Jump to content
Click or hover over image to zoom in

USB Cable Remote Control of ATX Power Supply Status LEDs & Bridge Jumper On/Off Switch (Lighted) For 24/20 Pin PSU Connector

(0 reviews)
15.75 USD
Remotely control power from ATX 24 Pin or 20 Pin PSU when it is not connected to a motherboard. When buyer supplied USB cable is connected to Desktop, Laptop, or USB Hub then PSU powers On/Off with the connected computer or hub. If USB port is always on then inserting/removing cable connector also works to control PSU power state. Does not use cable's data line only +5V and GND. For longer runs or routing through walls consider USB 2 Wire Model https://www.amazon.com/dp/B01KIV640K  
Status of PSU shown on 3mm Flat Top LEDs with wire length about 20 inches. Status: Standby=Yellow, Power Good=Green, Power On=Red. Four PSU Status LEDs supplied. You select colors and meanings. See second image at left. LEDs come with Black LED mounting holder for mounting in enclosure. Four LEDs shipped standard: 1 Yellow (Standby), 1 Green, (Power Good) 1 Red (Power ON), and 1 Blue (Spare). Orange and White available on request. Specify number of each color and Status color.  
A lighted On/Off master switch provided. On/Off switch connection is 4.8mm standard spade connection. Select from two styles (Full Lighted Face and LED Dot) and four colors (Red, Yellow/Amber, Green, or Blue). See second image at left. You can use your own SPST latching switch lighted or unlighted instead of supplied switch. Message me for important information before ordering this product or your switch.  
Can't ship until you message the LED colors and switch style and color that you want. Sample Order Message: Send the following with PSU Switch: LEDs = Yellow, Green, Red, and Blue. Switch = Full Face Red. Mailed USPS First Class Parcel from USA, usually same day. You will receive tracking number and expected delivery day when mailed. Reduced shipping fee if you order more than one.  
All ATX PSU Remotes Control Models:
 
2) USB 2 Wire ON/OFF with USB power (Buyer Supplied Wire)
3) 2 Wire (Buyer Supplied Wire and Momentary Switch)
4) IR
5) 433 mhz RF
 
6) 315 mhz RF
 


  • Orange and White available on request. Specify number of each color and Status color. Sample Order Message: Send the following with PSU Switch: LEDs = Yellow, Green, Red, and Blue. Switch = Full Face Red

  • You can use your own SPST latching switch lighted or unlighted instead of supplied switch. Message me for important information before ordering this product or your switch.

About USB Cable Remote Control of ATX Power Supply Status LEDs & Bridge Jumper On/Off Switch (Lighted) For 24/20 Pin PSU Connector

  • Remotely control power from ATX 24 Pin or 20 Pin PSU when it is not connected to a motherboard. When buyer supplied USB cable is connected to Desktop, Laptop, or USB Hub then PSU powers On/Off with the connected computer or hub. If USB port is always on then inserting/removing cable connector also works to control PSU power state. Does not use cable's data line only +5V and GND. For longer runs or routing through walls consider USB 2 Wire Model https://www.amazon.com/dp/B01KIV640K

 

  • Status of PSU shown on 3mm Flat Top LEDs with wire length about 20 inches. Status: Standby=Yellow, Power Good=Green, Power On=Red. Four PSU Status LEDs supplied. You select colors and meanings. See second image at left. LEDs come with Black LED mounting holder for mounting in enclosure. Four LEDs shipped standard: 1 Yellow (Standby), 1 Green, (Power Good) 1 Red (Power ON), and 1 Blue (Spare). Orange and White available on request. Specify number of each color and Status color.

 

  • A lighted On/Off master switch provided. On/Off switch connection is 4.8mm standard spade connection. Select from two styles (Full Lighted Face and LED Dot) and four colors (Red, Yellow/Amber, Green, or Blue). See second image at left. You can use your own SPST latching switch lighted or unlighted instead of supplied switch. Message me for important information before ordering this product or your switch.

 

  • Can't ship until you message the LED colors and switch style and color that you want. Sample Order Message: Send the following with PSU Switch: LEDs = Yellow, Green, Red, and Blue. Switch = Full Face Red. Mailed USPS First Class Parcel from USA, usually same day. You will receive tracking number and expected delivery day when mailed. Reduced shipping fee if you order more than one.

 

All ATX PSU Remotes Control Models:

 

2) USB 2 Wire ON/OFF with USB power (Buyer Supplied Wire)

3) 2 Wire (Buyer Supplied Wire and Momentary Switch)

4) IR

5) 433 mhz RF

 

6) 315 mhz RF

 

Shipping Size

  • Size
    0 cm × 0 cm × 0 cm
  • Weight
    0 kg

There are no reviews to display.

×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.