So I just received a 980m in the post and after installing it I was greeted by multiple system crashes on my Alienware m17xr4 and was unable to install new drivers.
Is there a step in the intallation process I missed? A bios setting I was supposed to change? The laptop is already set to UEFI mode in preperation for this and upon putting the old 680m back in the system it now works again. I have heard that I need to change INI files to install drivers but I expected it to at least function without large bugs such as these. Do you think that this GPU is faulty or have I done something wrong?
Thanks for any help you can give.
hello all, i just got a gtx 980m from a seller on amazon. i have the card installed in my alienware m17x r4, i have updated the bios to A15 stock, in the bios its showing the card is there, in windows 10 the card is also shown in device manager, but it has the code 43 error, i have disabled driver signing and installed a modded driver but its not working, i have uefi legacy mode enabled, i need help getting this working, do i need a modded bios to get the card working? is my card a g-sync version ? any help with this would be great, also if it is a g-sync card, can i vbios flash it with a non g-sync vbios? how can i tell if this card is a clevo or msi ? thanks in advance
Hi Guys, may be someone could give me a good advice...
Alienware m17x R4 with 120hz panel form r3 (LG - LGD02C5)
Bios Dell A15 (Also tried unlocked A11)
Now installed GTX 860m 4gb (Kepler edition) works with no issue
Bought GTX 970 6gb Aetina production Works under MS driver Does not show image on eDP internal screen right after installing Nvidia modded drivers All external ports ( HDMI, eDP VGA) works with no issues - tested on benchmarks the card itself works great The internal screen could blink several times depending on vBios flashed ( so the card is trying to fire it up) Internal screen is not recognized properly - Using Monitor asset manager i observed that: GTX 860 create two monitor entries 1) Realtime and 1) Registry GTX 970m creates two monitor entries 1)Registry and 2) Registry If I change the max Hz using CRU to 100 and Close/Open laptop screen it will show picture in 1024x768 resolution with no possibility to extend and it also see a "Virtual monitor" attached to real one ( extended)
So the main issue is that INTERNAL Display is recognized AS 2 displays 1 connected to the internal laptop port and one into Display port:
vBios tried Premav2, MSI,Dell,Clevo Drivers version tried: 340,350,380,411
I searched for a something related to my issue here and found themes which are really near - but with different problems
i have m18x R1 model with A05 unlocked bios and i try to connect ati mobility 4870 card/s.
I read ton of posts but people that seem to have similar problem with different card didn't post any solution. Case is when i connect 4870 i get black screen and 8 beeps.
When i use only integrated graphics (no cards installed) laptop is starting normally.
When i use integrated graphics (nvidia card installed as master) laptop is starting normally.
When i use nvidia card installed as master laptop is starting normally.
When i use nvidia card installed as master and ati 4870 installed as slave laptop is starting normally but in devices manager i see there is error 10 with ati card.
When i use ati 4870 card installed as master i get 8 beeps and black screen.
I tried to google for answers but unfortunatelly didn't find any. Do you know if that old card can work in m18x ? Maybe it's not supported at all? Do you have any ideas what else can i try?