ShanghaiOhMy

Oh shit, well that makes a lot more sense. Guess I'll sell the one I got and use the proceeds to buy the correct one. Thanks!

Long overdue update: I managed to get the stripped screw out, but now I have a worse problem. It seems that my mPCIe port isn't an mPCIe port; it's a micro PCIe port. Can this be converted? or do I need to give up?

I actually managed to the wireless dongle working right - the issue was just drivers, not technical limitations. I am still totally stumped by this stripped screw though!! I took my laptop to some lovely friends with a lot of tools and even after we tried everything we had, we still couldn't get a hold on it.

Current Status: HELP NEEDED! mPCIe port actually micro PCIe, not sure if I can convert it or if this is a lost cause Materials: bPlus PE4C V3.0 Adapter (mPCIe connector version) MSI NVidia GTX 970 a PSU (this is still in the mail from a friend so I don't remember the model) USB Wireless Adapter (I bought this one but it's being terrible) (optional) mPCIe flexible extender cable (I use this to help keep the laptop mobile) Sections: Part 1: Open the laptop Part 2: Remove the WiFi card Part 3: Connect the extender (or the bPlus board if you're not using the extender) Part 4: Connect the graphics card and PSU Part 5: Software and integration Part 1: Opening the laptop Unplug your laptop and power it down. Place it upside-down in front of you so that the labels are upright. Starting from the top left, unscrew the screws around the outside of the case. Move to the three on the inside, saving the middle one for last. Note that the middle screw will not unscrew all the way. Just unscrew it until it's loose; you'll push it out from the other side in a moment. Insert a long, thin object such as an unbent paperclip into the indicated screw holes. This will pop the keyboard off the front of the laptop. Gently pull up the rest of the keyboard. The keyboard will be connected by two wires. You can choose to disconnect these, but leaving them attached is fine and less annoying. Lift the keyboard out of the way to find the middle hole with the screw that doesn't unscrew all the way. Using your long object, poke the screw out. At this point, the disk drive (or placeholder if you don't have one) will be loose, so if you're going to remove it (like I did), feel free to slide it out. Starting from the disk drive hole or a corner, pull the cover off the back of the laptop. You will hear it click as it goes. Part 2: Removing the WiFi card Now that the laptop is open, locate the mPCIe slot. Gently disconnect the two antenna wires by pulling them out at their heads. If you want to preserve the internal wireless card for later use, be very careful with this step; I accidentally crushed one of the wire terminals without even trying. Remove the screw which holds the card in place. Unfortunately, the people at Lenovo made this screw out of reconstituted sewage instead of metal, so chances are it will become 100% stripped the moment you touch it. [more to come eventually, including picture embedding] Help I need right now: Can I convert my cables or am I done for? (see reply below for image)

Hello hi! I'm Shanghai and I'm here cause I need to make my laptop play Overwatch better. Lenovo z41-70, which so far I haven't seen anyone else do.

Hi! I've been looking into hooking up an eGPU to my Lenovo z41-70 laptop, a build which I haven't been able to find a prior example of anywhere. The laptop has an mPCIe slot on the inside, but the wireless card is currently connected to it. My ultimate goal is to preserve as much mobility as possible, which means I need wireless functionality and I need to keep the case closed. So far, I already have my hands on an Nvidia GTX 970 and a matching PSU. I'm planning to get this BPlus mPCIe adapter and this USB wireless adapter (unless anyone has better recommendations from personal experience). My biggest question right now is will I be able to display the eGPU output on the internal screen? It's a really nice FHD screen, so I don't want to let it go to waste. I'm using Windows 10, and I will install the newest Nvidia drivers once the card is hooked up. If I need to use an external monitor, I don't think the project will be worthwhile. Does it seem possible? Also, is there a good solution to quickly switch between internal graphics and the eGPU? I'd like to be able to just unplug the mPCIe cable and get moving without pausing to restart the computer. Regarding keeping the case closed: I don't have an optical drive in my laptop, which means I have a big empty plastic placeholder that I could totally make my own mPCIe port inside of. The only issue with this is that I would need a ribbon extender for the mPCIe port which does not have a board to support a card on the end. Does such a thing exist? Where can I find it? Relevant Laptop Specs: OS: 64-bit Windows 10 Home Processor: Intel i5-5200U @2.20GHz RAM: 8GB CPU-integrated Graphics: Intel HD Graphics 5500 Internal Graphics Card: AMD Radeon R7 M360 All drivers kept as up-to-date as possible.