Search the Community
Showing results for tags 'gtx570'.
Found 2 results
CrzyGK posted a topic in DIY e-GPU ProjectsHello, I've posted about this a few times, but still no solution. I have a GTX 570(Have also tried a GTX 560ti) connected to a Dell 6440 dGPU version (Yes, I've already made posts in the Dell 6440 thread by Nando regarding this) using a Bplus PE4C V3.0 (Have also tried with a GDC Beast V8). My problem is that my eGPU shows up in device manger with no errors. Multiple versions of nvidia drivers detect it and install successfully. Everything looks like it should be working. What is happening, is that GPU-Z, dxdiag, nor any benchmarking software will detect it and Windows 10 (Have tried fresh installs of both 10 and Windows 7 Pro) does not detect any external monitors I attach to it. I have tried disabling my dGPU in DIY 1.30 and set it to initialize my eGPU. The best part about this is that it works sometimes! About once every 12 reboots or so, I can uninstall and reinstall my nvidia drivers and the first time my monitors flicker/flash during the install, it works. It will be detected everywhere and it runs absolutely amazing until the next reboot, then I have to mess around the drivers for an hour and it will seemingly magically start working again. I have wrote down every little thing I do to log my actions each time and there is seriously no pattern. I can do the exact same thing (reboot, uninstall drivers, reinstall drivers, reboot, repeat) for an hour and it will work eventually. Possibly Relevant Info: Dell 6440 w/ dGPU option i7 4600MQ 8GB RAM mSata 250GB Samsung Evo Windows 10 Pro (Have tried 7 Pro) x64 GTX 570 (Tried GTX 560ti) Bplus PE4C V3.0 Dock (Have tried GDC Beast V8) Dell DA-2 220W PSU (Have tried 2 other ATX PSU's) I have only found a small handful of people who have posted about this issue, but not resolutions. If anyone could help I would be super grateful. Edit: Also, sleep/resume breaks this when it does work. (I get a Blue Screen) Edit: I'm so invested in this setup right now (Few Hundred Bucks and a couple months of on-off trying to get this reliably working), I'll seriously PayPal $20 to the first person who can help me.
I've been trying to get my eGPU setup working for a couple of days now. So far, I have a GTX 570 attached via an exp gdc beast (expresscard version) to my Dell Latitude e6440. There are no errors reporting in device manager and it reads "This device is working properly." Despite this, I cannot seem to get my system to play nice with the card. I have the standard Windows automatically-installed drivers right now and if I install nvidia drivers for the card, the install succeeds, but device manager reports an error 43. With just the system default drivers installed, Windows will not detect any monitors attached to the GPU. I also do not see the eGPU in dxdiag, though I'm not sure if I'm suppose to, as this is my first attempt at such a setup. I am running Windows 10 Pro 64bit with latest updates. I have not found any posts similar to this issue and any help would be greatly appreciated. Thank you.