dan71
-
Posts
18 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by dan71
-
-
On 26.01.2017 at 5:23 AM, spartacuss said:
Can you play in the laptop screen?
yes you can
-
On 24.10.2016 at 11:17 PM, SAA said:
Hello, I have an Acer Aspire V3-771G-736b1275Maii with i7 3630QM, 12GB RAM and GT650m from factory. I have upgraded my HDD to a 480GB SSD.
Do you think your setup would work on my computer?
EDIT: Forgot to mention I'm on Windows 8.1 if that matters.
Mine works on W7 ultimate and W10 Pro
-
Ha, ha... when I place my order was last pair, now... another last pair :)).
Sorry but I don`t have any dump for 25Q16.
-
Imrule, if you have a bios programmer there is no need to buy new chips, just put a stock 3.05 or 3.08 on both.
Then downgrade to 2.07 and upgrade to 3.05 modded
Place order on Ebay and now way my bios to come got last pair
http://www.ebay.com/itm/BIOS-Chip-LENOVO-Ideapad-Y510P-Dual-chips-/400641799916
-
11 hours ago, Imrule said:
UPDATE: I swapped the bios chips I didn't get past POST. The laptop turns on for a few seconds, turns off, turns back on with fans at full speed then turns off and stays off.
Not really sure what to do at this point. I tried this once without the CMOS battery in and the second time I soldered it back on. Made no difference.
I guess the only solution at this point would be is to order a new BIOS chip and solder it on and see what happens. Not sure if I need to order two of them and replace both chips or just one.
If there's anyone out there that can help or give any information on where I can get a new BIOS chip, Please, help me out.
I know there's still hope on fixing this but I'm out of solutions, anything will help at this point.
Both have numbers UH52 and UH53.
On Ebay they are sold in pair 25Q16DV (UH52 on our laptops) and 25Q32FV (UH53). I think 52 is primary but no sure.
JCMOS1 jumper done same thing as a desoldered coin lithium battery.
This Lenovo laptop is for testing and learning only as I have a 17" Acer i7 with eGPU Asus GTX1060 on it.
But when I use same setings on both laptop on Bios video settings Lenovo got bricked.
-
9 hours ago, dan71 said:
Already try that, only coller start to spin and keyboard light up
Found there is no need to unsoldered coin lithium for bios, under lover sodimm you will find 2 contact for reset.
But this not solve my problem still bricked
I will buy my bios chip from ebay, change it and I will unlock again, but not use it for eGPU.
-
Already try that, only coller start to spin and keyboard light up
-
yes in 3.05 modded you can
-
My Y510p is bricked.
Boot but no image on display, can`t enter bios.
All I done is to set UMA only and set 300ms at video setup.
How to do emergency BIOS recovery for Y510Y? With 3.05 stock bios and only Yx01.bin from Crisis folder on USB stick don`t work with FN+R
-
Yupii ! I just flash with 3.05 unlocked
Time to bed, tomorrow will test GTX1060 on it
-
Lenovo Y510P with single 750 bios 3.05 stock W10 home /64
Using eGPU Asus GTX1060 6Gb on Acer V3-771G with modded bios. Work like a charm on internal or external monitor on W7/64 and W10Pro/64
Now I just want to use 1060on Y510P but can`t instal unlocked bios for whitelist.
Is anyhere a video for this? I cant back-up my stock bios.
-
Lenovo Y510P with single 750 bios 3.05 stock W10 home /64
Using eGPU Asus GTX1060 6Gb on Acer V3-771G with modded bios. Work like a charm on internal or external monitor on W7/64 and W10Pro/64
Now I just want to use 1060on Y510P but can`t instal unlocked bios.
Is anyhere a video for this? I cant back-up my stock bios like in this post :
-
adapter : PE4C V3.0 mPCIe http://www.hwtools.net/Adapter/PE4C V3.0.html with Dell powe adapter
eGPU : Asus GeForce GTX 1060 https://www.asus.com/us/Graphics-Cards/TURBO-GTX1060-6G/
With modded(unlocked) BIOS for V3-771G in advanced tab set primary display to IGFX and leave switchable graphics work like a charm on laptop display.
Just install driver for eGPU(gtx1060) and optimus work fine on W7 Ultimate/64 and W10 Pro/64.
Done Time spy test on laptop display and I got:
3193
GPU 3270
CPU 2818
Compared with best score using GTX 1060 6GB and I7 6950X I have 60.7 % not bad for a 2013 laptop
5258
GPU 4765
CPU 12734
-
Done Time spy test on laptop display and I got:
3193
GPU 3270
CPU 2818
Compared with best score using GTX 1060 6GB and I7 6950X I have 60.7 % not bad for a 2013 laptop
5258
GPU 4765
CPU 12734
-
With modded(unlocked) BIOS for V3-771G in advanced tab set primary display to IGFX and leave switchable graphics work like a charm on laptop display.
Just install driver for eGPU(gtx1060) and optimus work fine on W7 Ultimate/64 and W10 Pro/64.
-
with last NVidia driver don't work , with 372.70 work but only on external display
done only 1 test, 3Dmark 2011 and I got
- Graphics Score
- 12 506
- Physics Score
- 6 806
- Combined Score
- 6 932
- and my gtx1060 is a 820 :))
- http://www.3dmark.com/3dm11/11614037
- can I use laptop monitor without seput 1.3 from ****** ?
- BTW for Acer laptop V3-771G there is a nice moded BIOS.
On 9/28/2016 at 2:55 PM, dan71 said:With last NVidia driver don't work , with 372.70 work but only on external display
Quotedone only 1 test, 3Dmark 2011 and I got
- Graphics Score 12 506
- Physics Score 6806
- Combined Score 6 932
- and my gtx1060 is a 820 :))
- http://www.3dmark.com/3dm11/11614037
- can I use laptop monitor without seput 1.3 from ****** ?
- BTW for Acer laptop V3-771G there is a nice moded BIOS on www.bios-mods.com versiunea 2.28 cu totul anlocked
-
Hi ,
I have Acer V3-771G 73634g75makk (i7 3632QM, 8G RAM, GT 710M) BIOS 2.28 A_A
S.O. W7 Ultimate/64 and W10 Pro/64
adapter : PE4C V3.0 mPCIe http://www.hwtools.net/Adapter/PE4C V3.0.html with Dell Adapter
eGPU : Asus GeForce GTX 1060 https://www.asus.com/us/Graphics-Cards/TURBO-GTX1060-6G/
Both windows detect GTX 1060 but no one works.
Any chanse to work without Setup 1.3 by Tech Inferno Fan just like rgpu ?
I ask this because I`m not a computer guy and I try to make a gaming laptop for my son.
I`m interested to use laptop display and only occasional external display
17" Acer V3-771G + GTX980Ti@4Gbps-mPCIe2 (EXP GDC Beast) + Win7/64 [rgpu]
in Implementation Guides - PC
Posted
I`m using V2.28 unlocked bios.
In bios I change only 2 things :
1.cooler setup (low & high speed and low & high temperatures for that speed)
2.advanced tab set primary display to IGFX and leave switchable graphics on
Now I rarely use this laptop since I got myself a ROG GL553VE and is on sales for upgrade my M2 PCI-e, 2.5" SSD and 32Gb RAM on that ROG.
I can`t wait for unlocked bios for that ROG