wormboy Posted June 23, 2015 Share Posted June 23, 2015 There have been several Dell owner's linked from http://forum.techinferno.com/diy-e-gpu-projects/6578-implementations-hub-tb-ec-mpcie.html#dx11 that are using Setup 1.30 for various functions: resolve error 12 using PCIe compaction, disable dGPU, provide a diagnostic interface for eGPU detection, switch ports from Gen1<->Gen2, provide mPCIe whitelisting. Details of how to acquire the software are posted on the first post of this thread.erm...i dont know about Port Gen1 - Gen2 ..im still new~.and i dint see my laptop version in the Implementations Hub: TB, EC, mPCIe list...... btw...what about 2.0? i got egpu Beast model. Link to comment Share on other sites More sharing options...
Tech Inferno Fan Posted June 24, 2015 Share Posted June 24, 2015 erm...i dont know about Port Gen1 - Gen2 ..im still new~.and i dint see my laptop version in the Implementations Hub: TB, EC, mPCIe list...... btw...what about 2.0? i got egpu Beast model.Gen2 is PCie 2.0. Gen1 is PCIe 1.1. The difference is the former gives twice the bandwidth. Your system is Gen2 capable but if the BIOS isn't setting the mPCIe port to Gen2 then you can use Setup 1.30 to do it. Link to comment Share on other sites More sharing options...
Eightarmedpet Posted June 24, 2015 Share Posted June 24, 2015 Possible stupid question, but I am new to anything tech, will this 1.3 set up work for a 2012 rmbp and 64 bit windows installed via regular bootcamp. Sorry, very new to this... Link to comment Share on other sites More sharing options...
DatScream Posted June 25, 2015 Share Posted June 25, 2015 What does iGPU, dGPU means? Link to comment Share on other sites More sharing options...
devilkx Posted June 25, 2015 Share Posted June 25, 2015 So all this time for a rebardged GPU , damn amd.... Link to comment Share on other sites More sharing options...
devilkx Posted June 25, 2015 Share Posted June 25, 2015 eGPU Kit is very expensive... but it's a very good way to play hard games on laptops. and also if you want to change it, you keep the eGPU kit lol- - - Updated - - -there is a cheap one in banggood , google it . its only 50 bucks Link to comment Share on other sites More sharing options...
devilkx Posted June 25, 2015 Share Posted June 25, 2015 a friend of mine has the same problem too damn .. Link to comment Share on other sites More sharing options...
devilkx Posted June 25, 2015 Share Posted June 25, 2015 wow amazing, can you take a photo of your setup please Link to comment Share on other sites More sharing options...
devilkx Posted June 25, 2015 Share Posted June 25, 2015 What is PE4C ? Link to comment Share on other sites More sharing options...
devilkx Posted June 25, 2015 Share Posted June 25, 2015 youtube... Link to comment Share on other sites More sharing options...
Tanus Posted June 27, 2015 Share Posted June 27, 2015 i cant either Link to comment Share on other sites More sharing options...
Tanus Posted June 27, 2015 Share Posted June 27, 2015 omgg Link to comment Share on other sites More sharing options...
Tanus Posted June 27, 2015 Share Posted June 27, 2015 ex psu ?- - - Updated - - -wrong msg sorry Link to comment Share on other sites More sharing options...
Tanus Posted June 27, 2015 Share Posted June 27, 2015 wierd setup u have there Link to comment Share on other sites More sharing options...
Tanus Posted June 27, 2015 Share Posted June 27, 2015 thnaks for guide Link to comment Share on other sites More sharing options...
OeffOeff Posted June 27, 2015 Share Posted June 27, 2015 // delete this post Link to comment Share on other sites More sharing options...
gendouhydeist Posted June 28, 2015 Share Posted June 28, 2015 Hi guys any solution when my OS doesn't load whenever I chainload my OS after setup?My procedure was first Hot reset my eGPU then compact to 36bit (iGPU, dGPU,eGPU) after that I enable Gen2 Port for optimus then disable my dGPU recompact again this time only iGPU and eGPU, run test, then chainload boot on MBR (tried bootmgr also it doesn't work).My GDC also was always on red LED even I reset it.My SetupGDC EXP BEAST v6 (using mPCIe)14" ASUS X450JiGPU Intel HD 4600dGPU NVIDIA GT 745MeGPU Asus STRIX 970M Link to comment Share on other sites More sharing options...
Tech Inferno Fan Posted June 28, 2015 Share Posted June 28, 2015 Hi guys any solution when my OS doesn't load whenever I chainload my OS after setup?My procedure was first Hot reset my eGPU then compact to 36bit (iGPU, dGPU,eGPU) after that I enable Gen2 Port for optimus then disable my dGPU recompact again this time only iGPU and eGPU, run test, then chainload boot on MBR (tried bootmgr also it doesn't work).My GDC also was always on red LED even I reset it.My SetupGDC EXP BEAST v6 (using mPCIe)14" ASUS X450JiGPU Intel HD 4600dGPU NVIDIA GT 745MeGPU Asus STRIX 970M1. Confirm Chainloading works before making any PCIe config space changes:Set Chainloader.mode=MBR, Chainloader->Test Run.2. Then perform the steps you require. From your post you'd need:(i) PCIe Ports ->Hot Reset. Hit F3 to add to your startup.bat(ii) Set PCI Compaction->ignore [dGPU](iii) Perform a 32-bit PCI compaction (highlight PCI compaction->Run compact, hit F1 for a list of ones to try)(iv) Video cards->dGPU[off](v) Startup.bat->Test Run(vi) Chainloader->Test RunAdvise DO NOT set Gen2 until after you've got a confirmed GPU working. That's because EXP GDC Beast has had flakey Gen2 reliability.If need further help with this, please email me. Link to comment Share on other sites More sharing options...
DatScream Posted June 29, 2015 Share Posted June 29, 2015 Do we need setup 1.x? Link to comment Share on other sites More sharing options...
mrwater Posted June 29, 2015 Share Posted June 29, 2015 Looks good! unfortunately my Y500 doesn't have an ExpressCard slot, right now I'm searching for a method to use the Ultrabay slot, and if that doesn't work I'll try to use the mPcie slot. Link to comment Share on other sites More sharing options...
Lee James Wood Posted June 29, 2015 Share Posted June 29, 2015 I have a guy buying a 980M from me, for a M6800. Impressive that there is a easy to find sticky/post already made. Good work! Link to comment Share on other sites More sharing options...
Tech Inferno Fan Posted June 30, 2015 Share Posted June 30, 2015 @Duck, please share some pictures of your rig, 3dmark11/13 benchmarks and the installation steps to get it all going. Those will help other users with the same notebook leverage off your pioneering work to do the same. Link to comment Share on other sites More sharing options...
Donnyten Posted June 30, 2015 Share Posted June 30, 2015 Anyone? Link to comment Share on other sites More sharing options...
Duck Posted June 30, 2015 Share Posted June 30, 2015 @Tech Inferno Fan Alright, here is a benchmark result: NVIDIA GeForce GTX 750 Ti video card benchmark result - Intel Core i7-3537U,Dell Inc. 0C46Y8 And also the unigine result! http://i.imgur.com/RjJi82r.jpg And GTA V runs at about 40-50 fps at the lowest settings. Close up of the setup Long shot of the setup. Rest of the pics!! https://drive.google.com/file/d/0BxAq468fYAOGZVNSWEN2ZlVxUHc/view?usp=sharing https://drive.google.com/file/d/0BxAq468fYAOGSDRHb0hwYjlZRFE/view?usp=sharing https://drive.google.com/file/d/0BxAq468fYAOGcWQ5d1JRSUlneUk/view?usp=sharing https://drive.google.com/file/d/0BxAq468fYAOGRXJIYWx6WVpBbk0/view?usp=sharing https://drive.google.com/file/d/0BxAq468fYAOGaEhhWnFMY3BWd3c/view?usp=sharing https://drive.google.com/file/d/0BxAq468fYAOGNnUzMVF1OTZ5NmM/view?usp=sharing Link to comment Share on other sites More sharing options...
gluglok Posted July 1, 2015 Share Posted July 1, 2015 Hello. I have sent $25 to nando and I'm trying to to get setup 1.30 delivered. How do I go about doing that? Link to comment Share on other sites More sharing options...
Recommended Posts