Dimovey Posted June 15, 2015 Share Posted June 15, 2015 @Tech Inferno FanCan you pls check your mailbox? I sent you 2 emails to Tech Inferno [email protected] regarding the topic. Link to comment Share on other sites More sharing options...
Tech Inferno Fan Posted June 15, 2015 Share Posted June 15, 2015 That's a great find! I had emailed this vendor on Friday inquiring about super low profile cables. They seem to be very in tune with our projects and are willing to custom make anything we need (I inquired about a splitter cable with low profile connectors). This is exciting stuff for those that don't want to fabricate their own cables!Well, the picture with 'shortage' in it is jacobsson's pic from the opening post at http://forum.techinferno.com/enclosures-adapters/9426-220w-dell-da-2-ac-adapter-discussion.html#post102834 . Strange that this ebay advert makes no mention of a Dell DA-2 when clearly the 8-pin connector has been designed to attach to one.Akitio Egpu 8 Pin to 2 x PCI E 6 Pin Male and 1 x ID 2 5mm OD 5 5mm Barrel | eBayIt's almost like a stealth advertising product designed only for AKiTiO eGPU users attaching with a 220W Dell DA-2. Very good price for a ready-to-go cable. It also has the GND pin wired through such that when you attach the Dell DA-2, it powers on. Link to comment Share on other sites More sharing options...
Tech Inferno Fan Posted June 16, 2015 Share Posted June 16, 2015 More pictures as requested. Sorry for the late response.Would you mind explaining that secondary board you have directly wired to the PCIe slot. Knowing you were doing x2 2.0, it looks like you've got some priority wiring for the second lane? Can you advise then what users who predominantly would like a x1 2.0 (or x1 1.1) link would need to do here?Post mainly to eliminate any confusion . . . 1 Link to comment Share on other sites More sharing options...
timohour Posted June 16, 2015 Share Posted June 16, 2015 Would you mind explaining that secondary board you have directly wired to the PCIe slot. Knowing you were doing x2 2.0, it looks like you've got some priority wiring for the second lane? Can you advise then what users who predominantly would like a x1 2.0 (or x1 1.1) link would need to do here?Post mainly to eliminate any confusion . . .To avoid any misunderstanding the last image on the Album is for another project regarding x2 2.0 configuration.. I am deleting it so no one gets confused...Thanks @Tech Inferno Fan for the heads up! 1 Link to comment Share on other sites More sharing options...
ezalore Posted June 18, 2015 Share Posted June 18, 2015 You can remove my post i'm sorry Link to comment Share on other sites More sharing options...
kayacan93 Posted June 18, 2015 Share Posted June 18, 2015 Hi Guys,I have problem with playing "Euro Truck Simulator 2". In this game i am getting very low performance. I tried low graphic settings and high settings but there is not any difference between these settings. Also i am playing more powerfull games like "Witcher 3" and "GTA 5" but i have not any problem in these game. Do you have any idea about it?i7 3630qm processor8GB 1600 mhz ramGalax GTX 960 EX OCEXP GDC Beast Link to comment Share on other sites More sharing options...
isynapse93 Posted June 18, 2015 Share Posted June 18, 2015 Most interesting! Is an awesome thing! Link to comment Share on other sites More sharing options...
isynapse93 Posted June 18, 2015 Share Posted June 18, 2015 Is possible Link to comment Share on other sites More sharing options...
isynapse93 Posted June 18, 2015 Share Posted June 18, 2015 Most interesting! Is an awesome thing! Link to comment Share on other sites More sharing options...
isynapse93 Posted June 18, 2015 Share Posted June 18, 2015 Most interesting! Is an awesome thing! Link to comment Share on other sites More sharing options...
isynapse93 Posted June 18, 2015 Share Posted June 18, 2015 Most interesting! Is an awesome thing! Link to comment Share on other sites More sharing options...
hydrocell Posted June 19, 2015 Share Posted June 19, 2015 hi. just need to confirm if 1.30 will remove whitelisting of lenovo y410p? Planning on purchasing this software since I just got my PE4C dock and mount a 970 on it. I dont want to apply any bios mod since i have version 3.07 which I think doesnt have a mod yet. thank you Link to comment Share on other sites More sharing options...
Tech Inferno Fan Posted June 19, 2015 Share Posted June 19, 2015 hi. just need to confirm if 1.30 will remove whitelisting of lenovo y410p? Planning on purchasing this software since I just got my PE4C dock and mount a 970 on it. I dont want to apply any bios mod since i have version 3.07 which I think doesnt have a mod yet. thank youTested with HP Elitebook systems. Never had a Lenovo to test with though there are some Lenovo owners using Setup 1.30 listed at http://forum.techinferno.com/diy-e-gpu-projects/6578-implementations-hub-tb-ec-mpcie.html#dx11 . Though that could be for any number of other reasons (Gen1/2 switching, dGPU disabling, PCI compaction for error 12). Link to comment Share on other sites More sharing options...
ezalore Posted June 19, 2015 Share Posted June 19, 2015 hello, i have an Asus K73SV-i7 2670QM 2.2Ghz -8GB of RAM -Intel HD Graphics3000 + Nvidia GeForceGT540M -Windows 8.1 Prox64 eGPU: Exp gdc Beast v6 750W power supply GTX 980 MSI Gaming For the connections look at the picture : So i want to use my GTX 980 but there are many problems -I tried with de mpcie plugged in before boot but i had a blue screen, windows can't boot. Edit : (ACPI BIOS ERROR) -I tried with de mpcie plugged in after boot, while windows is running but the laptop freezed -I tried to put the laptop in standby, plugged in and switch on, no problems, the eGPU fans accelerate but stop after some seconds and the eGPU isn't detected. I don't know what to do if someone can help me please ? Thank you guys i'm waitting for you (PS : sorry for my english, i'm french ) Help ?? Link to comment Share on other sites More sharing options...
rOjterSWE Posted June 20, 2015 Share Posted June 20, 2015 Nice one, ty! Link to comment Share on other sites More sharing options...
rOjterSWE Posted June 20, 2015 Share Posted June 20, 2015 The GPT modified disk allow you to run the OS in UEFI mode, so if your system allows you to do that GPT is better, otherwise just do the old fashion way. Link to comment Share on other sites More sharing options...
emperoraugust Posted June 21, 2015 Share Posted June 21, 2015 Hi everyone,my laptop in an Acer 5755g with these specifications:Processor: Intel HM67 Express Quad Core i7 2630QM 2GHz Base, 2.9GHz TurboRAM: 8GBiGPU: Intel HD Graphics 3000dGPU: NVIDIA GeForce GT 540M 2GBmPcie slot 2.0it's possible to install an egpu as the title of post or the cards are too powerful for my laptop? I think to buy a PE4C v2.1 ( PE4c v3.0 is better?).Thank you,Giacinto. Link to comment Share on other sites More sharing options...
kpyhere Posted June 21, 2015 Share Posted June 21, 2015 Sry, don't have a 2570P anymore. Anybody else want to have a go at a ASPM MBR patch to help kpyhere and other 2570P owners maximize their battery life? Anobody ? Link to comment Share on other sites More sharing options...
wormboy Posted June 21, 2015 Share Posted June 21, 2015 Hello nando...i wana ask about egpu diy setup.My Laptop model is inspiron 7520. could i posible install an egpu diy setup?if can i wana buy ... but i to scared that it failed to installed so i need your advice should i buy or not Link to comment Share on other sites More sharing options...
JohnEnglish Posted June 22, 2015 Share Posted June 22, 2015 Yes, it's been posted about previously.http://forum.techinferno.com/diy-e-gpu-projects/5329-thunderbolt-egpu-thunderbolt-display.html Link to comment Share on other sites More sharing options...
Boy Brawler Posted June 23, 2015 Share Posted June 23, 2015 Tech Inferno Fan please help me with my problem http://forum.techinferno.com/diy-e-gpu-projects/2109-diy-egpu-experiences-%5Bversion-2-0%5D-494.html#post136362 Link to comment Share on other sites More sharing options...
boycuoi Posted June 23, 2015 Share Posted June 23, 2015 My laptop Lenovo S410p with VCard Zotac 750ti, using egpu pcie 3.0 & Diy Egpu 1.30When DIY e-gpu get error FAIL! cannot enable x16 port on a Series-6+. ITs Txt-locked.If not using DIY - i get error 12 on Device Manager.So DIY e-gpu 1.30 doesn't support Chipset Series-6+ .Is it anyway to disbale dgpu or I need to buy egpu pcie 2.0 (I hear about new update pcie 2.0 support chipset 6+) ?Help pls .Thanknk u for ur read. Link to comment Share on other sites More sharing options...
wormboy Posted June 23, 2015 Share Posted June 23, 2015 Hello nando...i wana ask about egpu diy setup.My Laptop model is inspiron 7520. could i posible install an egpu diy setup?if can i wana buy ... but i to scared that it failed to installed so i need your advice should i buy or not? Link to comment Share on other sites More sharing options...
Tech Inferno Fan Posted June 23, 2015 Share Posted June 23, 2015 Hello nando...i wana ask about egpu diy setup.My Laptop model is inspiron 7520. could i posible install an egpu diy setup?if can i wana buy ... but i to scared that it failed to installed so i need your advice should i buy or not?There have been several Dell owner's linked from http://forum.techinferno.com/diy-e-gpu-projects/6578-implementations-hub-tb-ec-mpcie.html#dx11 that are using Setup 1.30 for various functions: resolve error 12 using PCIe compaction, disable dGPU, provide a diagnostic interface for eGPU detection, switch ports from Gen1<->Gen2, provide mPCIe whitelisting. Details of how to acquire the software are posted on the first post of this thread. Link to comment Share on other sites More sharing options...
drohun Posted June 23, 2015 Share Posted June 23, 2015 Tech Inferno Fan Can you help me here? I would be very grateful. Link to comment Share on other sites More sharing options...
Recommended Posts