raven_ninety

yes, it didn't work

I've used Universal BIOS Backup Toolkit v2.0 but its says after the warning the read button is disabled unless I checked Custom then set a size Is it safe to backup the bios just by checking Custom and setting the size to 8mb (same size of bios, I downloaded from msi)? If yes here it is after pressing Read then Backup msige602pebiosbackup If this is wrong is there a guide on how to backup the bios of msi ge60 2pe apche pro?

How can I backup my system bios or is this the one below? This is the file I downloaded from MSI E16GFIMS.521

Where can I get a custom vbios?

Is there a modded bios for MSI GE60 2PE so that I can undervolt the GTX860M?

Any ideas on how to set the fan speed to 100%? Fan settings in the bios doesn't work for me.

I bought an AC-DC 12v 500ma adapter for the fan, and if the 3000rpm fan is run less than the max speed, it will produce even more annoying noise I'm planning on buying a smaller fan for this to see if there's a big difference in temperature. I have also tried placing the fan under the laptop, not much difference in temps..

Yes same direction, it's quite effective, only problem is the noise. I think the unit's fan is not enough to take away the heat from the heatsink..adding an exhaust fan helps a lot. The heatsink is cool to touch now

I've just put a 120mm 38mm thick 3000rpm fan near the exhaust and it lowered my cpu temps by atleast 10c, this stops the cpu throttling and I can now play games at i7 3630qm@turbo speed(using throttlestop)/ gt650m@1080/1250mhz.

@octiceps - Do you think it's possible to disable the GPU0 and just use GPU1(ultrabay) as the main gpu? I think this will lower the CPU temps/

Is there a way to set the fan to always run at 100%? I've tried speedfan but it can't even detect the y400's fan.

@octicep - That's why I'm thinking of putting some ramsinks on top of the heatpipes, do you think it will lower the temps on the cpu? my cpu temps reaches 100c in less the 30s running prime95 then throttles down to 1.2ghz. btw I have the Y400 model.

Is there a bios setting that will set the fan speed to 100% all the time, can't find the setting on the modded 2.02 bios?

I have succesfully flashed my ideapad y400 v1.02 bios to modded v2.02. Thanks guys! --- just tried increasing the refresh rate to 120hz in nvidia control panel and it works! my desktop is much more smoother now.

So it is not safe to update to modded v1.03 bios from a v1.02 bios. I've PM you my Y400 BIOS 6BCN30WW(v1.02, but can I disable hyperthreading once a flashed to a modded bios? Does it lower the temps?