Zoltan Kassay
Registered User-
Posts
22 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Everything posted by Zoltan Kassay
-
M14x R2 A13 Unlocked Bios + Modified Vbios Now Available!
Zoltan Kassay replied to Eats7's topic in Alienware M14x / AW 14
Hi all! What is the best setting in the bios? I know that disable bidi prochot and turbo are recommended, but the others? what i have to enable or disable especially in cpu thermal configuration? dts, acpi 3.0 t-states? And my other question is the dptf! dptf,lpm,clpm, processor thermal device and pch thermal device (en or disable?). I dont know so much about these settings. Thanks for ur reply and help! -
M14x R2 A13 Unlocked Bios + Modified Vbios Now Available!
Zoltan Kassay replied to Eats7's topic in Alienware M14x / AW 14
Yes. It is the same game. It worked well with oc never got error message on a11. I have no idea. maybe i should go back to a04 then a11 edit: now iam using unlocked a11 again. I just simply go back to official a11 and then unlocked a11. It solves my problem. No crashes, everything is perfect! -
M14x R2 A13 Unlocked Bios + Modified Vbios Now Available!
Zoltan Kassay replied to Eats7's topic in Alienware M14x / AW 14
I tried it, but didnt help me. When the game is crashing it goes back to default values. Im sure it is not the game fault, bec on the prev bios version i was able to play more than 5hours without crashes. -
M14x R2 A13 Unlocked Bios + Modified Vbios Now Available!
Zoltan Kassay replied to Eats7's topic in Alienware M14x / AW 14
I tested this unlocked bios, before that I used unlocked a11 bios, it was perfect. I did a clean installation after i upgraded my bios. I wanted to use 1100/2400.I use these settings since one year. My problem is that after few minutes (in the case of sc blacklist) the game is crashing. I trried to use both p5 or p0 states and tried different drivers. (320.49, 326.80) I use nvidia inspector, I noticed that every time it was reseted to default settings. 835/1000 Is it normal or something is wrong? A11 was worked fine. Thanks for your hard work and reply! -
Firstly I installed the first unlcoked v1 a11 but i always get error 252. After you modified it i tried this one: [FPT]-M17x_R4_BIOS_A11_-_[unlocked]V2.zip (download from the 1st page). When i completed i noticed that u updated it to [FPT][M14x R2] BIOS A11 'unlocked' - 650m 950-1400 - TEST-V2.zip. It works good, i just tested it.... edit: @Michael! Is it possible to adjust the voltage that dont drop from 1,037 to 1,012? svl7 said that it is possible sometime but he too busy right now to do this. I can send log file or whatever u need
-
I also have the same problem. Firstly i installed the original a11 and then this modded a11. *.bin doesnt found. If I rename it to M14x-R2.bin it complete the process but crashed down the copmuter after restart. Now I did a blind flash to a04 and update it to a11 ( in a11 no *.fd file) What do u suggest to me?
-
Hi svl7! Is it possible if you have free time to adjust my gpu voltages? dont know why drops from 1,037 to 1,012.. i noticed something: if i run the nvidiainspector with windows start the p-states change earlier. If dont you can see. I think it is a long time. or it is normal? (i started windows with my settings 1130/2800)
-
I had time to downgrade.. And it's so easy i cant believe that. Im on offical a4 from off. a10. Big thanks for @svl7 and @deadbydawn. Next step is: put back the battery and install svl7 a10 bios Im on svl7s a10 bios. The only error was that my alien wasnt shut down when finished the the installation of a10 but the screen appeared. I wait about 10 min. but nothing happen. I turned off with the alien key. It seems everything working well
-
I found this bios version: Driver Details | Dell United States I extract this a04bios and use this method: http://forum.techinferno.com/alienware-m18x/1981-how-recover-bad-flash-alienware-m18x-r2-2.html )the name will be m14r2.hdr. My other question would be that is it important to remove the battery?!, but I think the answer is:YES Some recovery method dont mention to remove ur battery.. The other process is the same. It is clear! I will have offical a04bios After the administrator acitvate my account I can download ur modded a10bios and how can I install it? (regular way) use the previous method or this? http://forum.techinferno.com/general-notebook-discussions/2166-%5Bguide%5D-nvidia-vbios-flashing.html Thanks for ur patience and sorry if i asked something stupid thing Ohh just dircetly install it by using flshook? After I did this method I write down the results! I hope everything will be correct!
-
OFFICIAL: M14x - Benchmarking Thread
Zoltan Kassay replied to StamatisX's topic in Alienware M14x / AW 14
Hi svl7! How can I send my gpu-z log file to you? I didnt find your e-mail address. Im using the official dell a09bios. I stressed my gpu with furmark/3dmark 11 but if u can and have enough time to take a look at, it will be very useful. Im using 1130core and 2500 mem freq (nvidiainspector p0 state). Can I use your a10 unlock bios(m14xR2) or need u any further information? thanks for your reply! -
OFFICIAL: M14x - Benchmarking Thread
Zoltan Kassay replied to StamatisX's topic in Alienware M14x / AW 14
hehe yeee we can hit the 7,3 points with an oc gt650m -
OFFICIAL: M14x - Benchmarking Thread
Zoltan Kassay replied to StamatisX's topic in Alienware M14x / AW 14
Here is my 3DMARK11 result: NVIDIA GeForce GT 650M video card benchmark result - Intel Core i7-3630QM Processor,Alienware M14xR2 score: P3152 3DMarks 3152P. My settings are the following: 1130/2500.. I use my m14xr2 with turbo off all the time and with cm u2 cooler pad. It reduces my gpu and cpu temp more than 4-5C. Playing with farcry3 (ultra settings) after 6 hours, my gpu temp was 57-60, my cores temp were: 60-64. I think it is really good