Jump to content

HunterAP

Registered User
  • Posts

    2
  • Joined

  • Last visited

Profile Information

  • Gender
    Not Telling
  • Location
    New Jersey

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

HunterAP's Achievements

Curious Beginner

Curious Beginner (1/7)

0

Reputation

  1. Saw some implementations of using a TB2 enclosure (like the Akitio Thunder2) and plugging it into a TB3 capable laptop. My question is if the reverse can work (so TB3 enclosure to TB2 port on the laptop). I currently have a TB2 capable G46VW, but I wouldn't want to have a TB2 enclosure if I ever decide to get a newer laptop in the future with TB3 (even if a TB2 enclosure would be cheaper).
  2. I recently flashed a custom BIOS on my G46VW, and now it's stuck in a boot loop. Here's what happened: 1. Installed custom BIOS, shut down after installation was complete. 2. Restarted the laptop and went into the BIOS. 3. Took a look at the settings, but didn't change anything. I even exited the BIOS with "Discard all changes" option. 4. Rebooted laptop, now screen won't turn on at all. The specs for my specific version of the G46VW are so: i7-3630QM (came with an i5-3230M) Samsung 850 Evo 1TB (came with some 750GB HDD) Motherboard is Rev 2.2 (AKA the Thunderbolt 2 version) 16GB Ram (was originally 8GB) I've read that many other had this issue, except for whatever reason nothing is working for me. So far I've tried: 1. Ctrl + Home at boot to go into the BIOS Recovery. 2. Took out the boot drive, downloaded the newest stock BIOS from the Asus site, renamed it to "G46VW.BIN", placed it in the root directory of the boot drive, put it back into the laptop and tried Ctrl + Home again. 3. Put the renamed BIOS file onto a USB drive formatted as FAT32 and tried Ctrl + Home again. I did this for all three USB ports on the laptop. 4. Disconnected the battery and charger, held down the power button for 2 minutes, then tried Ctrl + Home again. 4. Removed CMOS battery for about a day, held the power button with both the CMOS and laptop batteries disconnected, reinstalled the CMOS battery and tried Ctrl + Home again. I saw some ridiculous solutions online, like disconnecting all possible parts from the motherboard, removing the CPU, dedicated GPU, and their heatsinks, then heat up the GPU so it "re-solders" itself, then reinstall everything. I don't think this will work, considering this has nothing to to with the GPU. I even called Asus' support line just to get an estimate on time and cost, which they said will be roughly a week or so and $500, which is safe to say is not happening. Any and all help is greatly appreciated.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.