MC-Sammer Posted November 25, 2017 Share Posted November 25, 2017 I could've sworn there was a selling section on TI, but I can't seem to find it. Anyway, I'm parting out my old P157SM since I've upgraded to a P750DM2-G. I've already sold the GPU, but the rest of the parts (minus the CPU and bottom case cover) are in decent shape and I was wondering if folks would either be interested in buying any parts (much cheaper than getting them from rjtech) and/or had recommendations on where to post them. I've already posted them on eBay without much fanfare (links below) but if anyone has any tips I would be very grateful! https://www.ebay.com/itm/Laptop-Keyboard-and-speaker-cover-For-Clevo-P157SM/272870402908 https://www.ebay.com/itm/Killer-Wireless-N-1103-NIC-Clevo/272870395346 https://www.ebay.com/itm/New-Clevo-P157SM-P157SM-A-P170EM-GPU-fan/272870382942 https://www.ebay.com/itm/Used-for-Clevo-P151EM1-P157SM-P157SM-A-P170HM-P170HM3-CPU-Cooling-Fan/272870380925 Thanks everyone! Quote Link to comment Share on other sites More sharing options...
Khenglish Posted November 26, 2017 Share Posted November 26, 2017 Do you still have the battery and optical drive caddy? I picked up a P157SM-A frame and have everything but those. The battery doesn't need to work. I just need the shell. As for the optical drive all I really need is the bezel, but the fully caddy would be nice to secure the SSD. Quote Link to comment Share on other sites More sharing options...
MC-Sammer Posted November 26, 2017 Author Share Posted November 26, 2017 6 hours ago, Khenglish said: Do you still have the battery and optical drive caddy? I picked up a P157SM-A frame and have everything but those. The battery doesn't need to work. I just need the shell. As for the optical drive all I really need is the bezel, but the fully caddy would be nice to secure the SSD. I do have the battery, and you're in luck because it holds about a 3 minute charge lol And yup I have the OD caddy; the GPU + Heatsink + Screws are the only parts I've sold so far. Quote Link to comment Share on other sites More sharing options...
Khenglish Posted November 26, 2017 Share Posted November 26, 2017 If you put them up on ebay I will 100% buy them if they're cheap enough. Also this is the link to TI's page if you want to use that: https://www.techinferno.com/index.php?/classifieds/category/2-notebooks-and-components/ Quote Link to comment Share on other sites More sharing options...
MC-Sammer Posted November 26, 2017 Author Share Posted November 26, 2017 Well the drive I have is a blu-ray writer, would you be interested in buying the full drive? Quote Link to comment Share on other sites More sharing options...
MC-Sammer Posted November 26, 2017 Author Share Posted November 26, 2017 3 hours ago, Khenglish said: If you put them up on ebay I will 100% buy them if they're cheap enough. Also this is the link to TI's page if you want to use that: https://www.techinferno.com/index.php?/classifieds/category/2-notebooks-and-components/ When you say OD caddy are you talking about the housing of the optical drive itself, or that little HDD/SSD drive caddy for housing a drive above/behind the OD? Quote Link to comment Share on other sites More sharing options...
MC-Sammer Posted November 26, 2017 Author Share Posted November 26, 2017 (edited) *cough* https://www.ebay.com/itm/272956173817?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649 *cough* http://www.ebay.com/itm/272956220895?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649 *cough* Edited November 26, 2017 by MC-Sammer added link Quote Link to comment Share on other sites More sharing options...
Khenglish Posted November 26, 2017 Share Posted November 26, 2017 2 hours ago, MC-Sammer said: When you say OD caddy are you talking about the housing of the optical drive itself, or that little HDD/SSD drive caddy for housing a drive above/behind the OD? Yeah the HDD/SSD drive caddy would be good to have and I see you listed it. Mainly I want the optical drive bezel. The P150EM bezel does not match at all. The bracket for the single screw to hold the drive in would be helpful as well, although I could make that out of copper flashing. And hell, my optical drive is getting flaky, so the whole optical drive would be nice if you're willing to part with it, especially if it can read blu-ray. idk if you want to relist the caddy with the other parts included or just make another listing, so I've held off buying it for now. Quote Link to comment Share on other sites More sharing options...
MC-Sammer Posted November 26, 2017 Author Share Posted November 26, 2017 9 minutes ago, Khenglish said: Yeah the HDD/SSD drive caddy would be good to have and I see you listed it. Mainly I want the optical drive bezel. The P150EM bezel does not match at all. The bracket for the single screw to hold the drive in would be helpful as well, although I could make that out of copper flashing. And hell, my optical drive is getting flaky, so the whole optical drive would be nice if you're willing to part with it, especially if it can read blu-ray. idk if you want to relist the caddy with the other parts included or just make another listing, so I've held off buying it for now. I don't have anything else I can put the drive in, and finding a ODD external caddy is a pain, so here ya go! https://www.ebay.com/itm/272956363346 I also posted the screen if you're interested. 95% color gamut and it calibrated pretty nicely Quote Link to comment Share on other sites More sharing options...
Khenglish Posted November 27, 2017 Share Posted November 27, 2017 $70 for the drive is a bit steep for me, so I'm thinking of bidding instead of buyout unless you want to relist. I'd probably never burn a blu-ray, and there are "new" (old but unused) 12.7mm burners on ebay for less. I have had 2 optical drives die so use definitely matters. Quote Link to comment Share on other sites More sharing options...
MC-Sammer Posted November 27, 2017 Author Share Posted November 27, 2017 I lowered it to $45 ($50 with shipping). Quote Link to comment Share on other sites More sharing options...
Khenglish Posted November 27, 2017 Share Posted November 27, 2017 3 minutes ago, MC-Sammer said: I lowered it to $45 ($50 with shipping). Awesome, my "new" laptop will now no longer have missing pieces. Quote Link to comment Share on other sites More sharing options...
Buratos Posted November 20, 2018 Share Posted November 20, 2018 Hi guys! Can the guys give vbios 8970m from 157sm? working at 150EM? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.