Jump to content
EwinRacing Flash Series Gaming Chairs
J95

[Alienware - Clevo - MSI] Aftermarket Upgrades Driver Support - Modded INF

Recommended Posts

Ok problem sorted it was me as i could not fully understand the cmd commands, I have found a much easier way to disable the driver signature as follows

 

click start then settings

click update and security

click on recovery

click restart now under advanced startup

then when the blue box appears click troubleshoot

click advanced settings

then click restart

on startup you will get a blu box select by pressing 7 the comp will now startup with the driver sighning disabled

install driver and when you restart the driver sighning will automatically go back to normal.

 

It look drawn out but it took me about 2 minutes this way.

Share this post


Link to post
Share on other sites
12 hours ago, MATRIXAD said:

Ok problem sorted it was me as i could not fully understand the cmd commands, I have found a much easier way to disable the driver signature as follows

 

click start then settings

click update and security

click on recovery

click restart now under advanced startup

then when the blue box appears click troubleshoot

click advanced settings

then click restart

on startup you will get a blu box select by pressing 7 the comp will now startup with the driver sighning disabled

install driver and when you restart the driver sighning will automatically go back to normal.

 

It look drawn out but it took me about 2 minutes this way.

I always do this , TIP : you can simply press and hold SHIFT and click on restart it will show the same options :D

  • Thumbs Up 1

Share this post


Link to post
Share on other sites
On 8/16/2016 at 5:21 PM, J95 said:

Yep, already obsolete P870DM-G flagship, hopefully MSI's 1080 will work fine, even if I need to hard mod it...just not to spend a single dime on Clevo anymore...

 

Yeah, Was reading all the pascal threads..from my knowledge I think 870DM can take 2 MSI 1070 in SLI and one 1080 Clevo  *Prema magic*, He was saying Pascal needs some EC signal to respond with the card else wont fire..also the eDP LCD.
 

I think this Pascal refresh behind scenes were well planned by these corporates, First stab at the MXM3.0 form factor and the Unusual form factors and the real DT chips with gimped performance due to multitude of reasons as we know, very bad move honestly, all the previous HW can easily handle these new cards but they released so many new machines with BGA for more than 980M performance starting with 1060 powered Razer Blade which will throttle for sure as throttleboost3.0 is at work... Don't want to deviate too much, Apologies but here's this MXM 1060 (The URL shows 16L1 which is an MSI barebones/Eurocom Tornado F5 with LGA), which proves the Pascal can be designed with 3.0b afterall but they did that on purpose all those 1070 MSI's (idiotic corner tab) and Clevo pushing all the way to different design But hope they keep their faith next time if they fail us again then they are nothing less than Alienware, Still I'm worried more about HBM2...

 

Congos on the powerful machine anyways, We can make use of it much more than they expect :D , For the INF, vBIOS mods If it's wasn't you and Prema & swick so many people would have succumbed to that corporate filth.

 

Thanks again J95 keep up the good work.

Edited by Ashtrix
  • Thumbs Up 1

Share this post


Link to post
Share on other sites

A warning about 372.54 on the M18X R2. I would stay away from this driver version. It's has caused me nothing but issues with the 980m SLI. dim screen, random "hard" driver crashes, BSOD, random game crashing in Fallout 4. I rolled back to 369.05 and is well again.  (I am running Prema's internal v2 low V mod, this may or may not matter, Only bring it up due to the reduced TDP in the newer drivers)

 

Your milage my vary... This is only feedback in case one of you have issues as well :)

 

Extra Info, I use the newest version of DDU between driver versions, and perform "clean" installs of the drivers. Also tried the notebook version as well as the desktop version, and 3x each.

 

Note: Always use DDU in between driver versions.

 

Keep up the great work J95. "You da man"

Edited by kkthebeast
  • Thumbs Up 1

Share this post


Link to post
Share on other sites
On 8/6/2016 at 10:15 PM, Christian Ademius said:


@J95I am aware of that. The playback devices as the attached screenshot shows has one which says "not plugged in". I believe that is my HDMI-out to which my Smart TV is connected to. I cannot do much except disable it in properties. 

Capture.PNG



Anyone?

I had enough of alienware and DELL complicating things and limiting system modifications. I changed GFX from 460M to 680M 3-4 years ago and everything now on requires modding, hacking etc etc to get the drivers to work and I still cant get sound out of my HDMI to work since Win 10 (I think). 
If no one can help in this matter then I better start saving for a non-complicated laptop such as ASUS, should I not?

 

 

Share this post


Link to post
Share on other sites

Hello All

 

I need help. First time in my life I upgrade GPU in my Alienware 18m R2

I have 660M and now I get 980M (with g-sync)

 

I think I make all what @J95 write but nathink work. I can't install drivers.

In alienware bios GPU is show that it si inslot 1 "Nvidia GTX"  (bios ver A12) but in Windows 8.1 (safe mode or in normal mode) there is now Nvidia GTX in menager windows (no info about no drivers or unknow device)

I make all what was writem there http://forum.notebookreview.com/threads/step-by-step-980m-install-in-alienware-18.768916/

My be I make now samething wrong ..... Mayby there is same vBios problem ?? I try to install that but dont know what it write becouse that cmd windows close so fast.

vBios i download form that link https://biosmods.wordpress.com/aw18/

and drivers from http://forum.notebookreview.com/threads/step-by-step-980m-install-in-alienware-18.768916/

 

Thanks for help and info what i make wrong and one more time sorry for my English

 

Edited by Shiroe

Share this post


Link to post
Share on other sites
Guest
On 8/20/2016 at 4:39 AM, Shiroe said:

Hello All

 

I need help. First time in my life I upgrade GPU in my Alienware 18m R2

I have 660M and now I get 980M (with g-sync)

 

I think I make all what @J95 write but nathink work. I can't install drivers.

In alienware bios GPU is show that it si inslot 1 "Nvidia GTX"  (bios ver A12) but in Windows 8.1 (safe mode or in normal mode) there is now Nvidia GTX in menager windows (no info about no drivers or unknow device)

I make all what was writem there http://forum.notebookreview.com/threads/step-by-step-980m-install-in-alienware-18.768916/

My be I make now samething wrong ..... Mayby there is same vBios problem ?? I try to install that but dont know what it write becouse that cmd windows close so fast.

vBios i download form that link https://biosmods.wordpress.com/aw18/

and drivers from http://forum.notebookreview.com/threads/step-by-step-980m-install-in-alienware-18.768916/

 

Thanks for help and info what i make wrong and one more time sorry for my English

 

Sorry you are having trouble. GPU upgrades in laptops was almost always super easy for Alienware owners until Maxwell screwed up everything. NVIDIA has gone out of their way to make everything a pain in the ass now. Using Maxwell GPUs in an Alienware laptop is probably one of the worst upgrade experiences you could have chosen for your initiation ceremony. I hope it does not make you shy away from it in the future.

 

Just to confirm, you disabled Driver Signature Enforcement before attempting modded driver installation?

 

If you are trying to use MSI 980M cards, that could also be causing you extra grief. Are you using Clevo or MSI GPUs?

 

The hardware ID for your G-sync GPUs is different. It may need to be added to the driver INF mod. Can you please post your hardware ID from Device Manager? Also, please post a screen shot of the error message you see during driver installation attempts.

 

2016-08-21_21-44-52.jpg

Share this post


Link to post
Share on other sites

Hey guys,

 

I 'm pretty new with nvidia inf modding.

I did the M17x R2 7970M Xfire upgrade years ago but it didn't required messing with drivers.

 

I actually bought one 17 R1 (dead 765M, i7 4800MQ, 32Gb Ram....) , one 980M with prema undervolted v2 vBios and one 3 pipes heatsink.

 

It's booting fine and I installed drivers with the help of an very old guide (349 drivers).

 

First problem is : both card's (HD graphics+980M) are in device manager but if I press fn+f5 it starts fine but  with no card in device manager (microsoft standard vga, not possible to install any driver).

 

Second problem : none of the links in this thread works for me : (The page you requested does not exist Error code: 1S160/2)

 

Many thanks

 

Edited by dwood999

Share this post


Link to post
Share on other sites

@Mr. Fox

Thank you for your answer. Today I make it to all work. All what was wrong is that "ini" file what i download what not good moded and it dont work with drivers.

I download 372 drives and modyficated ini and all work.

Next stap was make it work all good with no throlling think.

That option work in my Alienware 18m R2 in 100%

http://forum.notebookreview.com/threads/alienware-m18x-r2-with-980m-possible-throttling-fix.791358/

 

You all people are great !!! you do lot of good work.

 

PS. And yes I almoust lost all my hair in one day hehe

 

 

New info from 2016.08.23

THROLLING is back. I get rangom trolling like 3 sec 2xx MHz and then back to 10xx MHz

In game like Star Citizen sametimes it can ruined game :) in Fallout 4 that 3 sec dont scary mi so much

Is there same difrend way to get out with that Throlling ?? Like difrent drivers or same difrent way of finish that Throlling problem ??

Edited by Shiroe
Throlling is back

Share this post


Link to post
Share on other sites

Throttling is back when you shutdown your machine. Upon boot make the GFX switch again and it is gone. Also throttling-fix isn't affected by making the system sleep.

On 10/6/2016 at 7:56 AM, haXBOXpro said:

 

  • Thumbs Up 1

Share this post


Link to post
Share on other sites
47 minutes ago, jerryzago said:

Throttling is back when you shutdown your machine. Upon boot make the GFX switch again and it is gone. Also throttling-fix isn't affected by making the system sleep.

 

You mean that all time when I shutdown my machine i need go back to BIOS and change in "video configuration" like

 

2) From the Advanced menu and Video Configuration, select as primary the IGFX
3) Save and exit and boot to windows.
4) Wait till all your aplications are loaded and reboot
5) Press F2 to enter BIOS again.
6) From the video configuration select PEG

Share this post


Link to post
Share on other sites

You read my post on NBR? Yes. Everything you shutdown your system you need to do the gtx switch. To Save time, don't boot to windows.1) power system, 2) enter bios, 3) from advanced menu and video configuration select iGFX, 4) Save and exit, 5) IMMIDIATELLY enter bios again, 6) switch to PEG from the same menu, 7) Boot to windows, 8) Post results.

 

 

 

 

 

 

 

 

 

  • Thumbs Up 1

Share this post


Link to post
Share on other sites
13 hours ago, jerryzago said:

You read my post on NBR? Yes. Everything you shutdown your system you need to do the gtx switch. To Save time, don't boot to windows.1) power system, 2) enter bios, 3) from advanced menu and video configuration select iGFX, 4) Save and exit, 5) IMMIDIATELLY enter bios again, 6) switch to PEG from the same menu, 7) Boot to windows, 8) Post results.

 

 

 

 

 

 

 

 

 

 

thanks a lot. It help in my laptop.

but now I have new problem and need to look on forum I same one have that problem and there I answer for that.

in short I don't have spikers or jack (audio)

Share this post


Link to post
Share on other sites
19 hours ago, Shiroe said:

 

thanks a lot. It help in my laptop.

but now I have new problem and need to look on forum I same one have that problem and there I answer for that.

in short I don't have spikers or jack (audio)

 

You need to download and install this driver from dell website(its the correct drivers + software which you need for the audio jacks to work properly):

http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=G340X

 

And also as @J95 mentioned previously make sure DSE is disabled before AND after installation, otherwise the software will disappear again once you update!

Edited by haXBOXpro
  • Thumbs Up 2

Share this post


Link to post
Share on other sites

For anyone that don't know. I purchased Oculus Rift CV1 in hopes it works with m17 R4 with 980m 8 GB. Well, it works with no problems whatsoever. Went through Oculus setup and have played about an hour of Lucky's tale with no stuttering and beautiful VR. Also used Virtual Desktop to play Doom 2016 and it also works as it's supposed too. Was worried since HDMI is connected to motherboard and not gfx card but it still works and runs no problem. Downloading edge of nowhere now to test. Extremely happy with my 980m. Won't need to upgrade for a while. I am running dedicated with no Intel drivers installed. 

 

Update 8-29-16 Installed Edge of Nowhere and another title runs flawlessly on Oculus Rift CV1.  

Edited by momulah
  • Thumbs Up 1

Share this post


Link to post
Share on other sites

@Mr. Fox & @J95 I had a werid problem just today , I had a BSOD   "IRQL_GT_ZERO_AT_SYSTEM_SERVICE"    the problem happened after , as soons as I restarted the laptop BIOS autamticly switched to RAID ( I wasn't on raid and seems like the BIOS resetting it self but not totally since the clock was correct ) and could not boot ( obviously ) so I switched back to AHCI .

But now the BIOS doesn't see any drive AT all UNLESS I switch to RAID ( and only raid ) I was able to boot back to windows with Legacy Boot is on , if I turn Legecy boot off the BIOS will not see any drive .

I tried to load default settings but didn't work 
I tried to remove my 3 HDD ( except SSD ) still didn't work 
ePGA did the see the drive with AHCI on 

I think my only solution is a BIOS reset with removing the CMOS Battery ( I cant at the moment )

What do you think anybody had this before 

TL DR 
Laptop hade BSOD the bios messed up the settings by it self and now cant see any drive if I have UEFI and AHCI on :( 

Please help 

Share this post


Link to post
Share on other sites

beta drivers are out - 372.70.

 

EDIT: They're full release :P

Edited by thegh0sts
  • Thumbs Up 1

Share this post


Link to post
Share on other sites

GeForce 372.70


    *Install drivers at your own risk* Windows 10 + GeForce Drivers are Killing Samsung and LG Notebook LCD Display Panels
      Uninstall both PrecisionX & MSI Afterburner (Keep RTSS) including screen overclocking tools *Still at risk*

 

       Requirements:

       Flash latest @Prema's v2 980M & 970M (Please consider donating to Prema)


  • Win10/8.1 'F8' Boot options 'Safe Mode' & 'Disable driver Signing'
    cmd (Admin)
bcdedit /set {default} bootmenupolicy legacy

 

        -> reboot -> F8 -> select 'Disable Driver Signature Enforcement' -> Install drivers

  • Run DDU "Clean & Shutdown (Safe Mode)
  • Extract driver using 7-Zip
  • Display.Driver folder,  copy/overwrite the proper .inf file(s).
  • Extracted driver package >> delete the following folders as shown below (don't skip this step)  -> run setup.exe  

       >>> Keep these folders only <<<

372.54.PNG

 

 

 

    INF MOD v372.70

   

nv_dispi.inf (including nvdmi.inf) PEG/Dedicated All Models: M15x, M17x, AW17 R1, M18x, AW18 R1 (including Optimus/M17xR4) excluding AW 2015 - GTX 980 , 980M , 970M , 965M , 880M , 870M , 860M , 780M , 770M , 765M , 680M , 675MX , 670MX , 660M

 

nvcvi.inf: Optimus Alienware 17 / 05AA (only) GTX 980M - 970M - 965M

    

GeForce 372.70 Win 7/8.1


GeForce 372.70 Win10 RS1

 

 

Alienware Laptops

nv_dispi.inf_v372.70_Win7_8.1_PEG_Dedicated_Alienware.zip

nvcvi.inf_v372.70_Win7_8.1_Optimus_Alienware_17.zip

 

nv_dispi.inf_v372.70_Win10_PEG_Dedicated_Alienware.zip

nvcvi.inf_v372.70_Win10_Optimus_Alienware_17.zip

 

Clevo Laptops (non-Optimus)

nv_dispi.inf_v372.70_Win7_8.1_PEG_Dedicated_CLEVO.zip

nv_dispi.inf_v372.70_Win10_PEG_Dedicated_CLEVO.zip

 

 

AW 900M Throttling workarounds:

M18xR2

 

Flash @Swick1981 [Bios Mod] M18xR2 - Legacy Support now Available 

M18xR2 980M workaround

 

Hibernation method HERE and HERE

 

 

 

@ All please use the SEARCH function to see if your question has been answered/posted already.

 

On 7/9/2016 at 3:03 AM, J95 said:

@_ALL if you are enjoying @Prema's  work, please consider making a contribution HERE.

 

 

Much appreciated!

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Great stuff guys!!

 

Cant seem to download any of the inf zip's. am i doing something wrong here?

- edit; becoming an elite member enambled me to download. Would be an idea to change the error message to a become an elite member suggestion ;)

Thanks!

Edited by Ed970M
  • Thumbs Up 1

Share this post


Link to post
Share on other sites
On 8/29/2016 at 4:21 PM, HaloTechnology said:

@Mr. Fox & @J95 I had a werid problem just today , I had a BSOD   "IRQL_GT_ZERO_AT_SYSTEM_SERVICE"    the problem happened after , as soons as I restarted the laptop BIOS autamticly switched to RAID ( I wasn't on raid and seems like the BIOS resetting it self but not totally since the clock was correct ) and could not boot ( obviously ) so I switched back to AHCI .

But now the BIOS doesn't see any drive AT all UNLESS I switch to RAID ( and only raid ) I was able to boot back to windows with Legacy Boot is on , if I turn Legecy boot off the BIOS will not see any drive .

I tried to load default settings but didn't work 
I tried to remove my 3 HDD ( except SSD ) still didn't work 
ePGA did the see the drive with AHCI on 

I think my only solution is a BIOS reset with removing the CMOS Battery ( I cant at the moment )

What do you think anybody had this before 

TL DR 
Laptop hade BSOD the bios messed up the settings by it self and now cant see any drive if I have UEFI and AHCI on :( 

Please help 

@HaloTechnology  Run Memtest then try clearing CMOS,

This was after upgrading to RS1? if so try a clean install and use Win10 native AHCI drivers.
 

 

 

On 8/25/2016 at 8:35 PM, haXBOXpro said:

 

You need to download and install this driver from dell website(its the correct drivers + software which you need for the audio jacks to work properly):

http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=G340X

 

And also as @J95 mentioned previously make sure DSE is disabled before AND after installation, otherwise the software will disappear again once you update!

 

@haXBOXpro, @Shiroe you need to clean install modded Creative drivers from HERE (latest full package), otherwise Recon3Di control panel won't work. Just disable DSE (F8) before and after installing drivers.

 

 

  • Thumbs Up 1

Share this post


Link to post
Share on other sites
On 8/19/2016 at 8:02 AM, Christian Ademius said:



Anyone?

I had enough of alienware and DELL complicating things and limiting system modifications. I changed GFX from 460M to 680M 3-4 years ago and everything now on requires modding, hacking etc etc to get the drivers to work and I still cant get sound out of my HDMI to work since Win 10 (I think). 
If no one can help in this matter then I better start saving for a non-complicated laptop such as ASUS, should I not?

 

 

Did you change BIOS sound card settings? those are required for the 780M only, not 680M.

You will need to install IDT drivers.

 

Share this post


Link to post
Share on other sites

Hello

 

I have a GTX 780m on an Alienware M17xr3 Windows 7. The card is working find but I want to update from 344.75 to 372.70.

 

I was able to update yesterday from 344.11 to 344.75 to experiment on how I could do it. Found a guide and was able to do it no problem. From there I was directed here to upgrade to a 372.70. I pretty much have no idea how this works since I am fairly new at this.

 

I got what you were saying but when I try to download your  modded inf nv_dispi.inf_v372.70_Win7_8.1_PEG_Dedicated_Alienware.zip it keeps giving me the "page not found" error so I was just wondering if was only me that was having this problem.

 

-edit

Oh I completely missed a comment that said the reason why it was so XD

 

-edit 2

Just adding this, installed it perfectly followed instructions and it works amazingly. Crazy good stuff  THANKS!!:hyper:

Edited by Botxander
Missed a comment with information I needed
  • Thumbs Up 2

Share this post


Link to post
Share on other sites
On 30.08.2016 at 9:13 PM, J95 said:

 

@haXBOXpro, @Shiroe you need to clean install modded Creative drivers from HERE (latest full package), otherwise Recon3Di control panel won't work. Just disable DSE (F8) before and after installing drivers.

 

 

 

Sorry for stupid question but what is that "DSE" ??

Share this post


Link to post
Share on other sites
7 hours ago, Shiroe said:

 

Sorry for stupid question but what is that "DSE" ??

 

Driver Signature Enforcement.

 

Open command prompt in Administrator mode then type:  "bcdedit /set {default} bootmenupolicy legacy" (without quotes)  -> Hit enter -> reboot -> Keep holding "F8" key -> Select "Disable Driver Signature Enforcement" -> finally Install drivers.

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Onehit
      I've been scouring the internet in search of anything regarding an updated bios for my Clevo P170SM. I have found many mentions of Prema Bios mods on various websites, but good luck trying to find actual download links. They all seem to vanish or have dead links. Wayback Machine doesn't help either and I was only able to find stock Clevo bios as early as 2015 via the WayBack Machine. If anybody has an updates Prema Bios or some other unlocked bios file for the P170SM, that would be fantastic! Otherwise, I might have to consider paying over $100 to Eurocom for their unlocked bios.
    • By Henrik9979
      Okay here is what's going. I have a alienware m18x r1 running an amd 8970m, I wanted to upgrade it to crossfire but I could see a 8970m was more expensive than a r9 m290x
      So I decided to buy a r9 m290x and see if I could make it work in my alienware and also run crossfire.
      Even though many shops refused to sell me one because the didn't think it would work in an alienware m18x r1 only in the r2.
       
      Here is the whole process.
       
      19/08/17 23:15
      No post bios showing when booting, so impossible to enter bios menu, but can boot into windows 10 with no problems.
       
      19/08/17 23:20
      Because I haven't deleted the old AMD 8970m the r9 m290x shows as a 8970m with no problems.
       
      19/08/17 23:34
      First performance test was a success. The r9 m290x changed p-state normally. The gpu fan start spinning normally. But because of no thermal paste, the test lasted 20 seconds because the temperature raised fast.
       
      20/08/17 00:00
      Created a backup of the vbios version
      015.032.000.004.044450
       
      20/08/17 00:10
      Flashed a new clevo vbios version 015.032.000.003.044465
      Caused the card to be corrupted and resulted the 8 beep code.
       
      20/08/17 00:35
      Finally managed to flash the back and return the graphics card to its original state.

      20/08/17 00:50
      Flashed a new dell vbios version 015.046.000.014.045579
      No change in behavior
       
      20/08/17 01:07
      After trying multiple vbios with no luck I finally found one.
      Dell vbios Version 015.041.000.000.044966
      Brings back the post bios screen and I can now enter the bios menu through the r9 m290x.
      Note: This vbios reduce the cards performance from 900 mhz to 850 mhz
       
      20/08/17 01:21
      After more testing I found one that is working with no limits.
      Clevo vbios version
      015.036.000.005.044618
      Brings back the post bios screen and I can now enter the bios menu through the r9 m290x.
      This will be the vbios I will keep at the moment.

      20/08/17 01:56
      I completely uninstalled the previous driver and installed the newest driver. The graphics card is recognized as a 8970m but works normal.

      21/08/17 20:15
      I have inserted my old 8970m in the secondary slot and will start testing crossfire.
       
      21/08/17 21:45
      I have found out that the fan for the secondary fan did not spin. The is a cable that have felt out. I will fix it now.

      21/08/17 22:00
      In my try to test crossfire compatibility, I installed the newest AMD driver 17.7.2 but as soon it installed the driver for the secondary card it caused black screen. Only booting the computer in safe mode brings the screen back.

      21/08/17 23:02
      After many frustrating hours I finally managed to get crossfire working with the r9 m290x as the primary card and my old 8970m as the secondary.
      I have flashed the same vbios on both cards so the r9 m290x shows up I device manager as a 8970m.
       
      I first installed AMD driver version 16.2.1
       
      Then installed AMD driver version 16.6.1 in order to play battlefield

      21/08/17 23:20
      First test run in battlefield 1

      21/08/17 23:40
      Battlefield 1 is flickering bad, this can maybe be solved with a new patch or driver.
      Other games I have tried is working perfect with crossfire on.


      Now what I would like to try is somehow force the r9 m290x driver to be installed and see if it will make it possible to run the latest AMD driver without getting a blackscreen.
       
      I have tried to edit the .inf file like you would do with nvidia but no luck.
      I have also tried to figure out how to edit the device id in the vbios, but I find it too complex.
    • By rsk
      Hello everyone just a little question. 
       
      i've just flash my p751dm2-g with the backed's bios and i gonna overclock it of course but i don't know how to clear cmos on this laptop.
      i have find nothing about it in the manual so i ask here. 
       
      Thanks 
    • By rsk
      Hello everyone I'm new on this forum and i'm new with clevo laptop. 
      I've recently buy a second hand laptop a clevo p751dm2-g with a i7 6700k and a 1070 mxm and unfortunatly the bios is locked i can't overclock my cpu or my ram. :sadge: 
      So i wanted to know if you guys on this forum have alternative solution to oc your cpu and your ram with a locked bios. 
      Thanks 
    • By Klem
      Klem's_vbios_MSI_GTX880M_80.04.EA.00.03_UNLOCKED.rar
      For both, 4Gb and 8Gb card.
      1. Unlocked Nvidia core limit +135 MHz.
      2. Unlocked Power Limit.
      3. Unlocked Power adjustment by software (for example with Nvidia Inspector).
      4. Increased Power Limit and Power Target.
      5. Enabled some additional tweaks.
       
      If you liked my mod, you can buy me some beer:   https://www.buymeacoffee.com/ekushukovZ
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.