Search the Community
Showing results for tags 'rmbp'.
No issue up to now, everything is stable, easy and cheap setup. However, Nvidia Optimus isn't working with latest Nvidia drivers. Hardware: - Mac mini Late 2012 (MD387LL/A) / Macbook Pro Retina Late 2013 (ME293LL/A) - Akitio Thunder2 - Zotac GTX1050Ti - Samsung T3 Portable SSD - 250GB (for Windows To Go) - DC 12V/12.5A from Aliexpress Setup: - Install Windows 10 as Windows To Go with Rufus; - Install Bootcamp; - Reboot to Windows with Akitio connected and install latest Nvidia Driver; System Start: - Connect External SSD with Windows To Go to your Mac; - Power up and hold down ALT keyboard; - Connect Akitio and wait 2-4 minutes; - Choose Windows from boot menu; sorry guys, I can't attach files here, every times it gives me an error. I uploaded images and benchmarks to my google drive here
Hi everyone. I am looking for some direction/advice on setting up an eGPU for my rMBP. I am more of a software and cloud networking guy then a hardware/graphics guy - so I am out of my area of expertise here. Any assistance is greatly appreciated. NOTE: I have a multiple display/monitor addiction. The more monitors the better - and that is the main reason I am here. My current setup: Mid 2012 rMBP 2.3 GHz Core i7 8GB Ram NVIDIA GeForce GT 650M 1024 MB integrated graphics Two (2) 1080p 24 inch external monitors (one connected via thunderbolt port, and the other connected via HDMI) One (1) 1080p 21 in external monitor (connected via the other thunderbolt port). So yes, I am running three (3) external monitors off of my mid 2012 rMBP. And, it actually runs fairly well. Include the rMBP display, and I am running a four (4) monitor setup. I can usually have youtube playing on one monitor and browsers on the other, while still maintaining decent performance. I am actually really surprised at how well it works for a 4+ year old computer. However, there are some apps that I run which require me to unplug one or two of the monitors, and the rMBP is almost always running hot. And obviously, I can forget about doing any kind of high-end gaming (which I rarely ever do at all). Where I am going: My company is giving me a spec'ed out mid 2015 rMBP (which I should have in a few days). Mid 2015 rMBP 2.8 GHz Core i7 16GB Ram AMD Radeon R9 M370X 2048 MB (dedicated GPU) I am very excited to get a nice spec bump over my 2012 rMBP, especially going from 8GB to 16 GB ram. And I am sure performance will be that much better with my three (3) external monitors attached. What I want: More monitors! 4k monitors! Here is the setup I would like: My new mid 2015 rMBP docked (probably using something like the Henge vertical dock station). Run five (5) external monitors - one vertical and 4 horizontal. Monitor (1): Supplement the rMBP display (since it will be stowed in the dock) with a 24 inch 4k monitor. Monitor (2): Another 24 inch 24 monitor Monitors (3), (4), and (5) - these no NOT have to be 4k. Will probably just use the three (3) external monitors I already have (mentioned above). Priorities: Gaming is NOT my priority. If I can play GTA 5 in ultra mode - great! But I would consider that an extra benefit. I rarely play new games. I am more of a 16-bit, 2D platformer guy. I have done some VR development, and if I could run the Oculus Rift or Vive - then that would be really nice. My main priority is to power all these monitors while removing at much load as possible from the rMBP - so that I can run virtual machines/edit video/have 50 chrome tabs open - all while playing and HD youtube video (you get the idea). Here are my questions: (1) Will using an eGPU offload a lot of processing power so the rMBP can concentrate on running many apps at once? (2) If games are not a priority, are there graphics cards that may be cheaper which are designed for running more monitors vs. powering games? Or is it all one in the same? (3) I notice that many GPUs only have 2 or 3 video out ports. How can I go about connecting 5 monitors to the eGPU - if it is even possible? Or, would I still need to run one or two monitors directly off the rMBP? (4) Am I missing any details/information/questions that will be important? What am I missing or not thinking of? Thank you in advance for all and any advice.
Hi guys, When I discovered about eGPUs I wanted to find the easiest and simplest way to set up one, because I saw that there were many ways to make it and some of them were very complex, and I am not a techie nor a software guy at all. I am very grateful to the people that selfessly shared their findings so I hope to help a bit with this guide. One thousand thanks to Dschjin for his help and patience, to Izzard for solving doubts about opening the Akitio case and to everyone else helping through the forum. By the way, feel free to contact me or to comment here if you have any doubts. I will try to help, from noob to noob. Hardware: rMBP 15” early 2013 with nVIDIA GT 650m MSI GTX 970 Gaming 4G Akitio Thunder2 Dell DA-2 DIY cable to power up enclosure and GPU from DA-2 (6&8 pin and DC). Thanks Dschjin again. Full HD TV with HDMI connection Thunderbolt cable (Apple original, 2m). HDMI cable. Software: Windows 10 Home Edition, 64-bit eGPU setup 1.2 from Nando4 OK, my first thought was to buy the Gigabyte GTX 970 G1 Gaming because I read that it was the most powerful and with best OC card for the price. Now there’s the Extreme Gaming too that is about a 10% better I think (and more expensive as well). But as a compact solution I wanted to use the DA-2 instead of a regular PSU in order to power the eGPU, and I was told that the DA-2 wouldn’t be able to supply enough power for the Gigabyte graphics card. But it turned out that the MSI Gaming was equally great, silent, cool and, the best of all: compatible with the DA-2. It looks like its max power consumption is 200W at 100% and 220W at 110%, so you can even overclock the card to its maximum (I have read that the DA-2 can supply up to 240W, but in any case 220W is fine). So I bought the Akitio to the Spanish vendor indicated in their website, called iDATA (although they only serve professionals) for around 200€, and the Dell in Amazon for around 27€ with shipping. I don’t know to solder at all so I tried to buy the DIY cable in Amazon US to the vendor named in the forum, but they only ship to the US. So I asked a friend in the forum and he agreed to make one for me for a very reasonable price. OK, as you may know you have to open and bend the Akitio case in order to fit this graphics card. But I wanted to try the system before doing it and losing the warranty. I knew that others like w4vz made it work, but that was quite a lot of money to be wasted. BTW I looked for 2nd hand Akitios on the net and didn’t find a single one! So what I did was to disassemble the circuitry from the Akitio case. It is actually very easy to do, just take out some screws. The only problem I had was with a cable that covered one of them. Then I tried the eGPU with the GTX 970 connected to the Akitio circuitry, without its case. At this point I have to admit that I had a bad time. I did it late at night and was nervous and tired, and was afraid to break something. If you have to do that, better with time, daylight and being relaxed. In this sense, it is worth considering buying an ITX card. They are also powerful (maybe some 5-7% less that the best performers but still a bit more than the reference one, and with some margin to OC) so the difference shouldn’t be big, and with the advantage that you can use the Akitio case without having to bend or break anything. Now I wouldn’t change, but maybe at that moment I might have done so. Some cards –you can find the info in the forum- even allow to close the case but then you’ll have to open big holes so the fans can do their job so it’s not the best option for lazy busy guys like me. In any case, I tried the system. I have done the steps seen at the forum, without doing anything to windows: - Download nVidia drivers for your GPU - Start computer, wait some seconds at boot screen - Plug eGPU, wait some seconds - Boot - Install latest drivers for GPU This didn’t work for me, getting error code 35. I tried different things like plugging eGPU at different moments of the process, but error 35 was there. Later on, I tried to boot Windows 10 with the eGPU attached, then connected the eGPU, followed the wizard to install drivers and got error 12. Nando4 eGPU setup software was supposed to solve 100% of them so as I didn’t know how to overcome the error and didn’t want to reinstall Windows or to look for complicated procedures, I purchased the software and (luckily) took the risk. Then I opened the case using Izzard’s tutorial. As I feared that hitting the case might damage the circuitry, I previously disassembled the case taking out the circuit board again. Then opening the case wasn’t difficult, just be careful when you’re bending the case to make it evenly. I skipped the last part –flattening the whole thing-, as this is only for aesthethic purposes and I’m the only one that sees my precioussssss. Connecting everything does not have any mistery: - connect the card to the Akitio case (you’ll have to screw it afterwards with one or two of the top screws). - Plug the DIY cable to the 6 or/and 8 pins of your card and to the DC connection of the Akitio. - Connect DIY cable to DA-2/PSU. - Plug DA-2/PSU. - Connect with Thunderbolt cable the Akitio case and your laptop. - Connect HDMI cable or other to external monitor and the graphics card. My only problem was that the DIY cable was a bit tight to arrive to the 6 and 8 pin connectors and the barrel connection at the same time. Besides, because of the design of the card the cables were touching the GTX 970 pipes, which could be a problem in the long term. So I bought some good extension cables in Amazon. Connecting the DA-2 to the DIY cable seems difficult in the beginning because they don’t seem to fit, but I’ve been told to cut 2-3 mm from the DIY cable connector and then force it. After a bit of effort they connect perfectly. I disconnect and connect everything every time that I use the eGPU, but so far after maybe 20 times it keeps working smoothly. Software setup What worked for me was letting the system detect the new hardware and look for drivers and installing them. Then after rebooting windows I could install eGPU Setup software and play. OK, then I installed Nando4 eGPU Setup and followed steps in w4vz tutorial. Don’t be scared by them, it’s easy. Just do as follows: 1. Set up the eGPU and switch it on. 2. Boot computer. 3. In booting menu, select Windows. 4. Then you will have to choose between windows and eGPU Setup. Select the latter. 5. Press 2 to select option 2 (remember that in Macs using up and down arrow will hang the system). 6. You will see in the upper right square that two parameters (sorry now I don’t remember) will be as “no”. Select “PCI” -> PCI Compaction -> All Except SATA. After the process they should change to “yes”. 7. Select Pci.bat -> Test pci.bat . 8. Reboot computer 9. Select eGPU Setup 10. Select option 1 11. In the next menu, select Windows 12. Cross your fingers (and toes!) and, hopefully, enjoy! If your eGPU is detected by the system without errors, you will be able to use the external monitor in NVIDIA control software. I tested the eGPU with 3Dmark and obtained a 8800 score, which is not bad at all. Tried to overclock the card a bit and had around 9700, that is quite great and similar to the about 10.000 gotten by the reviews on the net made with desktop gaming computers. You can see the OC parameters in 3Dmark. Compared with the 1800 that I got with the GT 650m, it is a huge leap in power! I used to play Dragon Age: Inquisition at medium settings and 720p getting around 25 fps, and now I can play at Ultra settings getting an average of 40 fps or more at the game benchmark. http://www.3dmark.com/3dm/10965412 The only software problem I had was that every time that I used the eGPU again I had to follow all the steps from 1 on (doing a PCI compaction and test startup). Besides, when doing step 10 many times eGPU setup got stuck and I had to reboot and start from step 1 several times until it worked. Now I tried to change the process by switching the eGPU on when the booting menu appears on step 3. Then I can select windows and follow from step 10 on. This config seems to work a bit differently (some minor things like MSI gaming app don’t work) but is enough to play games and generally works. I think that I didn’t forget anything. In any case, if you have any doubt feel free to ask and I will try to answer. Just remember that I am a noob! Wish you luck with your eGPU projects and much fun playing games at Ultra Settings!
Been lurking for a while. I wanted to share some of my experience with the AKiTiO enclosure. I am specifically trying to make AMD cards work with Yosemite, as I have a Iris Pro only mid 2014 rMBP, and cannot get external displays working with my GTX 750Ti... I have only been able to get a couple of cards to work (Microcenter is starting to get tired of me exchanging cards every other day.). Finally, decided I am going to fight to get the R9 280X to work with Yosemite, even though it's larger and more expensive than I originally wanted. While I;m having trouble with Yosemite, I decided I would try Win8.1/BootCamp and see if at least the hardware worked. First I bought a larger 10A(120W) power brick, did the tape trick and soldered power to the PCIe slot to support 75W to the slot. I used a Corsair CS650M ATX power supply for the 6 and 8 pin power to the XFX R9 280X DD 3GB card. Not wanting to mess with the enclosure yet (in hopes someone will figure out the nvidia output on the iris pro rMBP), I have the PCB naked on my desk. First boots into windows, were ok at the desktop, but unique heaven at anything above 1280x720, or using full-screen caused failure (blinking screens, crashes, or snowy)... I thought maybe it was the two different power supplies, I went ahead and soldered 2 x 18g yellow and black wires to the CPU 8pin connector on the Corsair ATX PS. Making the ATiKiO completely running off of the Corsair PSU. Immediately saw improvement in Windows 8.1, boots perfectly, and runs Heaven at full screen @1080p, with HIGH settings, and 2X AA, it ran smoothly and perfectly. AVG FPS was somewhere around 50FPS (can't remember off the top). So the dual power supplies were causing some instability. Now if I can figure out how to get Yosemite to boot fully with the IOPCITunnelCompatible injected into kexts, I would be happy... Thanks for all the insights here, especially goalgue, Tech Inferno Fan, mvc -- Thanks!