flinte

Hi svl7, where can i find the Downloads for your unlocked BIOS Version? at your first post i can only find the A03. but in the past i've already download the unlocked A11. thanks in advance and i would buy you a beer PS: actually i'm looking for unlocked A14

Hi, I found many guides (like above) and I'm exactly proceed with these guides: I used original A03 Bios i extract the .exe and rename the .fd to M14R2.hdr i Format an usb drive to fat32 (not bootable) and copy the M14R2.hdr to the root of usb stick i remove the Main Battery and disconnect AC-Adapter i put the stick in the USB2 port located on left side, hold END-key and connect the AC-Adapter - the Notebook turned on, FAN is high spinning and all FX Leds are on, PWR Btn is Fading red-green-blue-white - after ~10 sec. the System start continues beeping for 2-3 Minutes - but than, the Notebook stay powered on and nothing happens, no Screen, no beeps, no automated reboot - i leave it alone for 60 minutes, but still the same - power off per power btn did not work, only remove AC can powered off the Notebook - after reconnect AC, the Notebook stay in no power state, cant be turned on, no error beep codes, no leds - i Strip down the complete System, remove coin cell but no help, System cant powered on i brick 2 Mainboards with this guide. the 3rd will be delivered tomorrow. what Im doing wrong? I cant understand it. on the 2nd try, I used another known good USB stick and the original A04 File. Both Mainboards are stock with A11 BIOS.

I'm running a PM830 MSATA 128GB and WD 500GB 7.200RPM. I put all "user data", System temp and IE Temp Folders on the 500GB HDD. Disabled Auto defrag, prefetch and superprefetcher function. on SSD are only installed: OS and Programs on HDD are installed: Games, MP3, TMP, downloads, user data and a backup Image from SSD so i got a fast and stable System and the lifetime of my SSD will be much longer. M14xR2

respect, Great work! cant wait for my new M14xR2 to proceed it, too. UPS means, delivery tomorrow. what do think about cutting out a Little part (15mm) of the Fan. so a part of the airflow can stream over the PCB and heatsink. i believe it will be help for cooldown Phase. cheers Flinte

thank you. I don't want to Play with the M14x in Battery mode. only for the case of a little longer Work during a travel. with my old Dell D430 I could increase the running time by slow down the CPU clock and CPU voltage from 3h to 4h. of course for gaming and max Performance it is better to run AC powered with a gently touch of OC

be sure, to tighten the screws of heatsink and fan only "over cross" not Clockwise or vice versa. dont bent the fan during assambly it will damage youre bearing. check allignment of bottom base and Mainboard, loose all screws of Mainboard a little bit, slightly move the Mainboard and also tighten the screws "over cross". I apologize for my bad english.

did anyone has experience in undervolting with stock clock? Battery runtime and temperatures?