By Lisa Scott
Sometimes, our Computer becomes very slow and gives tough time to make work on it. This makes slow because of hard drive holding the plenty of data, files. So, to make faster speed clear the some space.
Some background applications or programs running make computer slow.
Remove or disable any TSRs and startup programs that automatically start each time the computer boots.
Scan for Malware and Adware, if your system infected by them.
Uninstall Programs You Don’t Use
Table of contents
Unboxing Features & Flexibility One Size Does Not Fit All Thoughts & Verdict
PC gamers are a picky bunch and are usually very meticulous about what type of equipment they purchase for their battlestations. One of the most important items for long term play and comfort is the gaming chair you will be sitting on for many hours. Comfort is a large factor and when choosing from what type of chair to get, the choices can be inundating. In particular, gamer chairs are a recent phenomenon that really took off with DX Racer and now there are a variety of choices to pick from on the market. In this article, we will be going over the Champion Series Gaming Chair by E-Win which offers a number of features that may be suited to even the most discerning gamer.
Unboxing & Assembly
Every gamer loves the joy of unboxing any new item they get for their setup and so do we. So to kick things off with this review, here is our quick and dirty unboxing video for those of you that love that sorta thing as much as we do.
Assembly is pretty straightforward and if you've ever assembled any office chair in the past, it should easily be a 10-15 minute job at most. In fact, of all the recent office chairs I've built, this one is probably the easiest of them all because a lot of it was already preassembled in the box. Typically, when you buy an office chair, you have to attach the armrests to the seat or metal base but E-Win took care of that by having the arm rests and side cover already attached to the seat.
However, it's worth mentioning that I did have to loosen the 8 arm rest screws (4 each) to get the metal base to attach to the seat since the armrests by default were in too far but that didn't take more than an extra minute or two to do.
Features & Flexibility
I think what separates gaming chairs like this from your typical office chair you can buy at places like Staples is the amount of flexibility it offers. For example, the armrests in this chair are marketed as "4D" because they allow full range 4D movement. The armrest can swivel left/right, up/down and front/back which is something I've never seen before I got this chair. One thing I really like about this chair is the handle for adjusting the backrest is just like the one you'd find in a typical car so it feels very natural. Whenever you want to kick back and take a nap or relax and watch a movie, this chairs backrest can adjust from 85 degrees to 155 degrees so it provides a huge range of movement you can choose from and also has a tilt locking mechanism to keep it where you want it.
You can see an example of the aforementioned features in the following video:
The Champion Series chair also has adjustable height of approximately 4 inches (15-18.9 inches) which for me was perfect because the last chair I used didn't sit high enough for me to keep my arms level with my desk. This resulted in pretty bad wrist cramps during long gaming sessions which fortunately this chair helped fix.
Finally, it also has your typical tilt tension screw at the bottom of the chair which I honestly never change but I'm sure others do and appreciate the granular adjustments.
One Size Does Not Fit All
The E-Win Champion Series chair measures 21.3 in/54 cm wide at the base while the back rest is 20.5 in/52 cm. The hand rests are adjustable from 11.8 in to 14 in/30~36 cm and are 3.9 in/10 cm wide. The total length from the base to the top of the back rest measures 37.8 in/96 cm.
The reason I mentioned all these measurements is because I have often heard gamers complain about their new gaming chair on Reddit and elsewhere and usually the fault isn't in the chair itself but rather the person didn't take into account the size of the chair relative to their own body. Fortunately, E-Win offers a variety of gaming chairs to choose from that suit virtually any body type. In my case in particular, I am 6'2" and weigh approximately 215 lbs so when my contact at E-Win asked me for my height and weight, she specifically chose this chair that would suit my build and as a result, it fits like a glove.
So How Is It?
Well in a nutshell: It's fantastic and my primary gaming chair now, 'nuff said. It did take me a few days to break in as initially the seat felt a bit tight around the edges but after a few days of use, it broke in and now I've got it set just how I want for my long Apex Legends gaming sessions. One of the things I always complained about my previous mesh chair to my buddies on discord was that I couldn't quite adjust it high enough to keep my arms level with my desk. As a result, I would get really bad wrist cramps after an hour or two of gaming and my back would start aching. The Champion Series chair fortunately is a large chair and consequently can be adjusted high enough to even be above the level of my desk so I was able to adjust it to perfectly match my desks height and keep my arms level. I cannot stress how important this is for long term gaming as it can prevent repetitive strain injury and this chair fortunately helps with that.
Overall I'm very pleased with this chair and I think you will be too, take it from one gamer to another. Just remember to pick the chair that fits your body size so you don't run into any problems. If you'd like to purchase this chair, please visit E-Win's website and use code "TechInferno" when checking out. As of the publishing of this article, E-Win has a 30% off black friday sale so get it while you can!
View full article
So on occasion I host gaming nights over at my house, and usually end up hooking my laptop up to a big TV so me and a couple friends can all play all kinds of multiplayer games (either emulated or off of steam).
But I was recently thinking that it would be fun to get a projector set up, so that we could play on a huge blank wall in my living room.
With that being said: I'm new to purchasing projectors, so I'm not familiar with what kinds of features/specifications I should be looking for (and I'd like to keep the cost down if it's possible).
So I was wondering if anyone has any advice for me on what to look for in features/specifications, affordable places to buy from, or just general info on what I'm trying to do.
Any help would be super appreciated!
I'm debating whether or not to replace the thermal paste in my Lenovo y510p. I've started overclocking a bit, and I have an external fan, but I would like to not have to run the fan as fast because it is a little loud. I have been reading a bit about different thermal pastes, and I'm wondering if there is even a big difference between stock thermal paste, and something like the liquid metal from thermal grizzly. It sounds like it'd work better, but I don't want to fall for a good marketing scheme. If anyone has experience with this and has or hasn't seen big differences, your input would be greatly appreciated.
Thanks in advance!