Jump to content

bg6dt

Registered User (Promoted)
  • Content Count

    7
  • Joined

  • Last visited

  • Days Won

    2

bg6dt last won the day on October 10

bg6dt had the most liked content!

Community Reputation

5 Neutral

About bg6dt

  • Rank
    Curious Beginner

Profile Information

  • Location
    china

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. bg6dt

    12.5" HP Elitebook 2570P Owner's Lounge

    I designed it using kicad software. If you can use this software, I will send you the PCB layout file.
  2. bg6dt

    12.5" HP Elitebook 2570P Owner's Lounge

    That's great. I am very happy that this is helpful to you. You mean IntelIvbGop and IntelS nbGop drivers?I replaced the new driver with the UBU tool(UBU_v1.71.1). I am curious to know how your backlight works, panel enable signal and the pwm signal.
  3. bg6dt

    12.5" HP Elitebook 2570P Owner's Lounge

    I am not a businessman, doing this is just my interest, so I am not ready to sell these. The 2570p has only a single LVDS signal, and the resolution cannot be used above 1440x900. If 1440x900 or more is required, a dual LVDS signal is required.
  4. bg6dt

    12.5" HP Elitebook 2570P Owner's Lounge

    Backlight enable detection, I used the voltage detection of Lane0_P, when the EDP has a signal, the voltage is 0.5V, when the EDP has no signal, the voltage is 0V, MCU uses ADC detection, output high and low level signal control panel backlight. Backlight brightness PWM, MCU detects keyboard FN+F9 and FN+F10 buttons, output PWM signal control panel brightness . Modify BIOS VBT, modify with Intel BMP Utility tool, delete internal LVDS display, do not use clone mode, only one monitor, full UEFI mode works perfectly, external monitor works perfectly. The BIOS version I use is F.72, see VBT.ZIP file. 2K panel model: LQ125T1JX03C Edp signal cable, I made it myself, the signal cable length is 13cm, the differential signal cable is twisted and twisted, covered with shielding tape. DP_TO_EDP1.pdf VBT.zip
  5. bg6dt

    12.5" HP Elitebook 2570P Owner's Lounge

    Yes, what you said is correct. I compared the BIOS of 8770W. after edited the IFR section, the key point is this: Variable: 0x368, and I have deleted the WWAN module using UEFITool. I plugged the bluetooth device into the WWAN socket, bluetooth Work perfectly, no whitelisting problem.
  6. bg6dt

    12.5" HP Elitebook 2570P Owner's Lounge

    Hi, guys, please forgive my english is every poor, I hope you can understand what I said. about msata, I delete the BIOS's SecureUpdating module and modified PlatformSetup module, removed the modem option, added the msata option, msata works perfectly, but can't boot the system directly from msata. The BIOS version I use is F.72, modified with the UEFITool tool, if you are interested, you can test it, but you must be careful, you must know how to use UEFITool and flash BIOS. It is important to backup your original BIOS before you start. The motherboard's WWAN socket sata line needs to solder four 0.1UF capacitors or 0 ohm resistors. I also changed the TFT to 2K display, using the DP in the docking station's interface. PlatformSetup.zip
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.