Guest Posted September 2, 2015 Share Posted September 2, 2015 The stock version that I've uploaded for you maybe for a different board version. Try to flash the Mod version. Link to comment Share on other sites More sharing options...
webster023 Posted September 2, 2015 Share Posted September 2, 2015 The stock version that I've uploaded for you maybe for a different board version. Try to flash the Mod version.We first tried to re-flash the modded g-sync vbios below and it went in fine with no mismatch ID errors, but with the same result as originally - black screen upon reboothttps://biosmods.wordpress.com/gtx9-g/8GB MXM GTX980M-G: Link to comment Share on other sites More sharing options...
Guest Posted September 3, 2015 Share Posted September 3, 2015 We first tried to re-flash the modded g-sync vbios below and it went in fine with no mismatch ID errors, but with the same result as originally - black screen upon reboothttps://biosmods.wordpress.com/gtx9-g/8GB MXM GTX980M-G:Are you 100% that he flashed the g-sync system BIOS and not the one for the regular model?Usually if we cross-flash regular and g-sync versions it'll result in black screen on boot.I am traveling atm and can't really access my files. Please drop me a mail (in your PM) so we can figure this out. Link to comment Share on other sites More sharing options...
webster023 Posted September 3, 2015 Share Posted September 3, 2015 Are you 100% that he flashed the g-sync system BIOS and not the one for the regular model?Usually if we cross-flash regular and g-sync versions it'll result in black screen on boot.I am traveling atm and can't really access my files. Please drop me a mail (in your PM) so we can figure this out.Sent you an email Prema, Yes, he couldn't get the NEW stock bios to work (board ID mismatch) so he ended up trying the modded g-sync bios which went in ok but still resulted in black screen.Here is the modded g-sync bios he tried - https://mega.nz/#!CNdkzDia!<wbr>q4q83PXLzw1lbp0IGlizOrbuTnKLLZ<wbr>iZfrRxnc5dH6QHere is the stock g-sync bios which resulted in the board ID mismatch - https://mega.nz/#!yMUlGaYR!FQH1nDXrkdLfYYisDPyDM_jxTFshLksEmvxRmcGVg8g Link to comment Share on other sites More sharing options...
alexiv Posted September 4, 2015 Share Posted September 4, 2015 Have any one nvflash dump from 8GB MXM GTX980M-G?In service center reflashed STOCK and MOD version via jtag but laptop(P770ZM-G) don’t start.With replacement video card all work fine. Link to comment Share on other sites More sharing options...
Guest Posted September 4, 2015 Share Posted September 4, 2015 Have any one nvflash dump from 8GB MXM GTX980M-G?In service center reflashed STOCK and MOD version via jtag but laptop(P770ZM-G) don’t start.With replacement video card all work fine.They have to manually add the padding bytes to fill the entire 256kb of the flash-chip. A regular dump won’t contain those.I have added them here for you to re-program the chip:https://mega.nz/#!CFMDCSpR!_2XHZK27X6YsljEhWxPlrEFSpNaZYA–H3T7_OwhfcE Link to comment Share on other sites More sharing options...
alexiv Posted September 4, 2015 Share Posted September 4, 2015 They have to manually add the padding bytes to fill the entire 256kb of the flash-chip. A regular dump won’t contain those.I have added them here for you to re-program the chip:https://mega.nz/#!CFMDCSpR!_2XHZK27X6YsljEhWxPlrEFSpNaZYA–H3T7_OwhfcEThank, notebook work. But i don't know they use this rom or extracted with GPU-Z from P771ZM-Gsync 980M.84.04.48.00.1C Link to comment Share on other sites More sharing options...
mks007 Posted September 5, 2015 Share Posted September 5, 2015 Hi pleas anybody help , i have just flashed my bios , and instead p177sm i have flashed p177sm-a bios , now my screen is black and i cant use my laptop. is there any way i can fix it. And if there is can anybody explain to me how ? or is the laptop good to put in bin now ? Thank you Link to comment Share on other sites More sharing options...
Guest Posted September 5, 2015 Share Posted September 5, 2015 Hi pleas anybody help , i have just flashed my bios , and instead p177sm i have flashed p177sm-a bios , now my screen is black and i cant use my laptop. is there any way i can fix it. And if there is can anybody explain to me how ? or is the laptop good to put in bin now ? Thank youWhat files did you use to flash?Did you only flash the BIOS or also the ME and EC? Link to comment Share on other sites More sharing options...
mks007 Posted September 5, 2015 Share Posted September 5, 2015 What files did you use to flash?Did you only flash the BIOS or also the ME and EC?Hello Prema i have used , the bios from your web site p177sm-a , started with the step1 then laptop restarted it self and then managed to start step2 , all was going well until laptop restarted it self again and then since then i have black screen and i can do anything. Any help will be more then welcome.Thank you Link to comment Share on other sites More sharing options...
Guest Posted September 5, 2015 Share Posted September 5, 2015 <!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:PunctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> <w:DontGrowAutofit/> </w:Compatibility> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--> have used step1 and step2 , from this files ---> https://biosmods.wordpress.com/p177sm-a/Step1 when without any problems i have managed afterwards to boot the pen drive and do the step2 when that have flashed laptop have restarted but since that i have only black screen. Pleas can anybody help ? <!--[if gte mso 9]><xml> <w:LatentStyles DefLockedState="false" LatentStyleCount="156"> </w:LatentStyles> </xml><![endif]--><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:Standardowy; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} </style> <![endif]--> Hmm, we tested cross-flashing SM/SM-A before and the result, while not working properly and having broken keyboard backlights etc, at least didn't brick the system. So there is hope. Please make a CMOS reset (not recovery) and keep the proper files ready on the USB in case it boots up: https://biosmods.wordpress.com/bios-recovery/ Link to comment Share on other sites More sharing options...
mks007 Posted September 5, 2015 Share Posted September 5, 2015 Hmm, we tested cross-flashing SM/SM-A before and the result, while not working properly and having broken keyboard backlights etc, at least didn't brick the system. So there is hope. Please make a CMOS reset (not recovery) and keep the proper files ready on the USB in case it boots up: https://biosmods.wordpress.com/bios-recovery/ Unfortunately no luck , with cmos reset , it try to start but then switch it self off after few seconds than start it self automatic and switch it self off again. Any ideas ? Link to comment Share on other sites More sharing options...
mks007 Posted September 5, 2015 Share Posted September 5, 2015 Hmm, we tested cross-flashing SM/SM-A before and the result, while not working properly and having broken keyboard backlights etc, at least didn't brick the system. So there is hope. Please make a CMOS reset (not recovery) and keep the proper files ready on the USB in case it boots up: https://biosmods.wordpress.com/bios-recovery/ unfortunately that didnt help, laptop start for few sec and then switch it self off , and that untill i will take a plug out or press the power button to switch it off ... Any other ideas pleas ????? Link to comment Share on other sites More sharing options...
Guest Posted September 5, 2015 Share Posted September 5, 2015 unfortunately that didnt help, laptop start for few sec and then switch it self off , and that untill i will take a plug out or press the power button to switch it off ... Any other ideas pleas ?????SM-A has different RAM handling. Remove all but a single RAM and try to boot. Link to comment Share on other sites More sharing options...
mks007 Posted September 5, 2015 Share Posted September 5, 2015 SM-A has different RAM handling. Remove all but a single RAM and try to boot. done it and its still not working Link to comment Share on other sites More sharing options...
Guest Posted September 5, 2015 Share Posted September 5, 2015 done it and its still not working Use this file to try the FN+B recovery procedure: https://mega.nz/#!vQsVXRhR!rDCBQ4xsL44pJ0sVX_fdF7-V0EqqQNQjtBQgjgi9wjM Keep all files for the regular proper BIOS update also on the USB in order to flash everything immediately afterwards in case it boots. Link to comment Share on other sites More sharing options...
mks007 Posted September 5, 2015 Share Posted September 5, 2015 Use this file to try the FN+B recovery procedure:https://mega.nz/#!vQsVXRhR!rDCBQ4xsL44pJ0sVX_fdF7-V0EqqQNQjtBQgjgi9wjM Keep all files for the regular proper BIOS update also on the USB in order to flash everything immediately afterwards in case it boots. Thank you for your help Prema , but unfortunatelyits not my day today , i have just lifted my laptop , keyboard was not screw inand it fell out taking with it the piece that was solder in the motherboard. So now im looking for new motherboard for my p177sm model Anybody have any idea where i can buy one for good money? Thank you p.s didnt have that problems with my old w370et laptop for last 2 years Link to comment Share on other sites More sharing options...
TomJGX Posted September 5, 2015 Share Posted September 5, 2015 Thank you for your help Prema , but unfortunatelyits not my day today , i have just lifted my laptop , keyboard was not screw inand it fell out taking with it the piece that was solder in the motherboard.So now im looking for new motherboard for my p177sm model Anybody have any idea where i can buy one for good money? Thank you p.s didnt have that problems with my old w370et laptop for last 2 years Dear me I know the feeling...Where are you located firstly? Sent from my LG-H811 using Tapatalk Link to comment Share on other sites More sharing options...
mks007 Posted September 5, 2015 Share Posted September 5, 2015 dear me i know the feeling...where are you located firstly?Sent from my lg-h811 using tapatalkunited kingdom , cumbria Link to comment Share on other sites More sharing options...
TomJGX Posted September 5, 2015 Share Posted September 5, 2015 united kingdom , cumbriaWhere did you get your laptop from? Was it from a UK reseller like Scan, XMG, PCS Specialist? If you did, ask your reseller first... Otherwise, I'd suggest looking at CEG Extreme... a German reseller... They should be able to sell you a motherboard without making a fuss like the UK resellers.. They're also quite cheap... got my P771ZM from them! Fastest way to contact them is through Facebook message.. search for Clevo Notebooks and it's got a German address and it's them.. Sent from my LG-H811 using Tapatalk Link to comment Share on other sites More sharing options...
mks007 Posted September 5, 2015 Share Posted September 5, 2015 TomJGX said: Where did you get your laptop from? Was it from a UK reseller like Scan, XMG, PCS Specialist? If you did, ask your reseller first... Otherwise, I'd suggest looking at CEG Extreme... a German reseller... They should be able to sell you a motherboard without making a fuss like the UK resellers.. They're also quite cheap... got my P771ZM from them! Fastest way to contact them is through Facebook message.. search for Clevo Notebooks and it's got a German address and it's them.. Sent from my LG-H811 using Tapatalk 1 Link to comment Share on other sites More sharing options...
TomJGX Posted September 5, 2015 Share Posted September 5, 2015 <!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:PunctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> <w:DontGrowAutofit/> </w:Compatibility> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--> Thank you very much for your help <!--[if gte mso 9]><xml> <w:LatentStyles DefLockedState="false" LatentStyleCount="156"> </w:LatentStyles> </xml><![endif]--><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} </style> <![endif]-->Here it is: https://www.facebook.com/CLEVOEXTREMEGAMING?fref=ts 1 Link to comment Share on other sites More sharing options...
d0r1n Posted September 5, 2015 Share Posted September 5, 2015 HELLO.i'm new here and i'm interested to flash the bios and vbios,but ii'm a little sceptic to the wrongs that could happen.i don't see the moded bios advantages than the standard video to compare it to the stock bios and tell the diferences,if u could tell mep.s: i have a p771zm non-gsync Link to comment Share on other sites More sharing options...
d0r1n Posted September 5, 2015 Share Posted September 5, 2015 after the flash of the moded bios can i come back to the stock bios if a black screen happens or a change of heart? Link to comment Share on other sites More sharing options...
andreacos92 Posted September 5, 2015 Share Posted September 5, 2015 after the flash of the moded bios can i come back to the stock bios if a black screen happens or a change of heart?You can re-flash the stock vBios with the same procedure.. just backup your stock vBios with GPU-z or with the command nvflash -b filename.rom Link to comment Share on other sites More sharing options...
Recommended Posts