Search the Community

computer: lenovo W530 + 8Gb + SSD evo 512 (MBR) + 3720QM igpu: HD4000 dgpu: k2000m egpu: MSI 1060 GTX Gaming X 3G os: win10 64bits drivers: nvidia 372.70 PSU: corsair RM550 adapter egpu: - GDC v8 (express card) : PWR ON - PTD (center 75) - PE4C V3.0 (express card) : PWR ON - SW1(1) - SW2 (2) bios: - igpu, dgpu, optimus activate - legacy only - no virtualization intel setup 1.31: - dGPU off - egpu port gen2 - compaction igpu + egpu with 56gb and only egpu in 32bit Hi, Actually I cant use PE4C. I cant load setup 1.31 (error) to correct the error 12. With the "Beast" after a lot of try now I can use the external monitor on the EGPU. But : Sometimes need desable and enable the GTX to detect the monitor Sometimes windows start with error 43 need desable and enable the GTX to resolve I can only use the DVi, with the DP(displayport), windows reboot after 30sec Windows reboot (blackscreen and rebbot) a lot of times I succeed a bench with 3D mark (fire): 8059 pts - graphics (9517 pts, 44.5fps, 38.67fps) - physics (8987 pts, 28.53fps) - combined (3499 pts, 16.28 fps) Do you thinks the result are correct for the config ? Actually the system is too unstable (reboot all 15min, only DVI, monitor detection unstable, sometimes error 43) ... do you see why ? thanks