Search the Community
Showing results for tags 'psu mod'.
Found 2 results
Does anyone happen to know if the EPROM chip in the 240W PSUs from the m17x-R2 can be extracted/de-soldered and placed inside of the 330W PSU to override the "unsupported adapter" errors when powering up the R2 w/o the 240W? From the research that I've been doing, both use the 1-Wire Design from Maxim Innovation. But what I cannot find are the internal pictures and schematics of the 330W PSU to even contemplate this as a viable mod. Ideally, I'd like to have a lighter option than 2 x 240W PSUs to power my R2. Thanks guys.
Hi everybody, So i got some questions for those with experience...cause i cant really find a answer to this, I tested the 680M GTX with the nice vbios from the forum 1,025v / 1,050v. I wasnt able to get the GPU core stable above 950 Mhz while other people can reach 1000 core clock on 680m gtx. the 950Mhz are stable but when i try go up it doesnt work. I flashed the 1,050v to test and its still crashing in 3dmark 11/ Vantage. even 960-970 is not stable with 1,050... the Temps arent the problem, i got the laptop open to test and its still crashing even after using 100% FAN MODE (no Dust) So could it be my power supply 180W that is not enough? even though i use i7 3610qm @[email protected] i got 2x same power supply and i was thinking if there is a way to fusion them...i saw somewhere a connector mod to fusion 2x 180W power supply from p150em but i dont remember where.