Héctor Arhe

I know, and the stock 3d is .88v, and im getting .93v (from the modified bios), how do I reset my bios?, i tried using dell stock bios and won't work x( i´ve tried all bios i could found and still cant get my factory settings, please help me

Is there any way to go back to stock voltage? i tried the original bios file from dell and one found in techinferno but i still get 9.3 volt on 3d plz help

I know, and the stock 3d is .88v, and im getting .93v (from the modified bios), how do I reset my bios?, i tried using dell stock bios and won't work x(

I recently tried to overvolt my GPU and only I got was BSOD, I tried the normal overclocking values with the modified Vbios and still got BSOD, went to DELL.COM and downloaded the stock BIOS and tried to overclock with that, and got BSOD... went to GPU-z to monitor my voltage and noticed that even tough a went back to stock bios, I'm still getting the .93v how can I go all the way back to .83v stock? plz help, this is so anoying

how can i check if the vbios was indeed modified? cuz I'm trying 790/1580/1000 and I keep getting BSOD :'(..... max I can go is 756/1504/1000, and thats the same I could do before applying the last bios update. BTW, what is that MOBO change you mentioned? Im on a M14xR1 with gt555m 3gb. thx

I followed instructions and my BIOS has changed (unlocked one)... but I still can't change my voltage... what am I doing wrong? . plz help me

Is there anyone here ho has FRIED their GPU by overclocking? cuz all i've found in the forums are people who have disfunction when overclocking, but none ever broken it, can some one tell their sad story?

Bat For Lashes- Laura (Graffiti on Mars remix) Very recomended, came in Dave Seaman September Chart for Frisky Radio

3D vision only works with 3D tv connected via HDMI. factory monitors usually support refresh rates of 40hz and 60hz, for 3D you need 120hz, Once connected to your 120hz 3D monitor it will work perfectly, on my gt555m it runs Crysis 2 on highest settings, overclocking to Core 754, Shader 1504, Memory 1080.

I have an M14x R1 gt555m, Ive found that the best software is EVGA 2.1.2, (the newest one wont work on this gpu), Im getting Core 752 Shader 1054 and Memory 1080 and works very stable, never crashed. Once i got it to 764 CORE and MEMORY 1080 and after 30min-1hr it crashed, sometimes after the crash, the GPU driver just restarted and kept with overclock, sometimes just restarted and went standard config, and sometimes went blue screen :S (just happened once), so I got scared and wend down by a bit. I really recommend you C 752 S 1054 M 1080.

Hi, Im about to mod my BIOS to go even further, I get stable with CORE 765mhz, SHADER 1530 and MEMORY 1080, i just want to know what is the recommended voltage for this GPU. thank