Search the Community

Hi all, I own an Alienware MX17 R4 (from 2012/2013 don't remember well) running with the official A12 bios and I am planning to change the discreet NVIDIA 675M because unfortunately it died. First and as I don't have so much money to spend on this, I am planning to change it by a 680M 4GO. Is this one a "good" choice ? Don't hesitate to propose me another GPU. Is the installation of a 680M 4GO will require a unlocked bios version ? (A11 unlocked ?). Do u know any website on which I can buy a 680M 4GO, I am really not a big fan of ebay... Thank you in advance.

Updated inf specific for Alienware M17x R4 - 880 GTX 384.76 - W10 64bit 1198 - SUBSYS 057B1028 Modded/updated Vbios highly Recommended Instructions (for Win 10 64bit): DDU have to be disabled (Windows Test Mode in right bottom corner) 1.: Download NVIDIA Driver package http://us.download.nvidia.com/Windows/384.76/384.76-notebook-win10-64bit-international-whql.exe Let it unpack and cancel installation 2.: Go to C:\NVIDIA\DisplayDriver\384.76\Win10_64\International\Display.Driver overwrite the supplied nvdmi.inf over the one in the folder. 3.: Run setup.exe and let it install the new driver. nvdmi.rar

Thanks to Joedirt recently for setting me up with a custom vBIOS for my ASUS ROG G750JM. I am having a little trouble figuring out how to adjust my voltage. Once the vBIOS is flashed the voltage is baked in so the slider does nothing. Joedirt took care of me plenty so I dont want to go hounding him for this advice and would rather ask the community. I can get the voltage to run at 0.987v or 1.193v one is not enough and the other is too much even with no OC it gets the GPU too hot too fast I would like to learn how to adjust the Voltage Table so that I can get 1.06-1.1v on my chip so I can OC and still not over heat. The stock vBIOS set it at 1.034v which I could OC my Memory +450mhz and my core +135mhz no problem. I would like to run at +280mhz or 1300mhz core and +395mhz Memory or 1450mhz Memory but that is not stable at 0.987v and gets to the 92c temp limit super fast with 1.193v. . .

I have Lenovo e540 with an EXP GDC Beast 8.4d and a GTX 660. The nvidia display driver crashes with a black screen for a few seconds when launching some games or when the egpu is used for a while, it sometimes will recover My external power supply is 350W and the card has a power consumption of 140W so I do not think this is a power issue. "Event 4101 Display driver nvlddmkm stopped responding and has successfully recovered." What I have tried: A GTS450 instead of the GTX 660. Setting the PCIe port to Gen 1 in egpu setup. Setting the PCIe port to Gen 2 in egpu setup. Setting the Nvidia power management to maximize performance in the Nvidia control panel. Going back to the driver version 327.23, I got a blue screen instead of a crash when using this version. Disabling HDMI audio in the Nvidia control panel. Any suggestions or advice on this issue? Thank you

Game Ready •Provides the optimal gaming experience for Tekken 7 and Star Trek Bridge Crew. Added or updated the following 3D Vision profiles: •Tekken 7 - Fair Changes and Fixed Issues in Version 382.33: •[TITAN X][3D Vision][Windows 10 Creator’s Update]: The Windows Store does notopen when 3D Vision is enabled. [1906805] •[GeForce GTX 1080Ti][Prey 2]: Stuttering occurs during gameplay. [1902201] •[GeForce GTX 1070][Windows 10 Creator’s Update]: In multi-display mode, extended monitors cannot be be put into sleep mode. [1916554] •[GeForce GTX 1060]: Blue-screen crash occurs pointing to driver (Nvlddmkm.sys) after the system reboots from sleep mode. [1814559] •[GeForce GTX 970][SLI]: SLI cannot be enable unless Norton 360 is disabled or Windows is booted in Safe Mode. [1919094] Software Module Versions •NView - 148.47 •HD Audio Driver - 1.3.34.26 •NVIDIA PhysX System Software - 9.17.0329 •GeForce Experience - 3.6.0.74 •CUDA - 8.0 Windows 10 64-bit 32-bit Windows 7 & 8.1 64-bit 32-bit

Specs: Windows 7 Lenovo w510 12 g ddr3 ram intel i7 Q720 @1.6ghz discreet card: Nvidia Quadro Fx 880M egpu setup: GTx 960 card hooked up via exp-gdc v8 dock via pci express card Using dell 220w psu (12v, 18Amp) Using an external monitor hooked to 960 via hdmi The Problem: Drivers successfully installed, device manager shows GTX 960 and shows it functioning properly. However, no external monitor can be detected. Aditionally, when installing the 960 drivers, it broke the 880M (shows up as error code 43 in device manager iirc). So currently I'm stuck with crappy display on the internal monitor (internal graphics? even though I don't have intel integrated graphics..) and no external monitor detected. I read in the FAQ section that trying to get a dgpu and egpu from nvidia to work is about getting them to run on the same drivers, but it was not clear at all about how to go about doing that. Plus the cards are so far apart in age I'm not sure how to even begin to go about trying to find a drive that will run both. What I have done so far: Disabled pci power managment, this allowed the egpu to be sucessfully detected. Showed up in device manager as "generic vga device" or something like that. Downloaded and installed appropriate nvidia drivers for 960, restarted computer. Computer running on crappy internal(?) graphics card (cant even display full screen resolution) , error for dgpu in device manager (error only goes away after uninstalling 960 drivers and reinstalling dgpu drivers), 960 shown as working fine. Disabled dgpu in device manager (I don't have the option to in the bios for some strange reason, screen shot attached), restarted. Upon restart device manager shows 960 working fine, however, no external monitor detected and computer internal dsiplay still running on crappy internal(?) graphics card (cant even display full screen resolution). Any help would be much appreciated. I feel like I should be pretty close since the egpu was detected and is shown as running ok in the device manager...

Game Ready •Provides the optimal gaming experience for Prey, Battlezone, and the Gears of War 4 Multi-GPU Update. Added or updated the following SLI profiles: •Sniper: Ghost Warrior 3 •Warhammer 40,000: Dawn of War III Added or updated the following 3DV profiles: •Warhammer 40,000: Dawn of War III - Not recommended Changes and Fixed Issues in Version 382.05 •[SLI][No Man’s Sky - with The Foundation Update 1.10 patch]: With SLI enabled, there is texture corruption in the game. [200257478] •[SLI][GeForce GTX 670][World of Tanks]: In SLI mode, blue-screen crash occurs when pressing Alt+Tab during the game. [1895732]] •[GeForce GTX 1080 Ti][Gears of War]: After the bootup movies, blue-screen crash occurs pointing to nvlddmkm.sys. [1914184] •The NVIDIA Control Panel in the Windows desktop context menu, as well as the NVIDIA system tray icon, may be absent. [200298863/1906498] •System may hang at a black screen upon cold boot up. [1913854] •In a multi-display configuration, the extended displays are unable to enter sleep mode. [1902053] Software Module Versions •NView - 148.47 •HD Audio Driver - 1.3.34.26 •NVIDIA PhysX System Software - 9.17.0329 •GeForce Experience - 3.5.0.70 •CUDA - 8.0 Windows 10 64-bit 32-bit Windows 7 & 8.1 64-bit 32-bit

Well, after my ZBook died because of faulty bios (hardware related) and it had a K4100M (OC) with HP vBios, i wanted it to be on my old 8770w, but it just gave me no screen output (laptop screen) only on VGA (didn't test on DP cuz i got no DP Monitor nor cable) and i liked how the K4100M had better performance than the K4000M (Well the oc made the bandwidth go from the original 102 GB/s, to 200 GB/s [Not stable at all in some games like Rust, or Heavy iray rendering] vs the K4000M 89 GB/s [BTW I couldn't find any SAFE way to oc it] So I decided to make some research and testing,, Long ago before I started searching on how to do this change of gpu i found out that people had 980m in their 8770w and also k5100m without any errors, just by modifying the drivers, i tried so and failed. This is my laptop Specs: HP EliteBook 8770w Quadro K4000M Intel i7 3820mq 2x500GB WD Blue (Only ones i had around empty in my inventory) 20GB of ram (I know its not "correct" but i used 3x4GB and 1x8GB RAM sticks) 1080p Screen Non-Dreamcolor Windows 10 Pro 64 Bits - Creators Update (Btw im in Insider Program) Notes: This laptop has no Optimus support as far as i know, I havent tested on more vbios, only on 1 OC Dell Vbios I didnt test video output on DP, Beacuse i have no DP Monitor nor a cable, and i dont need it, at all. The laptop didnt give any video on integrated screen, only on vga with OC HP vbios and aswell Original (Backed up) vbios, only with the Dell vbios made successful output to laptop screen. There was video going on at VGA without nvidia drivers, if i installed the drivers the screen had artifacts like random colors then the laptop freezes and shutdowns with errors, even with dell vbios. GPU temp was higher than usual, even when it wasn't on high load. I was able to run Besiege at 5 fps without a driver (Only with Microsoft Display adapter). So by some hours of testing this were the results: I replaced the K4000M with the K4100M, I used windows recovery thing at startup (since the nVidia drivers from K4000M bugged the hell out the screen output) then I selected the CMD option, did cd to the folder where i had nvflash, flashed my gpu from there, with a OCed DELL vbios, (link), and then restarted my laptop, I was so excited because i made it make video output through the laptop screen, and then i loaded windows normally and the drivers started to bug the screen and then windows crashed after 4m every time i logged to windows (even without logging in), it said Video tcp failure (or something) and Watchdog_DPC_violation, So i used a fresh windows install (from a HDD i had around), it did give 1080p video output to laptop screen and i didnt test anything at all, so then installed Normal Nvidia drivers (from nvidia not hp neither dell) and then it started to bug again, And well, Then i tried using Ubuntu (17) and the screen give 1080p output without problems, i was going to install nvidia drivers but it was too difficult for the short time i had to test, so i didn't finished up testing with Ubuntu, As some dude told me at other forums that it might be an Optimus driver bug or something, so later on ill try testing with modified drivers. Also the GPU temp was high, i didn't check out the temp, but the laptop was too hot for normal use and used too much battery life (i found out when i was playing around with Ubuntu at my couch). And months before, I found out that in Nvidia page it said that the K4100M worked only on Haswell Generation (4th gen), and not Ivy Bridge, now it says that supports Shark Bay, which is kinda new, since that "option" wasn't there before. This is what ill do next time i make another test: I'll use another vbios a not OC one, just a normal one, Modify nVidia Drivers to try removing optimus (if posible) Finish testing up in Ubuntu Try to use older Drivers to see if anything happens. Post the pics of the Artifacts and a video of besiege running with Default video Driver

Hi all, I have a macbook pro 15 inch retina mid-2015. I joined a Aikitio thunder2 with a graphics card GTX 1070 but there are problems with the internal monitor of my macbook. first of all we will list the specific to this topic. my macbook is equipped with two graphics cards, an integrated and a dedicated, integrated is an intel iris pro graphics while one dedicated is an amd radeon r9 m370x 2 GB gddr5, and obviously the eGPU GTX 1070. the problem is that with the external monitor connected via hdmi to egpu doesn't show any problem while using the internal monitor that should take the video signal from the thunderbolt has lagged. Mafia 3 with settings on external monitor turn 54 fps while on internal monitor turn 9 fps!!! i have windows 10 on bootcamp. There is not much difference and it occurs to me that the problem is the thunderbolt. members of tech hell please help me!

Hi all, I have a macbook pro 15 inch retina mid-2015. I joined a Aikitio thunder2 with a graphics card GTX 1070 but there are problems with the internal monitor of my macbook. first of all we will list the specific to this topic. my macbook is equipped with two graphics cards, an integrated and a dedicated, integrated is an intel iris pro graphics while one dedicated is an amd radeon r9 m370x 2 GB gddr5, and obviously the eGPU GTX 1070. the problem is that with the external monitor connected via hdmi to egpu doesn't show any problem while using the internal monitor that should take the video signal from the thunderbolt has lagged. Mafia 3 with settings on external monitor turn 54 fps while on internal monitor turn 9 fps!!! There is not much difference and it occurs to me that the problem is the thunderbolt. members of tech inferno please help me!

Game Ready •Provides the optimal gaming experience for Warhammer 40,000: Dawn of War III, Heroes of the Storm 2.0, Batman: Arkham VR, Rick and Morty: Virtual Rick-ality, and Wilson's Heart. Changes and Fixed Issues in Version 381.89 •[Sniper Elite 3]: The game crashes. [1880113] •[Notebook][eDP panel]: Blue-screen (code 3B) occurs followed by the Recovery screen during software unbundling process. [1900432] •[GeForce GTX 1060]: Blue-screen crash occurs pointing to driver (Nvlddmkm.sys) after the system reboots from sleep mode. [1814559] •GPU idling voltage has increased. [1904229] Open Issues in Version 381.89 WHQL Windows 10 Issues: •[GeForce Experience]: Driver installation may fail when attempting to perform a driver overinstall. To workaround, perform a clean installation. •[SLI][GeForce GTX 1080][Battlefield 1 XP1]: With SLI enabled, corruption appears in the game when switching between full-screen and windowed mode. [1889162] •[GeForce GTX 1080 Ti][Mass Effect: Andromeda]: Random memory errors may occur when playing the game. [1887520] •[GeForce GTX 1080 Ti][Sid Meirie's Civilization VI][G-Sync/SLI/DirectX 12]: Black corruption appears while entering the in-game menu after skipping the cutscene.[200283322] •[GeForce GTX Titan X][Ansel][Ghost Recon Wild lands]: With FXAA enabled from the NVIDIA Control Panel, the application crashes when enabling the in-game Ansel UI.[200283194] •Error code 43 appears in the Device Manager after installing the driver with HDMI display connected. [200283276] •[Pascal][Notebook]: The display remains blank while over installing the driver, requiring a reboot. [200273603] •[GM204, Tom Clancy's The Division Survival DLC] Game crashes, pointing to ntdll.dll when changed to full-screen and to windowed full-screen. [200252894] •[GM204, ShadowPlay] For Honor silently may crash if the intro video is skipped while instant replay is on. [200247313] •[SLI] [GeForce GTX 970M] Level loading may hang in Gears of War 4. [1826307] •[367.77, WDDM 2.1] Driver install/overinstall requires a reboot. [1757931] •[SLI, GP104] Installer prompts for a reboot during express overinstall of 372.69 driver on 372.54. [200231806] •[GM204] Quantum Break window either remains blank or freezes in game scene in windowed mode. [1804910] •Surround Display icon disappears after rotate mode is set to portrait. [200201040] •[SLI] Street Fighter V performance drop (pause and play) observed when the game is played at 4K resolution with SLI enabled. [200172046] •[Luxmark 3.0] Display driver stopped responding while running benchmark LuxBall HDR (Simple Bechmark:217K triangles). [200153736] •[347.09, GM204] Blank screen observed on an ASUS Tiled display when system resumes from shutdown or hibernation with Fast boot option enabled from BIOS.[1591053] Windows 8.1/Windows 8 Issues: •[3DVision] While a stereoscopic 3D video with stereoscopic 3D enabled is played, the monitor refresh rate switches to 60 Hz after changing the resolution using the Windows control panel. [1314811] •[Video, Notebook] The NVIDIA Control Panel video color settings have no effect on YouTube flash video playback within Internet Explorer 10. [999485] Windows 7 Issues: •[GeForce GTX 1080] Battlefield 1 hangs when campaign loaded with Fast Sync enabled from the NVIDIA Control Panel. [200254350] •[SLI] Street Fighter V performance drop (pause and play) observed when the game is played at 4K resolution with SLI enabled. [200172046] •[3DVision] While a stereoscopic 3D video with stereoscopic 3D enabled is played, the monitor refresh rate switches to 60 Hz after changing the resolution using the Windows control panel. [1314811] Software Module Versions: •NView - 148.47 •HD Audio Driver - 1.3.34.26 •NVIDIA PhysX System Software - 9.17.0329 •GeForce Experience - 3.5.0.70 •CUDA - 8.0 Windows 10 64-bit 32-bit Windows 7 & 8.1 64-bit 32-bit

Hi All, We can Unlock the last bios and vbios for ovc the gtx950m of Asus N552VX ? would nice! Specification Notebook Backup bios with afuwinx64 Thanks in Advance If i try to get a backup bios of gtx950M i get this error: (c) 2017 Microsoft Corporation. Tutti i diritti sono riservati. C:\WINDOWS\system32>cd C:\Users\Stefano\Desktop\NVFlash_Certs_Bypassed_v5.287_x64 C:\Users\Stefano\Desktop\NVFlash_Certs_Bypassed_v5.287_x64>nvflash -b backupbios.rom NVIDIA Firmware Update Utility (Version 5.287.0) Modified Version By Joe Dirt Adapter: GeForce GTX 950M (10DE,139A,1043,1C9D) H:--:NRM S:00,B:01,D:00,F:00 WARNING: Debug port will be disabled during EEPROM access. The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device. Command failed to complete mailbox0 = FFFFFFFF Command id:000A Command: NV_UCODE_CMD_COMMAND_PREP failed Command Status:NV_UCODE_CMD_STS_NONE Error: NV_UCODE_ERR_CODE_CMD_TIMEOUT Identifying EEPROM... Command failed to complete mailbox0 = FFFFFFFF Command id:0002 Command: NV_UCODE_CMD_COMMAND_EID failed Command Status:NV_UCODE_CMD_STS_NONE Error: NV_UCODE_ERR_CODE_CMD_TIMEOUT ERROR: Error: Display adapter's EEPROM ID process failed C:\Users\Stefano\Desktop\NVFlash_Certs_Bypassed_v5.287_x64>

Game Ready •Provides the optimal gaming experience for Quake Champions Closed Beta. New Product Support •Added support for the NVIDIA TITAN Xp New Features: •Added support for Windows 10 Creators Update. •Added DTS X and Dolby Atmos support for 5.1.2 speaker configuration. •Added Dolby Vision support for games. •Added NVIDIA®Ansel TM support for Snake Pass and Kona. NVIDIA Control Panel: •Display page: Added the option to override the Windows 10 control of desktop color settings. •Manage 3D Settings page: Added option to disable self-refresh power-saving feature for G-Sync.** **Applies to self-refresh capable notebooks using Pascal-based GPUs with G-Sync enabled. Added or updated the following SLI profiles: •Descent: Underground - updated Changes and Fixed Issues in Version 381.65: •[XSplit][DirectX 12 games such as Rise of the Tomb Raider]: Games experience poor performance.[1882697] •[GeForce GTX TITAN X][SLI][Battlefield 1- XP1 Update]: Shimmering occurs on grass and trees with SLI and in-game TAA enabled. [200289721] •[GeForce GTX 1070][Serious Sam HD]: Heavy flickering occurs in the game with V-sync enabled. [1881405] •[GeForce GTX 980 Ti]: The GPU occasionally gets stuck in a low power state after pressing Alt-Tab while playing a game.[1832415] Software Module Versions •NView - 148.47 •HD Audio Driver - 1.3.34.26 •NVIDIA PhysX System Software - 9.17.0329 •GeForce Experience - 3.4.0.70 •CUDA - 8.0 Windows 10 64-bit 32-bit Windows 7 & 8.1 64-bit 32-bit

Hi I'm wondering if it would be possible if i tore out the wifi adapter out of the zenbook flip and then get mpcie to pcie riser and do an egpu setup with a 960. Would this work well? I currently own the psu and gpu. I'm just wondering if it's feasible. Also if there is a better recommendation for a 500-600 ultra book I'm open. I will be taking this for school work and then I come home plug it in do some casual gaming.

Game Ready •Provides the optimal gaming experience for Mass Effect: Andromeda and Rock Band VR. New Features •Added support for Dolby Vision for games. Application SLI Profiles: •Dead Rising 4 - updated •Deus Ex: Breach - updated •Mass Effect: Andromeda - added SLI profile 3D Vision Profiles: •Halo Wars 2 - Not recommended 3D Compatibility Mode Profiles: •These games must be run in DirectX 10/11 mode to see improvements and are not compatible with 3D Vision Surround mode. Compatibility mode profiles: •Dreadnought - Excellent Open Issues in Version 378.92 WHQL Windows 10 Issues: •[GeForce Experience]: Driver installation fails when attempting to perform a driver overinstall. To workaround, perform a clean installation. •[SLI][GeForce GTX 1080][Battlefield 1 XP1]: With SLI enabled, corruption appears in the game when switching between full-screen and windowed mode.[1889162] •[GeForce GTX 1080 Ti][Mass Effect: Andromeda]: Random memory errors occur when playing the game.[1887520] •[GeForce GTX 1080 Ti][Sid Meirie's Civilization VI][G-Sync/SLI/DirectX 12]: Black corruption appears while entering the in-game menu afte skippingthe cutscene.[200283322] •[GeForce GTX Titan X][Ansel][Ghost Recon Wild lands]: With FXAA enabled from the NVIDIA Control Panel, the application crashes when enabling the in-game Ansel UI.[200283194] •Error code 43 appears in the Device Manager after installing the driver with HDMI display connected. [200283276] •[Pascal][Notebook]: The display remains blank while over installing the driver, requiring a reboot. [200273603] •[GM204, Tom Clancy's The Division Survival DLC] Game crashes pointing to ntdll.dll when changed to full-screen and to windowed full-screen. [200252894] •[GM204, ShadowPlay] For Honor silently crashes if intro video is skipped and instant replay is on. [200247313] •[SLI] [GeForce GTX 970M] Level loading hangs in Gears of War 4. [1826307] •[367.77, WDDM 2.1] Driver install/overinstall requires reboot. [1757931] •[SLI, GP104] Installer prompts for reboot during express overinstall of 372.69 driver on 372.54. [200231806] •[GM204] Quantum Break window either remains blank or freezes in game scene in windowed mode. [1804910] •Surround Display icon disappears after rotate mode set to portrait. [200201040] •[SLI] Street Fighter V performance drop (pause and play) observed when the game is played at 4K resolution with SLI enabled. [200172046] •[Luxmark 3.0] Display driver stopped responding while running benchmark LuxBall HDR (Simple Bechmark:217K triangles). [200153736] •[347.09, GM204] Blank screen observed on an ASUS Tiled display when system resumes from shutdown or hibernation with Fast boot option enabled from BIOS. [1591053] Windows 8.1/Windows 8 Issues: •[3DVision] While a stereoscopic 3D video with stereoscopic 3D enabled is played, the monitor refresh rate switches to 60 Hz after changing the resolution using the Windows control panel. [1314811] •[Video, Notebook] The NVIDIA Control Panel video color settings have no effect on YouTube flash video playback within Internet Explorer 10. [999485] Windows 7 Issues: •[GeForce GTX 1080] Battlefield 1 hangs when campaign loaded with Fast Sync enabled from the NVIDIA Control Panel. [200254350] •[SLI] Street Fighter V performance drop (pause and play) observed when the game is played at 4K resolution with SLI enabled. [200172046] •[3DVision] While a stereoscopic 3D video with stereoscopic 3D enabled is played, the monitor refresh rate switches to 60 Hz after changing the resolution using the Windows control panel. [1314811] Software Module Versions: •NView - 148.47 •HD Audio Driver - 1.3.34.23 •NVIDIA PhysX System Software - 9.16.0318 •GeForce Experience - 3.4.0.70 •CUDA - 8.0 Windows 10 64-bit 32-bit Windows 7 & 8.1 64-bit 32-bit

Got a Alienware 17 R3 with GTX 970 M. Trying to overclock the GPU and need to download a VBIOS. Tried to download the file: Nvidia GTX 970m - 'OC edition' rev0.zip 1.0.0 from techinferno site but it would not let me. Can anyone point out a site that can get me going? Thx

Hello guys! So my setup works finally, but with on major flaw: whenever I want to get into "gaming mode" - meaning using the eGPU, my only working solution and method is 100% working, however takes ages - Without egpu, boot to windows, uninstall all nVidia drivers Reboot to macOS, turn on egpu, wait around 10 sec, plug it in, run the automate-egpu.sh script, then again in -a mode turn off mac, shutdown egpu, wait until there's no green light, unplug. plug the thunderbolt cable back in, boot to windows without egpu connected, open device manager, turn on egpu, after 10 sec hotplug, see it gets recognized, re-install drivers. turn off mac, shutdown egpu, wait until there's no green light, unplug. plug in the egpu, boot to boot selection, after the cursor is move-able, power on the egpu, boot to windows (if it would freeze w/ black screen or infinite spinning wheel, force shutdown and do step 6. again) after getting to Windows, voila, it's alive. Additional 8th step - whenever I turn off my laptop, I have to re-do everything. +1 : I always use the closest thunderbolt port to the magsafe port. So the question is, did anyone found out a way of booting 100% succesfully without having to reinstall the geforce driver all the time? I mean since my macbook is the most problematic one, even I have a gtx 10x0 series, I should be happy of this method working at least, I'd still love to fasten up the process. ps.: I'm thinking about a solution, what would somehow reset all the caches/temp files of the driver itself when shutting down everything, if there would be a way for doing that, I would try it right away, and post an update. Would it help at all, or should I just keep reinstalling everytime? Thanks, Samu

Hi all, As anyone using nVidia cards with OSX will know, we're limited to the 900 series cards, whether they be in eGPU's, Mac Pro or Hackintosh. Of course there is the AMD option for cards, but they simply don't meet up to any expectation I have of a card comparable to nVidia's hardware. All of my diggings has shown people saying to wait for nVidia to release webdrivers for OSX and that's going back nearly 8 months now. Honestly, I severely dislike Windows as an operating platform, and have miles of trouble getting my eGPU to work with it on my MacBook Pro. But, in lieu of Pascal support for the newer 1000 series cards, I WILL eventually switch over. I know lobbying to Apple is a dead cause, because, well, it's Apple, but I've started a petition to try and gather support for convincing nVidia to write webdrivers for 1000 series cards for OSX. So, sign and share this around, I know it's a long shot but hey, a digital signature costs you nothing. Thanks. http://www.ipetitions.com/petition/pascal-support-for-osx

Game Ready • Provides the optimal gaming experience for Tom Clancy's Ghost Recon Wildlands. Gaming Technology • Includes DirectX 12 optimizations which provide additional performance increases for a variety of titles. New Features • Added support for the GeForce GTX 1080 Ti Added or updated the following SLI profiles: • Deus Ex: Mankind Divided • Titanfall 2 • Tom Clancy's The Division Added or updated the following 3DV profiles: • Ghost Recon: Wildlands - Good 3D Compatibility Mode Profiles: • No compatibility mode profiles were added with this version. Changes and Fixed Issues in Version 378.78 • [Discord]: The GFE FPS counter appears in the application. [200281089] • [GeForce 1050 Ti][Notebook]: Blue-screen crash occurs on some notebook platforms. [1877803] • [GeForce GTX 980 Ti][PhysX]: PhysX usesthe CPU when Optimize for Compute Performance setting is OFF, resulting in a drop in performance. [1871405] • [GeForce GTX 980][CUDA]: Driver error occurs when trying to compute with GPUGrid CUDA application.[1869402] • [GeForce GTX 980 Ti][OpenCL]: Driver error occurs when trying to compute PrimeGrid Genefer OpenCL tool. [1867576] • [NVENC][Steam]: NvFBC H.264 encode crashes. [1867544] Software Module Versions • NView - 148.47 • HD Audio Driver - 1.3.34.23 • NVIDIA PhysX System Software - 9.16.0318 • GeForce Experience - 3.4.0.70 • CUDA - 8.0 Windows 10 64-bit 32-bit Windows 7 & 8.1 64-bit 32-bit

I am currently using gtx 1060 3gb with mpcie and no hotplug (or something with that name) setup due to locked bios. I am tired of using old graphic driver as it seems to be not giving the best frames for new titles and my windows constantly trying to update my driver via windows update. even if i turn it manually, it constantly brings problem. I heard this isn't the case for AMD, but which one is better for mpcie gpu setup without hotplug capability?

Game Ready •Provides the optimal gaming experience for Sniper Elite 4, For Honor, and Halo Wars 2. New Features: Video SDK 8.0 •High-bit-depth (10/12-bit) decoding (VP9/HEVC) •OpenGL input surface support for encoder •Weighted Prediction •H.264 ME-only mode enhancements Application SLI Profiles: •No SLI profiles were added with this version. Added or updated the following 3DV profiles: •Sniper elite 4 - Not recommended 3D Compatibility Mode Profiles: •Sniper Elite 4 - Excellent •For Honor - Excellent Changes and Fixed Issues in Version 378.66: •[Surround]: Surround cannot be enabled on the XGPU. [200236703] •[G-Sync]: With G-Sync and V-Sync both enabled, there is a long delay when switching a game from full-screen mode to windowed mode.[1867557] •[Second Life 64-bit]: World view is tinted blue after disabling Advanced Lighting Model. [200274562] •[The Division]: Shadows flicker after enabling PCSS. [1867573] •[Kepler GPUs][Battlefield 1]: There is flickering in the game when using TAA. [1865681] •[SLI][Battlefield Day28 Patch]: The menu text becomes jittery with SLI is enabled. [1837721] •[SLI][Surround][GeForce GTX 1080]: The system crashes when launching games in SLI Surround using HDMI 2.0 connections. [1834142] •[GeForce GTX 1080][Heroes of Storm]: The game crashes when launched. [200274793] •[GeForce 860M][Notebook]: Direct X games crash. [1868454] •[Minecraft]: Java SE Binary crashes pointing to nvinitx.dll. [200274582] •[GeForce GTX 980 Ti]: The driver is unable to detect multiple TV models. [1788948] Software Module Versions •NView - 148.47 •HD Audio Driver - 1.3.34.21 •PhysX System Software - 9.16.0318 •GeForce Experience - 3.1.2.31 •CUDA - 8.0 Windows 10 64-bit 32-bit Windows 7 & 8.1 64-bit 32-bit

Hi guys, I succesfully flashed v2 vbios from prema and I tried 1v and and oc but I couldnt. I think it was power suply. Mine is 230w. And I tried 0.75 0.50 0.25 and 0 volt. But now I m trying game, benchmark screen goes dark and after beeping at 0 volt. Is this a hardware damage? I used just 1v max.(temperature max 70c) I tried cmos reset DDU Xtu uninstall And come back to stock vbios I think my card is dying Please help me!

Game Ready •Provides the optimal gaming experience for Resident Evil 7 Biohazard, Conan Exiles early access, and the For Honor closed beta. Added support for the following products: •GeForce GTX 1050 notebook •GeForce GTX 1050 Ti notebook Added or updated the following SLI profiles: •Battlefield 1 •Deus Ex: Breach Standalone - added DirectX 11 profile •Diablo III - added DirectX 11 profile •Dreadnought(2016) - added DirectX 11 profile •LEGO: Minifigures Online - added SLI-Single profile •Sid Meier's Civilization VI •Shooter Game (HDR) - added DirectX 11 profile •Sniper Elite 4 - added DirectX 11 profile •Space Hulk: DeathWing - added SLI-Single profile •Tom Clancy's Ghost Recon: Wildlands •Watch Dogs 2 3D Vision Profiles: •Resident Evil 7 - not recommended •Conan Exiles - not recommended 3D Compatibility Mode Profiles: •Watch Dogs 2 - excellent Windows 10 Fixed Issues: •[GeForce TITAN X][Just Cause 3] Randomflashes occur in the game. [1846802] •[GeForce GTX 1080][Wargames: Red Dragon]: The system reboots after switching to full-screen mode while playing the game. [1838863] •[GeForce GTX1080]: Random TDR/black screens occur when running GPU-intensive Direct X applications after updating to Windows 10 Anniversary Update. [1811614] •[GeForce GTX 1070][Alienware Graphics Amplifier] The graphics card is not detected upon installing the driver. [200236450] •[GeForce GTX 1070][Battlefield 1] Rain puddles appear dark. [1853262] •[GeForce GTX 1060] A superfluous audio end point entry appears in the Windows Sound Devices panel after resuming from hibernate mode. [200253633] •[Assassins Creed - Syndicate shows intermittent flickering black or white patches on game character faces. [200211264] •[SLI][Battlefield 1]: Texture flickering occurs in the game with SLI enabled. [200252872] •[Hitman pro][DirectX 12] Flickering corruption appears in the game if the multi-GPU option is enabled from the in-game settings. [200252498] •[Folding @ Home] Work unit errors occur. [200262613/1831430] •[Diablo 3 DirectX 11] SLI profile needed. [1859126] Software Module Versions •NView - 148.47 •HD Audio Driver - 1.3.34.21 •NVIDIA PhysX System Software - 9.16.0318 •CUDA - 8.0 Windows 10 64-bit 32-bit Windows 7 & 8.1 64-bit 32-bit

No issue up to now, everything is stable, easy and cheap setup. However, Nvidia Optimus isn't working with latest Nvidia drivers. Hardware: - Mac mini Late 2012 (MD387LL/A) / Macbook Pro Retina Late 2013 (ME293LL/A) - Akitio Thunder2 - Zotac GTX1050Ti - Samsung T3 Portable SSD - 250GB (for Windows To Go) - DC 12V/12.5A from Aliexpress Setup: - Install Windows 10 as Windows To Go with Rufus; - Install Bootcamp; - Reboot to Windows with Akitio connected and install latest Nvidia Driver; System Start: - Connect External SSD with Windows To Go to your Mac; - Power up and hold down ALT keyboard; - Connect Akitio and wait 2-4 minutes; - Choose Windows from boot menu; sorry guys, I can't attach files here, every times it gives me an error. I uploaded images and benchmarks to my google drive here

Hi i have an msi ge 60 2pc and i am trying to install egpu exp v8 the gtx 1060 zotac 3gb, but i have the error 43 . haw i can resolve this ? , with the 650ti no problem , plz need help