jafar

There's a difference on Bus Interface but I don't understand this. Your GPU showing x16 1.1 instead of 3.0 not like your son's GPU. If they are completely the same laptop, try to equalize the laptop driver to the latest version for PCIe driver, GPU, Bios, etc. Then flash it again.

Hi Klem I just wanna say thank you to you and to whom made this K3000M modded vbios. I've just realised that I got promoted then I try this modded vbios and it works perfectly. Screenshots Before After

I think the modded vbios here have increased the base clock speed slightly for stability and better performance. That's why you notice a difference gaming performance in between your Alienware. It could be possible to overclock, just check it using NvidiaInspector or MSI Afterburner to see how many MHz that you can increase. So if you have decided to flash it, don't forget to save the original vbios from your son's Alienware. There's always a risk by doing this. Do not reboot if you failed to flash the modded vbios, just flash it again until success or flash it with original vbios. Good luck

Hi You can try to export the modded bios from your previous Alienware using GPU-Z then flash it on your son's Alienware with NVFlash

Thank you. Please let me know when I get promoted because I would like to try the mod version too.

I've done several times with DDU and new clean install Nvidia drivers, reinstall windows 10, and then now I'm in windows 7 it still doesn't work. But there is little difference, in Win7 NVCP comes up with 4 options and have more power option while there are only 3D setting and Balanced power option in Win 10. I've also tried to create a profile with Nvidia PowerMizer in both OS set to max performance, it should be set the P-state to (P0) isn't it? but Nvidia Inspector keeps showing P8 state with stuck 0% load and FPS still low. When I reset the profile, Nvidia Inspector back to normal. Conclusion Everything I do, the GPU profile always set to idle (P8) and I can't force the profile to P0 state which is for high performance.

Klem, do you have original K3000M bios? This https://linustechtips.com/main/topic/1058561-simple-tutorial-ish-for-kepler-and-probably-maxwell-ii-bios-tweaker/ method also didn't work

could it be hardware issue? I think the Boimetric and Sensor have problem too, even I've installed the driver correctly.

I've tried your suggestion above correctly but the results are same.

Here's the test, I only get 7 - 21 fps when playing House flipper and the GPU loads to 99% without any clock speed increasing. If it was underclocked, so all this time I've never felt the default performance from this GPU lol. What should I do?

Need help I think there's problem with my original K3000M gpu, it seems unusual because it shows that gpu clock is 654MHz but it's actually locked at 135MHz and also with memory clock is locked at 324MHz. Using MSI Afterburner to increase gpu clock +135 is useless. Does it happen to your default K3000M? Can vBios mods fix this? Thank you