Binarious Posted January 10, 2018 Share Posted January 10, 2018 I just installed a 1060 mxm card in my Clevo P750DM-G and the laptop recognizes it and installed the The NVIDIA driver says it cannot find compatible hardware and won't install. So far I have used the Display Driver Uninstaller, and also tried to mod the .inf file with: %NVIDIA_DEV.1C20.7502.1558% = Section002, PCI\VEN_10DE&DEV_1C20&SUBSYS_75021558 with the corresponding subsequent string at the bottom of the driver file as well. When I tried to run it with driver signature enforcement disabled it failed. What am I doing wrong? A little help will be appreciated. Thanks Quote Link to comment Share on other sites More sharing options...
runix18 Posted January 10, 2018 Share Posted January 10, 2018 (edited) leave here the complete hardware id of your card from the device manager here, and I will make a moded inf for you. Edited January 10, 2018 by runix18 Quote Link to comment Share on other sites More sharing options...
Binarious Posted January 10, 2018 Author Share Posted January 10, 2018 I appreciate this very much, thank you! Hardware ID: PCI\VEN_10DE&DEV_1C20&SUBSYS_75021558&REV_A1 Device instance path: PCI\VEN_10DE&DEV_1C20&SUBSYS_75021558&REV_A1\4&62B0C4E&0&0008 Quote Link to comment Share on other sites More sharing options...
Binarious Posted January 10, 2018 Author Share Posted January 10, 2018 I believe I modded it correctly, and also disabled driver signature enforcement, but it's saying something about not having permissions. Then when I enabled permissions and got it to run, it said installation failed. It's driving me nuts. I know others have gotten this card to run in this machine, so I know it's possible, but this is driving me nuts. Thank you again for the help! Quote Link to comment Share on other sites More sharing options...
Binarious Posted January 11, 2018 Author Share Posted January 11, 2018 (edited) I got the NVIDIA driver to install, but it only installs the HD Audio portion and not the graphics card part of it. I need this for work and I'm about to put the 980m back in at this point. I'm running Windows 10 I have not yet received help from this. If anyone else knows what I can do to resolve this I will appreciate it greatly. I wasn't expecting these problems and need to get it ready for work asap. Edited January 11, 2018 by Binarious Quote Link to comment Share on other sites More sharing options...
runix18 Posted January 11, 2018 Share Posted January 11, 2018 7 hours ago, Binarious said: I got the NVIDIA driver to install, but it only installs the HD Audio portion and not the graphics card part of it. I need this for work and I'm about to put the 980m back in at this point. I'm running Windows 10 I have not yet received help from this. If anyone else knows what I can do to resolve this I will appreciate it greatly. I wasn't expecting these problems and need to get it ready for work asap. u got PM Quote Link to comment Share on other sites More sharing options...
Binarious Posted January 11, 2018 Author Share Posted January 11, 2018 It worked, you're awesome! I would love to know exactly what you did to get it to work right. My 3DMk11 graphic score went up 13% from: 12335 with an overclocked 980m to 14558 with this stock 1060. The only thing that's weird is that 3DMark11 shows "generic VGA" for the graphics card. As long as it's working properly, it's not a huge deal, but it's a curiosity. Any idea why it's like this? Thank you again! Quote Link to comment Share on other sites More sharing options...
runix18 Posted January 11, 2018 Share Posted January 11, 2018 (edited) 16 hours ago, Binarious said: It worked, you're awesome! I would love to know exactly what you did to get it to work right. My 3DMk11 graphic score went up 13% from: 12335 with an overclocked 980m to 14558 with this stock 1060. The only thing that's weird is that 3DMark11 shows "generic VGA" for the graphics card. As long as it's working properly, it's not a huge deal, but it's a curiosity. Any idea why it's like this? Thank you again! Duuno exactly why this happens, happened to me aswell when I had the alienware mx17 r4 and up from the gtx 675 to gtx 780 And btw, for future driver updates, for the moded inf to work, you need to replace 7504 (from your hardware id) with 7502 (or any other string that points out to a 1060), but you need to replace all values of 7504 (or whatever) with 7502 (not only the bottom bit), the command in notebook beeing CTRL+H (replace all values with) Hopped it hellped. Edited January 12, 2018 by runix18 Quote Link to comment Share on other sites More sharing options...
Raymond.p Posted October 3, 2021 Share Posted October 3, 2021 (edited) On 1/11/2018 at 7:03 PM, runix18 said: u got PM hi sir. ive just recently bought a clevo p750dmg with gtx965m. i had extra gtx 1060 mxm3.0b gpu. but i couldnt install it. can you also help me how to properly install my 1060? thank you... Edited October 3, 2021 by Raymond.p Quote Link to comment Share on other sites More sharing options...
runix18 Posted October 14, 2021 Share Posted October 14, 2021 On 10/3/2021 at 6:47 PM, Raymond.p said: hi sir. ive just recently bought a clevo p750dmg with gtx965m. i had extra gtx 1060 mxm3.0b gpu. but i couldnt install it. can you also help me how to properly install my 1060? thank you... Pls tell me the HW Id of the card so I can mod an inf Quote Link to comment Share on other sites More sharing options...
Raymond.p Posted November 12, 2021 Share Posted November 12, 2021 On 10/14/2021 at 5:28 PM, runix18 said: Pls tell me the HW Id of the card so I can mod an inf good day sir... sorry for late response because i've forgot my password to log in here... i've temporary install my 1060 on my p177sma to see the id,if i install the card on my p750dmg it wont boot. here is my hw id PCI\VEN_10DE&DEV_1C20&SUBSYS_74811558&REV_A1 PCI\VEN_10DE&DEV_1C20&SUBSYS_74811558 PCI\VEN_10DE&DEV_1C20&CC_030000 PCI\VEN_10DE&DEV_1C20&CC_0300 Thank you sir in advance. by the way,my 1060 came from asrock deskmini z370 gtx1060 ver... Quote Link to comment Share on other sites More sharing options...
runix18 Posted November 13, 2021 Share Posted November 13, 2021 Here you are https://www.mediafire.com/file/ollxso8i9fzmcjx/nvcvi.inf/file 1. make sure test mode is enabled in windows. 2. Replace this in Display.Driver folder. Version 496.49 3. Run setup as normal. Quote Link to comment Share on other sites More sharing options...
Raymond.p Posted November 14, 2021 Share Posted November 14, 2021 14 hours ago, runix18 said: Here you are https://www.mediafire.com/file/ollxso8i9fzmcjx/nvcvi.inf/file 1. make sure test mode is enabled in windows. 2. Replace this in Display.Driver folder. Version 496.49 3. Run setup as normal. Thank you very much sir... I will inform you as soon as i got installed my card in my p750dmg... Quote Link to comment Share on other sites More sharing options...
Raymond.p Posted November 14, 2021 Share Posted November 14, 2021 18 hours ago, runix18 said: Here you are https://www.mediafire.com/file/ollxso8i9fzmcjx/nvcvi.inf/file 1. make sure test mode is enabled in windows. 2. Replace this in Display.Driver folder. Version 496.49 3. Run setup as normal. good day sir. the HW id i've gaved to you was from P177sma. im sorry. i've change the vbios of my card so it can boot in my P750dmg.. heres my hw id PCI\VEN_10DE&DEV_1C20&SUBSYS_75021558&REV_A1 PCI\VEN_10DE&DEV_1C20&SUBSYS_75021558 PCI\VEN_10DE&DEV_1C20&CC_030000 PCI\VEN_10DE&DEV_1C20&CC_0300 device instance path PCI\VEN_10DE&DEV_1C20&SUBSYS_75021558&REV_A1\4&62B0C4E&0&0008 Quote Link to comment Share on other sites More sharing options...
runix18 Posted November 16, 2021 Share Posted November 16, 2021 Here you are https://www.mediafire.com/file/yr1ebnhhjgx30k9/nvcvi.inf/file Quote Link to comment Share on other sites More sharing options...
Raymond.p Posted November 17, 2021 Share Posted November 17, 2021 (edited) On 11/16/2021 at 9:47 PM, runix18 said: Here you are https://www.mediafire.com/file/yr1ebnhhjgx30k9/nvcvi.inf/file I cant upload images here... After i've install the driver the screen got some static and lines... But anyway,thank you sir Edited November 17, 2021 by Raymond.p Wrong type Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.