Jump to content

astrolopiteco

Registered User
  • Posts

    10
  • Joined

  • Last visited

Everything posted by astrolopiteco

  1. Hi, I also have a quadro p4000m and I can't install it on my alienware m17x r4 could you help me? This is my graphics card id: PCI\VEN_10DE&DEV_1BB7&SUBSYS_05511028&REV_A1 In device manager it shows it as microsoft basic video card. Thank you
  2. Hi everyone. I desperately need help with an M17x r4!! I can no longer use the 3D 120Hz display!! The display worked perfectly with gtx 680m 2gb gpu, without any modified drivers. Since I tried to install another gpu the black screen display, I can't even view the bios. I have no error beeps, the machine starts up to load the operating system, always with a black screen. When I put the 680m gpu with the drivers installed, I only see if I connect an external monitor!!! I've made countless attempts for 3 days, nothing to do!! If I put the 60hz panel back on after resetting the bios by removing the buffer battery, I have the image on the panel again. Even if I peg it doesn't solve, I'm going crazy!!! One last thing if I remove the gpu with the 130hz panel I have lighting for a moment, but then 8 beeps, because the gpu is not present. Please help me restore this machine, I'm sure the panel works. I tried with 3 gpu always the same black screen but loads without any error beeps!! Guys I don't want to have a 60hz display without even a gpu. I have a nivdia quadro p4000m 8gb and i can't use it!! I thank you all
  3. Hi everyone, it's been a long time since I participated, also because I stopped with the upgrades to my M17X R4. But now I have an 8Gb P4000M graphics card, and I would like to have information on a possible installation with it. I currently have 1 GTX 680M 2 120mhz 3D displays 3 Bios A15 unlocked 4 Enabled in the bios graphics card in PEG, (if I change this setting the pc does not start and emits 8 beeps) The drivers on the Nvidia site are: 426.50-quadro-desktop-notebook-win10-64bit-international-whql, package including 3D driver support until 2020 Latest Driver: 536.25-quadro-rtx-desktop-notebook-win10-win11-64bit-international-dch-whql with separate 3D driver: 536.25-quadro-rtx-desktop-notebook-win10-win11-64bit-international-dch-whql What I ask is if anyone has instructions on installation and configuration in the bios for this graphics card. In this regard, I wanted to ask why I don't have the possibility to change with the FN+F7 command to change from nvidea video card to the intel one, also because when I disconnect the power supply this message always comes out, I just have to close the window and that's it. Last thing can I use a Dell 330w power supply regardless of the video card I will put? I hope someone can help me with this upgrade. I will make some mods to the CPU and GPU heatsinks that I will post as soon as I run them, I'm waiting for the heatsinks of another M17x r4 to be disassembled. Thank you all Sorry for the translated english
  4. Hello Klem, I wanted to ask you if flashing the bios unlock is dangerous? Once I get bios unlock, do I have to do some adjustments or setup in the bios? Thank
  5. Hi Klem, I wanted to ask you if the clevo gtx 680m 4gb card is compatible with m17x r4 3d display, i need unlocked bios (i have unlocked a15 but not yet installed) or modified video drivers? Or will be recognized quietly s once placed in her quarters. Will win 10 also have its drivers? Thank you all
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.