buluunee

btw svl is it totally normal or abnormal to get a +50mhz jump from stock voltage to OV? on stock voltage/ 1.0370/ i can push it with +443 core max and with OV vbios/ 1.0870/ i can push it till +493 core max which gives me 50mhz difference. is it normal or not?

tnx for advise but i know it have been testing at different clocks. Actually i can push my mem +910 where i usually gets bsod and that result is with 830 on mem which is totally stable no flicker no bsod no speed related issue. I knu most of ppl face a problem when they r on high mem oc however mine seems to have very good factory build... however the core max out at 1160mhz for the sake of no bsod

this is my max point and beyond this one i get bsod and temps max out at 75C NVIDIA GeForce GTX 675MX video card benchmark result - Intel Core i7-3630QM Processor,Micro-Star International Co., Ltd. MS-1762 score: P6702 3DMarks here is my score

whoops my bad i went back to only couple of pages and didnt find it tho it was there

No ov vbios for msi gtx 675mx????? Tho i am maxing out at 1100mhz at stock would like to push moar...

It seems hes being busy recently... im guessing that coz its a time for semester final term exams and assignments in most of the countries. Give him some time he will probably do his genius work some time around. Ps: we r also w8ing for ovted vbios on msi Gtx 675mx 4gb. At the moment stock voltage peaks at 1.0370 and would like to have several versions of ovted vbios to test it to get the decent power with less heat.

you will regret if you upgrade your gpu to 680m coz you will see a small amount of improvement. I would rather w8 for 780m card to be released. Even i have 675mx and ive seen what 680m can do and decided to w8 for 7xx series.

here i s min 3dmark 1.0 NVIDIA GeForce GTX 675MX video card benchmark result - Intel Core i7-3630QM Processor,Micro-Star International Co., Ltd. MS-1762. btw its higher than stock gtx 680m score and i got that score with throttling coz i am sitting on the stock voltage and higher the core higher the throttling as i examined. and also if your running on MSI machine then throttling causes are mostly related to EC.

its at peak. and i did benchmark w.o throttle and throttle. it does not influence that lot. around 50 or something very small amount.

@svl7 so i am sitting on 1030 max voltage or something else? coz seeing those gtx 680m vbios from the second post which are O,volted at 1050 or 1000 etc.

@Samelmamel there is nothing do with vbios or anything else. its EC failure. please refer to this thread : BETA EC for GT60 (16F3) & GT70 (1762) edit: also throttling does not decrease 3d performance score so i would rather look for the problem somewhere around CPU? could you upload the 3dmark page which is yours?

http://forum.techinferno.com/general-notebook-discussions/2166-%5Bguide%5D-nvidia-vbios-flashing.html read this one

@svl7 here it is: GoGo Share and my current voltage which i see from gpu-z is 1.0370 that means i am sitting on V1030? or something else?- - - Updated - - - here is the gpu z ss

@svl7 its the msi one which is from the second page with bunch of other vbios. msi gtx 675mx 4gb with tweaked to higher performance and higher oc limit.

its gonna work just flash it according to flashing guide from sticky