Jump to content

NforceRaid

Registered User
  • Posts

    34
  • Joined

  • Last visited

Everything posted by NforceRaid

  1. 16gb of ram 4gb I have used for the ramdisk (Dataram), and believe me the difference is apparent. 1333 to 1600 there is not much difference, but if the 1600 has a good price, why not? ciao
  2. 16GB HyperX 1600Mhz Ram, and all my works without problems.
  3. Alienware Command Center I work without any problems, and since I upgraded to Win8.1 Update1 has solved the problem a slow start, now in 8 seconds Win8.1 is active. Ciao
  4. there is also wanting to use a ram disk, or Virtual Machine ciao
  5. I do not know what might have happened, but after upgrading to 8.1 Update1 win, M14XR1 starts in 8 seconds, now with the A08 Bios Mod, I no longer have any kind of problem. Ciao - - - Updated - - - I with evo 500gb, I've never had any problems with bios, it A05/A08 with original Dell, and even with A08 Mod Do you use Win7 or Win8? ciao
  6. EVO 500gb, 16gb ram, Win 8.1Update1, A08 Bios Mod with SATA fix, start in 8 seconds. fantastic Ciao
  7. but you can not extend the warranty?, you definitely cost you less, than have it repaired out of warranty Ciao
  8. I do not know what to tell you, I also installed the bios mod. then I made ​​changes without knowing what I was doing, and the M14x R1 would not start. I followed that procedure and I put the original bios and then it started. Your M14x is still under warranty? if yes, call for service and tell them that you put the bios A08 (do not tell him of the bios mod) and you do it repaired. Ciao
  9. you have followed this guide link ciao
  10. if your max transfer rate is 250 MB/s and your ssd is connected to sata2, it means that it's perfectly But you have to understand why it is always or almost 100% you have tried to see in the task manager which is the task that you care more cpu? ciao
  11. try doing a test with ATTO Disk Benchmark, you should have the transfer rate on the 500 MB/s. my bench: ciao edit: I have not installed RST
  12. if your ssd is slower than the HD mechanic, sicuramenet is abnormal. For a better understanding, you should put the config of your pc hw/sw. ciao
  13. You can write that sw config on R1 model ssd Win8 or Win7, 32bit or 64 bit ram Gt 555M GF106 or GF116 I, with Samsung 500gb EVO, win 8.1 and 16gb of ram, I have no problems, (bios Mod 08) Ciao
  14. When you turn on M14xR1, you have a fast or slow start. ciao
  15. Hi, I have 16GB HyperX 1600Mhz Ram, Win 8.1 and Evo Samsung 500gb ssd, with bios A05, and all I works well, the only problem is that when you start R1 takes about 1 minute, but then everything is fast and no bsod and freeze. How do you solve the problem at boot? mod that needs to be done to fix the problem thanks edit You with Evo uses Rapid Mode?
  16. Hi, I have 16GB HyperX 1600Mhz Ram, Win 8.1 and Evo Samsung 500gb ssd, with bios A05, and all I works well, the only problem is that when you start R1 takes about 1 minute, but then everything is fast and no bsod and freeze. Ciao
  17. Hi, I have 16GB HyperX 1600Mhz Ram, and all my works without problems. Ciao
  18. R1 is stopped at A08, I think for R2 Ciao
  19. look here Link I have these KHX1600C9S3/8G 2x8gb Kingston HyperX 1600Mhz cl 9 and 0 problems ciao
  20. Hi anyone tried these? RAM SO-DIMM DDR3 16GB / 1866MHz Corsair Vengeance [2x8GB] cl 10 1.5 V rt [CMSX16GX3M2A1866C10] than KHX1600C9S3/8G 2x8gb Kingston HyperX 1600Mhz cl 9, there is a performance gain or is minimal and the upgrade is useless. thanks and ciao
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.