18, 2014 Clevo HD8970M 4GB work fine with p150em... Quote Link to comment Share on other sites More sharing options...
CEG Team Posted November 1, 2014 Share Posted November 1, 2014 exaclty, we try hd8970m and r9-m290x from Clevo on P150EM, works perfeclty. Quote Link to comment Share on other sites More sharing options...
SMGJohn Posted November 6, 2014 Share Posted November 6, 2014 exaclty, we try hd8970m and r9-m290x from Clevo on P150EM, works perfeclty.Is it possible to get the R9 M290X separate? I can not find a Clevo M290X anywhere on eBay. Quote Link to comment Share on other sites More sharing options...
bauto601 Posted November 7, 2014 Share Posted November 7, 2014 The r9 m290x is a rebranded 8970M. They are exactly the same, my 8970M was magically a r9 m290x after a bios update. The pcb is even the same So you can just go for a 8970M, you miss nothing, you just get the same. Quote Link to comment Share on other sites More sharing options...
CEG Team Posted December 6, 2014 Share Posted December 6, 2014 Is available on eBay.de however for p1xxem or p3xxem is not the same card Quote Link to comment Share on other sites More sharing options...
kostasgreece Posted December 17, 2017 Share Posted December 17, 2017 the 8970m from msi laptop does not working on p150em. I try it yesterday and fans run on full when I open the laptop Quote Link to comment Share on other sites More sharing options...
Improwizz Posted November 3, 2021 Share Posted November 3, 2021 (edited) On 6/11/2014 at 11:22 PM, Khenglish said: Clevo motherboards cannot properly read the temperature sensor on dell amd cards. Amd cards from clevo or msi are fine, and nvidia cards from anyone that are not the 780m or 880m are fine. It sounds like your replacement card was a dell. I need help please, i bought 8970m for my p170sm clevo. My old 8970m died, started having artefacts and thats reason i bought new one. But it seems i got wrong card becouse my laptop starts to make alarm sounds and caps lock, num pad and leds near power button start to blink, after maybe one minute of blinking and sounds laptop turns off.Fans are spinning at max speed also. I have prema bios. I tryed few bios for new graphic card but no help also. I even tryed bios from my old card but nothing. When i put my old dying car back, there is no problem anymore(except i cant use 3d apps becouse card is dying) and i can use pc normaly.Is there anything i can do or try becouse i have waited almost 2 months for card to come, and i really dont want to return it and wait again... This is the card i bought https://www.amazon.com/gp/aw/d/B081D5KG8X?ref=ppx_pt2_mob_b_prod_image As i see by the other posts on forum it seems that either my card is not compatible (it should be), or temperature sensor is faulty (but it works with old card so probably it isnt). I tryed ecu reset also, all things i could find on forums and from people that had similar problem.Graphic card ia recognized in windows and in bios also. I really dont know what else to do and try. I have video of problem if needed i can upload it and put link here. Hope to find some kind of solution, im still a believer haha Thanks for answers Edited November 4, 2021 by Improwizz Added few things Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.