Hello, as the title states, I would be very happy if someone could give me the link to the mod, apart from that, what version should I install?, as I've seen that some models have v1 and v2.
My other questions are: what do I have to do to install a new GPU?, (9xx series)
And what mods do I have to use to have a 10x0 series (and which are compatible).
I have the Clevo P150SM(model)/P150SM-A(product code) (2 models on the sticker) with stock bios (it says copyright 2012, so I guess it's the 1st version) with a 4710MQ and 870M.
I would be very pleased if someone could hand me the link.
Many thanks in advance.
I need remove WIFI whitelist from Lenovo Thinkpad Edge E431 laptop.
bios version is HEET52WW
Is it possible to remove whitelist on this bios version?
UEFI BIOS Version: GJETA4WW (2.54)
UEFI BIOS Date (Year-Month-Day): 2020-03-37
ME Firmware Version: 184.108.40.2062
Embedded Controller Version: GJHT30WW (1.14)
I need Battery Authentication whitelist Removal because my laptop showing "the battery installed is not supported."
Result.rar & .rom file: https://www.mediafire.com/file/byxsoqpg4j3od25/result_rar_and_rom_file.zip/file
I've been searching all over the internet and these forums in particular and I just can't seem to get any answers regarding GPU upgrades for the Clevo P150HM. Neither can I get any real info on the difference between the HM and the EM model - the EM seems to be the much more talked about model.
Anyway, my current GTX 580M is causing a black screen very occasionally and I decided to purchase a used GTX 980M (N16E-GX-A1) from aliexpress as a replacement.
The seller isn't giving me much information and I am unsure if they've flashed the vbios on this card themselves, regardless of that I cannot seem to find a custom BIOS for this laptop either, the closest I found is P150EM_17_11_PM_v2 which is obviously for a EM not a HM model, again I don't know much about these two models and if attempting a flash with that BIOS will brick my laptop.
The 980M is the correct form factor, it fits in perfectly and even warms up when I turn the laptop on, I can see the POST screen display but then it simply maxes the fans and beeps out until it shuts down. It would seem to be a pretty clear indication of incompatibility.
Model: Clevo P150HM
MB Series: P150HMx
BIOS Revision: 1.01.14
KBC/EC Firmware Revision: 1.00.12
Another version number listed (not sure for what): 2.10.1208
I understand this is both an old subject and an even older laptop, but I would be extremely thankful for any help available and I am willing to drill down to create my own custom BIOS if necessary but I just need a point in the right direction.
Failing all that, its not the end of the world as they've already agreed to a return and refund if I can't figure this out.