Klem

Whats chips use G.Skill in your memory moduls?

Mr. Fox 2133 10-10-10-27 (all other timings is stock), but it not stable. And of course all memory controllers in CPU is different. Ability work with high frequency and agressive timings may be very different even for two identical CPUs.

J95 "Stolichnaya...? I prefer Polish fist half, clocks and timings fully programmable." You mistake. You dont understand, i and Khenglish speak about Samsung modules! Of course Corsair`s SPD all programable, but Samsung after 2011 year not. And not only Samsung, but and Hynix, Nanya and some others.

First half of SPD of course no! We cant write JEDEC. Because it is Samsung (you know when they started to set protection)! But second half SPD of course programmable and we can write XMP1 and XMP2 profile. And of course, as you know, we can set frequency and timings in bios, in Custom profile.

This is original Samsung memory moduls with the same chips and they work exactly the same as Corsair Vengeance 2133.

Great. But very much depending from quality of memory controller in CPU!

Do not worry. Just flash this vbios from MSI 560M, and all must work. MSI GTX 560M 1536 MB BIOS.zip

Corsair Vengeance 2133 CL11 memory 32GB (4x8GB) CR1! Corsair Vengeance 2133 CL10 memory 32GB (4x8GB) CR1!

You can set RAS from 31 to 27.

Show your other timings in bios (not in XTU). And benchmark Aida64, cash and memory.

TM5 link: http://testmem.tz.ru/tm5.rar

Samsung K4B2G0846D can very stability work on 1866 MHz with timings 9-9-9-15 and with voltage 1,5V. I tryed much times. But on modern platforms timings are much less important than the frequency.

Of course MSI GT70 0ND have MXM slot for video card.

Well, try as you wrote. Your main mistake before: timing RC = 0. And for quick testing of stability with new timing configuration you can use very nice program TM5.

Mr. Fox Set timings: CL 10 RCD 11 RP 11 RAS 24 WR 10 RFC 120 RRD 5 WTR 6 RTP 6 RC 15 FAW 25 And memory voltage 1,5V.

Yes that right. Corsair just overclock his memory, just writed overclocked frequency and timings in SPD. And it work nice, without any problems. G Skill and Kingston did the same.

Or you can try flash vbios from MSI GTX 765M.

You lucky. You have Kingston HyperX PnP 2133 CL12 with chips Samsung K4B2G0846D HYK0. It is the best chips in the world! Never 2x8 Corsair Vengeance 2133 CL11 will not win them (if you overclock your Kingston HyperX). Because Corsair Vengeance 2133 CL11 have chips Samsung K4B4G0846Q HYK0. In laptops max for this chips 2133 MHz with timings 10-11-11-27. But you can now overclock your Kingston HyperX PnP 2133 CL12 with chips Samsung K4B2G0846D HYK0 to 2133MHz with timings 9-10-10-24, or if not work 10-11-11-24. Just set in bios setup from "Default DIMM Profile" to "Custom Profile" and set correct timings.

2x4Gb Samsung M471B5273DH0 in MSI GE60 0NC laptop.

You right. Only single rank, and that explains the speed loss. Samsung low voltage chips Samsung B-Die SDRAM package is SEC 340 K4B4G0846B HYK0.

You can try to use another Clevo vbios from first page of this thread. For example Clevo 1,025V or Clevo 1,050V.

You can not disable Optimus. Because technology Optimus is not only software in bios and drivers! Its also hardware. As you say, LCD connected only to the Intel HD4000. And its not only in MSI. It Optimus for all.

Aljutor You can try to use it.

I just have some practical experience. I think that in this case we have, just the video card from Dell hardware incompatibility with laptop from MSI.

Incompatibility manufacturers! Because this card from Dell, but your laptop is MSI!