airbusa321

I have looked around, but I cannot seem to find a solution. Also, I mean that the screen is stuck on the Windows logo with the loading circle that is presented before the login screen. Finally, I have tried plugging in the GPU at the boot menu but am only getting the problem. Is there a specific thread I should look at? Sent from my iPhone using Tapatalk

Hi all, I have just finished installation of my eGPU with a Thunder2 Box and an EVGA GTX 750 TI inside. The card has plenty of power (120w), and I am having trouble after driver installation. I am running Windows 10 on a 2015 rMBP with Integrated Graphics. After successful driver installation, I am struggling to restart. I reached the boot screen by pressing ALT and plugged in the box before booting into Windows. I am now stuck on the splash screen. The box is connected to a TV via HDMI as a monitor. Does anyone have any suggestions/answers? Any help would be greatly appreciated! PS Windows 10 detected the card during driver installation. I just cannot boot with the box plugged in. Thanks, Josh Sent from my iPhone using Tapatalk

Semi-related question: Though I am considering waiting for the GTX 1050, would it be a good idea to go with the Asus GTX 950? It does not require a 6 pin connector. I ask because I heard that EVGA cards are somehow better with plug and play capabilities. Sent from my iPhone using Tapatalk

I am not sure as I haven't explored the EXP GDC. It looks much more complicated and that in the end, you will not have a very pretty setup. Just off the top of my head, using HDMI doesn't make sense since it is slower than Thunderbolt 2 (about 18 Gbps) and is not a very common option when concerning Thunderbolt accessories. The component itself looks more like it belongs in a desktop computer in need of an extra PCIe slot (though I am not sure since I have not explored it). IMO, the Akitio provides a much better solution in terms of looks, speed, practicality, and everyday use. Compared to other eGPU peripherals, it is a great deal. Sent from my iPhone using Tapatalk

Hi there, I am also a fan of eGPUs and am in the process of building one with the Akitio and either a GTX 750 Ti or a GTX 1050. In your case, there are probably adapters for Thunderbolt to HDMI, but they are unpractical. Thunderbolt has a speed of 20 Gb/s and HDMI is much slower, so the data transfer speed to and from the card will be slow. I would recommend getting an Akitio and a low power card without a pin connection requirement. You can buy a better external PSU (around 120w) and use that to power a card directly via the PCIe slot. That is what I am planning on doing. Regards, Josh Sent from my iPhone using Tapatalk

Thanks so much for answering my questions! I just have a few more... 1) How stable is the eGPU setup? 2) When you say "pretty much, yeah", do you mean that after driver installation it's as simple as booting into Windows 10 Bootcamp and then plugging the eGPU in? 3) What would my options be for using a card with a 6 pin power connector (such as the GTX 1060)? Thanks again. Sent from my iPhone using Tapatalk

Hi all, I am very interested in constructing an external GPU for my new 2015 13" rMBP and have been lurking on these forums nonstop for the past few days. Let's just say that my head is spinning from all this information. I am on the edge of purchasing an Akitio Thunder2 but have many questions. These are as follows: 1) I am considering using a new EVGA GTX 750 TI (no PCIe power). How would the power supply work? Can I use it at full clock with the official Akitio 72w PSU or do I need something more (if so, kindly link to a reliable source)? 2) I am running Windows 10 Bootcamp in UEFI. Does this mean that I can just plug-and-play the GPU? 3) Could I use my internal display? How would I go about disabling the internal display and using an external display instead? PS: I am planning on using Windows 10 for all of this. Thank you all so much! Any help is greatly appreciated. Sent from my iPhone using Tapatalk