RubbaBoy

Hello, I have been trying to do the DSDT override with eGPU Setup 1.30, and it's not working. I used Tech Inferno Fan's method with Setup 1.30 and pt MEM writefromfile 1 [address] dsdt.aml because when i was testing with the asl /loadtable dsdt.aml would give me a bluescreen, and I would have to do the windows setup repair or whatever, and it took forever. When I do the command in the DOS screen of Setup 1.30, then chainload, at the Windows Boot Manager screen (Where you pick yous OS or Setup 1.30) gets frozen and won't boot. I talked to Tech Inferno Fan and he said that was because the DSDT override wasn't working properly. When i compiled the DSDT.dsl file to the DSDT.aml file, there were no errors and only warnings. My specs are: Windows 7 Professional HP Elitebook 8460p Gigabyte GTX 970 (Trying to get it working over Expresscard slot) DIY eGPU Setup 1.30 If i could send the file to anyone for them to check that I added the QWord part correctly, or think I did something wrong, just tell me. Thanks, RubbaBoy

Hello, I have bought a few weeks ago an EXP GDC v8 from http://www.banggood.com/Expresscard-Version-V8_0-EXP-GDC-Beast-Laptop-External-Independent-Video-Card-Dock-p-1009976.html, and an EVGA 600W Bronze power supply from newegg, to use with an NVIDIA Quadro FX 1800 (Untill I get a new graphics card, if more preformance is needed) and I keep running into Error code 12. I have for a computer an HP Elitebook 8460p, running Windows 7 Professional (Service Pack 1), 64 bit, a core i5-2540M @ 2.60 GHz, and 16 gigs of RAM. I have tried multiple solutions, including disabling other devices to try and find more resources for my laptop, and multiple DSDT overrides, with unexpected outputs for the .dsl file. I have the file "iasl-win-20120620" (I'm not sure where I downloaded it from) and the result from when i did "%IASL%\iasl.exe -g" after defininig IASL as that iasl-win... folder, the output in command prompt is this: http://pastebin.com/EVuNe9E9 and the files it created to the DSDT folder I set the directory to (and their sizes) are: DSDT_161C.dat - 149 KB dsdt_161C.dsl - 997 KB FACP_161C.dat - 1 KB RSDT_SLIC-MPC.dat - 1 KB If you would like to see the contents of dsdt_161C.dsl, ask me, i will find a way to send it, as it is too big for pastebin and the extension is not allowed to upload on this website. I at first was following this video: https://www.youtube.com/watch?v=4N-gQYEKukQ, but I could not find CR_6, so I went over to this video: https://www.youtube.com/watch?v=zRSGHGCEGRA, and realized they had two QWordMemory sections when they saved the document, because one was there in the first place, so I pasted the section of QWordMemory I found in many places: QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0x0000000000000000, // Granularity 0x0000000C20000000, // Range Minimum, set it to 48.5GB 0x0000000E0FFFFFFF, // Range Maximum, set it to 56.25GB 0x0000000000000000, // Translation Offset 0x00000001F0000000, // Length calculated by Range Max - Range Min. ,, , AddressRangeMemory, TypeStatic) after the latest DWordMemory. I compiled it with %IASL%\iasl dsdt_161C.dsl The ending output of that command is: Maximum error count (200) exceeded ASL Input: dsdt_161C.dsl - 28534 lines, 956320 bytes, 11237 keywords Compilation complete. 201 Errors, 0 Warnings, 1 Remarks, 4001 Optimizations I have also tried a few other ways of DSDT Overriding, with no luck. Also, please note: I know about Setup 1.3, and how it could most likely fix my problem, but I am honestly not willing to risk the extra money I have after buying the adapter and power supply on something that I'm not completely sure will work. I would be extremely thankful if someone helped me with this, and if you need anything else like files, or have me run commands, please ask!