Jump to content
Click or hover over image to zoom in

ATX Power Supply Bridge Jumper On/Off Switch Panel 1

(0 reviews)
29.95 USD
This item is based on a customization request to adapt a Racing Car Starter Panel to control an ATX Power Supply when not attached to a motherboard. Starter panel used: https://www.amazon.com/dp/B01LNYLQ4U  
Two 10mm bright LEDs show the PSU's status. Yellow LED indicates PSU is in standby mode. Yellow and Green LED indicate that the PSU is producing all voltages within ATX specs. Red LED in button indicates that PSU is powered on. Toggle switch can turn off status display LEDs. Button LED not affected by toggle switch.     
One eighth inch (1mm) thick aluminum panel is 2 1/2" (66mm) x 3 3/4" (95mm) with carbon color. It can stand alone as pictured or be enclosed. Screws provided. Toggle and button switch extend 3/4" (20mm) in front of panel. Depth behind panel including the 24 Pin connector is about 4" (110mm). Length of wires to connector can be increased. Message me with length that you want.  
Mailed USPS First Class Parcel from USA, usually same day. You will receive tracking number and expected delivery day when mailed.  
 
Switch Variations:
1) Red - SOLDERED
 
2) Blue - SOLDERED  
 
3) Full or DOT LED-Red,Yellow/Amber,Green, or Blue - Spade Crimped  
 
4) PSU Power Status LEDs - Spade Crimped
 
 


  • Pick a color

About ATX Power Supply Bridge Jumper On/Off Switch Panel 1

  • This item is based on a customization request to adapt a Racing Car Starter Panel to control an ATX Power Supply when not attached to a motherboard. Starter panel used: https://www.amazon.com/dp/B01LNYLQ4U

 

  • Two 10mm bright LEDs show the PSU's status. Yellow LED indicates PSU is in standby mode. Yellow and Green LED indicate that the PSU is producing all voltages within ATX specs. Red LED in button indicates that PSU is powered on. Toggle switch can turn off status display LEDs. Button LED not affected by toggle switch.

    

  • One eighth inch (1mm) thick aluminum panel is 2 1/2" (66mm) x 3 3/4" (95mm) with carbon color. It can stand alone as pictured or be enclosed. Screws provided. Toggle and button switch extend 3/4" (20mm) in front of panel. Depth behind panel including the 24 Pin connector is about 4" (110mm). Length of wires to connector can be increased. Message me with length that you want.

 

  • Mailed USPS First Class Parcel from USA, usually same day. You will receive tracking number and expected delivery day when mailed.

 

 

Switch Variations:

1) Red - SOLDERED

 

2) Blue - SOLDERED  

 

3) Full or DOT LED-Red,Yellow/Amber,Green, or Blue - Spade Crimped  

 

4) PSU Power Status LEDs - Spade Crimped

 

 

Shipping Size

  • Size
    0 cm × 6.6 cm × 9.5 cm
  • Weight
    0 kg

There are no reviews to display.

×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.