Guest Posted September 28, 2013 Share Posted September 28, 2013 Prema, my boot logo have a weird bug, do you know what is this ?[ATTACH=CONFIG]9100[/ATTACH]That looks actually like something is wrong with that Windows 8 installation. The spinning circle is done by Windows and not the BIOS... Link to comment Share on other sites More sharing options...
Postulho Posted September 28, 2013 Share Posted September 28, 2013 That looks actually like something is wrong with that Windows 8 installation. The spinning circle is done by Windows and not the BIOS...So, any recommendations? My windows works without any errors, just this circle .... Link to comment Share on other sites More sharing options...
Guest Posted September 28, 2013 Share Posted September 28, 2013 So, any recommendations? My windows works without any errors, just this circle ....No idea, is your BIOS CSM set to disabled? Link to comment Share on other sites More sharing options...
Postulho Posted September 29, 2013 Share Posted September 29, 2013 No idea, is your BIOS CSM set to disabled?I really don't know where can I see how the CSM is set. I'm kind of noob in these questions D:, but my system is running in UEFI mode Link to comment Share on other sites More sharing options...
Guest Posted September 29, 2013 Share Posted September 29, 2013 I really don't know where can I see how the CSM is set. I'm kind of noob in these questions D:, but my system is running in UEFI modeOK in BIOS first load setup defaults, then set it to Windows 8 and enable UEFI. If you use RAID set that, too. Save and Exit.If it still looks like that then there is something funny going on with the Windows installation. Link to comment Share on other sites More sharing options...
ujkiop Posted October 1, 2013 Share Posted October 1, 2013 Hi, does the latest W230ST bios enable windows 7 to be installed on the W230ST in UEFI Mode? Link to comment Share on other sites More sharing options...
Guest Posted October 2, 2013 Share Posted October 2, 2013 Hi, does the latest W230ST bios enable windows 7 to be installed on the W230ST in UEFI Mode?Currently running Win 7 & 8.1 in a dual boot UEFI installation without problems on my beta Mod. (Of course Win 7 also works alone in UEFI) Link to comment Share on other sites More sharing options...
ujkiop Posted October 3, 2013 Share Posted October 3, 2013 Currently running Win 7 & 8.1 in a dual boot UEFI installation without problems on my beta Mod. (Of course Win 7 also works alone in UEFI) Thanks for responding and excellent news, win7 refused to boot on the B02 bios in UEFI mode, just BSOD before the installer launched properly. Flashed the B04 bios, as B05 causes win8 to BSOD when using the nvidia graphics (when running wei). Link to comment Share on other sites More sharing options...
andrewff2 Posted October 3, 2013 Share Posted October 3, 2013 sup Prema, any news about the p375sm bios version?!?! Link to comment Share on other sites More sharing options...
Guest Posted October 3, 2013 Share Posted October 3, 2013 sup Prema, any news about the p375sm bios version?!?!They will come one after the W230ST is finished... Link to comment Share on other sites More sharing options...
zymphad Posted October 4, 2013 Share Posted October 4, 2013 Ugh lost BCLK again. Not sure why. I'm on the 8.1.50 ME drivers. Link to comment Share on other sites More sharing options...
nabelo Posted October 4, 2013 Share Posted October 4, 2013 Yes, I can Mod the PxxHM to support the 680M without inf Mods...I also have the 780M "working" in P1x0EM, we will have to see about the HMs...right now I am far too busy with Haswell Mods... Whoo..Sounds good. What do you need from us so you can provide such a HM Mod for us. I really love to have such an bios for my P150HM. To mod the .inf everytime a news nvidia driver comes out is very annoying :-P Best regards, Manuel 1 Link to comment Share on other sites More sharing options...
jarod10 Posted October 4, 2013 Share Posted October 4, 2013 Thank a lot Prema for your works on Clevo computer! I have a P170HM3 and I'm waiting for a 780m on it (with 3D if possible) Link to comment Share on other sites More sharing options...
Guest Posted October 4, 2013 Share Posted October 4, 2013 Whoo..Sounds good. What do you need from us so you can provide such a HM Mod for us. I really love to have such an bios for my P150HM. To mod the .inf everytime a news nvidia driver comes out is very annoying :-PBest regards, Manuel What I need? More time on my hands. Thank a lot Prema for your works on Clevo computer! I have a P170HM3 and I'm waiting for a 780m on it (with 3D if possible) I also own a P170HM3 as my main system, so will do my best to get that combo going... Link to comment Share on other sites More sharing options...
jransome1 Posted October 5, 2013 Share Posted October 5, 2013 Hi i am new to all this and have been looking for a way to turn off Hyperthreading on my W170ER for some time now. I tried out flashing your Bios this morning and it has worked a treat.I am now able to turn off Hyperthreading and now my software issue has gone away. ThanksI also have a newer model W370ST and would like to turn Hyperthreading off on this. Do you have a custom Firmware for it?ThanksJames Link to comment Share on other sites More sharing options...
zymphad Posted October 6, 2013 Share Posted October 6, 2013 PREMA, please tell me how to get my BCLK unlock back. Thanks. Link to comment Share on other sites More sharing options...
Khenglish Posted October 6, 2013 Share Posted October 6, 2013 PREMA, please tell me how to get my BCLK unlock back. Thanks. Link to comment Share on other sites More sharing options...
retmas Posted October 6, 2013 Share Posted October 6, 2013 Dear Prema, Many thanks for this huge work at BIOS modifications! I've just flashed Prema's Mod BIOS for my Sager N9130 (Clevo P151EM1). It's OK! But there is small thing: before update I used "Intel rapid storage technology" to accelerate my HDD throught the cache from second SSD. In my system there are two SSDs (Vertex4, M4-mSATA) and one HDD (1Tb Toshiba). So, before update in my BIOS the option "RAID Mode" (SATA Mode) was ON. But after update I can't boot to my Windows 8 (UEFI Mode, Secure Mode is OFF) because no boot device has been detected. If I press F7 during starting of system the list of devices is empty (see screenshot, there is only one option: "Enter setup"). So, in this case Windows doesn't boot and after starting of system BIOS setup shows up always. Any suggestions? How to fix it? Thanks! Link to comment Share on other sites More sharing options...
zymphad Posted October 6, 2013 Share Posted October 6, 2013 Did you install a new intel graphics driver? I have found that to kill off BCLK. Reinstalling XTU should get it back. Link to comment Share on other sites More sharing options...
junky77 Posted October 6, 2013 Share Posted October 6, 2013 So the W230ST modded bios is not out yet? Link to comment Share on other sites More sharing options...
dre dre Posted October 6, 2013 Share Posted October 6, 2013 hey everyone and prema. new to this forum. is there a modified bios for the NP9380-s? i did not see one in the prema mod list. Does any one know how to install the custom vbios for the sli nvidia70m? Link to comment Share on other sites More sharing options...
TAU Posted October 6, 2013 Share Posted October 6, 2013 Prema can i make it work in dual channel P150EM 4Gb+4Gb=8Gb 2133MHz T2 ? (KHX2133C12S3/4G) Slot 1+2 = bad load bios (channel A+ Slot 2+4 = bad load bios (channel B+ Slot 1+3 = single channel 2133MHz T2 (channel A+A) Bios P150EM/NP9150Prema Mod v2 (P150EM_17_11_PM_v2_2T) Link to comment Share on other sites More sharing options...
Guest Posted October 6, 2013 Share Posted October 6, 2013 Dear Prema,Many thanks for this huge work at BIOS modifications! I've just flashed Prema's Mod BIOS for my Sager N9130 (Clevo P151EM1). It's OK! But there is small thing: before update I used "Intel rapid storage technology" to accelerate my HDD throught the cache from second SSD. In my system there are two SSDs (Vertex4, M4-mSATA) and one HDD (1Tb Toshiba). So, before update in my BIOS the option "RAID Mode" (SATA Mode) was ON. But after update I can't boot to my Windows 8 (UEFI Mode, Secure Mode is OFF) because no boot device has been detected. If I press F7 during starting of system the list of devices is empty (see screenshot, there is only one option: "Enter setup"). So, in this case Windows doesn't boot and after starting of system BIOS setup shows up always. Any suggestions? How to fix it? Thanks! [ATTACH=CONFIG]9180[/ATTACH] Try to load setup defaults then set it to Win 8 and save end exit the BIOS menu. Next time you enter BIOS select and set your boot device directly in BIOS boot order page. Should be called "Windows Bootloader" if it's installed in Win8 UEFI mode. Prema can i make it work in dual channel P150EM 4Gb+4Gb=8Gb 2133MHz T2 ? (KHX2133C12S3/4G) Slot 1+2 = bad load bios (channel A+ Slot 2+4 = bad load bios (channel B+ Slot 1+3 = single channel 2133MHz T2 (channel A+A) Bios P150EM/NP9150Prema Mod v2 (P150EM_17_11_PM_v2_2T) Sometime it helps to switch RAM modules around a bit. So while module A won't work in slot X module B may get the job done. Link to comment Share on other sites More sharing options...
lastnikita Posted October 7, 2013 Share Posted October 7, 2013 Hi Prema, hope you're doing fine.If you're interested (hope so ^^), here is a modified w230 .04 EC from mySN.They apparently tuned the fan tables to deal with the fan burst issue, maybe you can try that on .05 EC ? =)http://www.mysn.de/secure/userarea/download.asp?flag=getfile&file=QQXMGQQXMG_P303QQBIOSQQXMG_P303_EC_1.00.4TR.zip Link to comment Share on other sites More sharing options...
Guest Posted October 7, 2013 Share Posted October 7, 2013 Hi Prema, hope you're doing fine.If you're interested (hope so ^^), here is a modified w230 .04 EC from mySN.They apparently tuned the fan tables to deal with the fan burst issue, maybe you can try that on .05 EC ? =)http://www.mysn.de/secure/userarea/download.asp?flag=getfile&file=QQXMGQQXMG_P303QQBIOSQQXMG_P303_EC_1.00.4TR.zipThat's an older release candidate beta EC, the v5 EC values originated from it like a week later...EDIT: EC4TR was finalized on 6th of August while EC5 on the 14th. Link to comment Share on other sites More sharing options...
Recommended Posts