Jump to content

Looking to part out a P157SM


MC-Sammer

Recommended Posts

I could've sworn there was a selling section on TI, but I can't seem to find it.

 

Anyway, I'm parting out my old P157SM since I've upgraded to a P750DM2-G.

 

I've already sold the GPU, but the rest of the parts (minus the CPU and bottom case cover) are in decent shape and I was wondering if folks would either be interested in buying any parts (much cheaper than getting them from rjtech) and/or had recommendations on where to post them.

 

I've already posted them on eBay without much fanfare (links below) but if anyone has any tips I would be very grateful!

 

https://www.ebay.com/itm/Laptop-Keyboard-and-speaker-cover-For-Clevo-P157SM/272870402908

https://www.ebay.com/itm/Killer-Wireless-N-1103-NIC-Clevo/272870395346

https://www.ebay.com/itm/New-Clevo-P157SM-P157SM-A-P170EM-GPU-fan/272870382942

https://www.ebay.com/itm/Used-for-Clevo-P151EM1-P157SM-P157SM-A-P170HM-P170HM3-CPU-Cooling-Fan/272870380925

 

Thanks everyone!

 

Link to comment
Share on other sites

Do you still have the battery and optical drive caddy? I picked up a P157SM-A frame and have everything but those. The battery doesn't need to work. I just need the shell. As for the optical drive all I really need is the bezel, but the fully caddy would be nice to secure the SSD.

Link to comment
Share on other sites

6 hours ago, Khenglish said:

Do you still have the battery and optical drive caddy? I picked up a P157SM-A frame and have everything but those. The battery doesn't need to work. I just need the shell. As for the optical drive all I really need is the bezel, but the fully caddy would be nice to secure the SSD.

I do have the battery, and you're in luck because it holds about a 3 minute charge lol

 

And yup I have the OD caddy; the GPU + Heatsink + Screws are the only parts I've sold so far.

Link to comment
Share on other sites

3 hours ago, Khenglish said:

If you put them up on ebay I will 100% buy them if they're cheap enough.

Also this is the link to TI's page if you want to use that:

 

https://www.techinferno.com/index.php?/classifieds/category/2-notebooks-and-components/

 

When you say OD caddy are you talking about the housing of the optical drive itself, or that little HDD/SSD drive caddy for housing a drive above/behind the OD?

Link to comment
Share on other sites

 

2 hours ago, MC-Sammer said:

 

When you say OD caddy are you talking about the housing of the optical drive itself, or that little HDD/SSD drive caddy for housing a drive above/behind the OD?

 

Yeah the HDD/SSD drive caddy would be good to have and I see you listed it. Mainly I want the optical drive bezel. The P150EM bezel does not match at all.

 

The bracket for the single screw to hold the drive in would be helpful as well, although I could make that out of copper flashing.

 

And hell, my optical drive is getting flaky, so the whole optical drive would be nice if you're willing to part with it, especially if it can read blu-ray.

 

idk if you want to relist the caddy with the other parts included or just make another listing, so I've held off buying it for now.

Link to comment
Share on other sites

9 minutes ago, Khenglish said:

 

 

Yeah the HDD/SSD drive caddy would be good to have and I see you listed it. Mainly I want the optical drive bezel. The P150EM bezel does not match at all.

 

The bracket for the single screw to hold the drive in would be helpful as well, although I could make that out of copper flashing.

 

And hell, my optical drive is getting flaky, so the whole optical drive would be nice if you're willing to part with it, especially if it can read blu-ray.

 

idk if you want to relist the caddy with the other parts included or just make another listing, so I've held off buying it for now.

 

I don't have anything else I can put the drive in, and finding a ODD external caddy is a pain, so here ya go!

 

https://www.ebay.com/itm/272956363346

 

I also posted the screen if you're interested. 95% color gamut and it calibrated pretty nicely :)

Link to comment
Share on other sites

$70 for the drive is a bit steep for me, so I'm thinking of bidding instead of buyout unless you want to relist. I'd probably never burn a blu-ray, and there are "new" (old but unused) 12.7mm burners on ebay for less. I have had 2 optical drives die so use definitely matters.

Link to comment
Share on other sites

  • 11 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.