BalkanBoy

Nice results there mate, I'm glad you found source of the problems I think you should go with 1.0mm, 0.5 are too thin in this case, don't let your power mosfets and inductors overheat, you'll have a gap between them. I'm using Arctic Cooling pads because they're available in local PC store P.S. if you have fat pads you can use some solid and clean cylindric object and roll them out a bit, like making pizza That's what I'm doing in a case of emergency. P.P.S. Extreme series of cpu have 10W higher TDP. Try to put some weaker cpu and than see if it's running on battery. If not than you'll probably need new battery. Good luck!

You should go with 1.0mm thermal pads for every component, I found that ideal thickness for that laptop. I had at least 20-30 MSI, Erazer, Cyberpower and similar machines with various cards and I can't remember I ever had that high temp on GPU. P.S. what's the CPU temp? I guess it goes 60 on idle

Do you got original heatsink for k4100m or you modified your old one? You can remove those thermal pads just for quick test, nothing should be damaged. Regards

Hi guys, I'm new to this forums so please excuse me if I'm posting in wrong topic. I need latest Prema BIOS for Clevo P870DM-G to support i7-7700k. At this moment I'm building new barebone so I don't have 6th gen CPU, I don't know is there any flashing method with USB boot available or I need to find some 6th gen CPU prior flashing. Donation is not problem Regards