Fonzi1971

Hi everybody, first of all.... thanks a lot Nando and to everybody out there contributing to eGPU solutions I have a pumped Aspire with only an onboard Intel HD in it, Its a 5750 that standard has only 4g rams and no dGPU Was in a german forum till before, didnt realize all the infos come from there I resume what i made till yet to make you an idea where i am. I need to become the right suggestions because i am a bit lost between go on with setup tool, hope in the right bios settings or go on with dsdt what at the end has revealed be necessary. Also unclear is, if eventual wrong settings in bios will conflict with setup tool settings. Well, the unlocked bios has so many settings for PCI-E and graphics that i was pretty sure it works straight away with the right settings.... but till today i had no success. The OS in Dev Manag. knows the card after connect to mPCIE but gives as usual on win 7 code 12 as non selectable cause not enough alloc space. After experimenting with settings in bios without success and the card that was already there i tryed to resolve the initialisation by switching the delay buttons on PCE4 as suggested from a guy in the other forum. Still, no success! WTH.... my tolud is 2.5 or 2.75gb Next step was with setup tool version 1.22 a friend of mine made me the present hoping it will work. No success because he dont accept compaction if dsdt was not overrided before. Now... because the diplayng code 12 is there also without setup tool and because the card is there but cant be initialized, its obvious that the dsdt will resolve the problem... but i still didnt do it. The reasons are 2. 1. The first reason, i wanna find out and be sure 100% if this bios 1.21 and all those settings can resolve initialize it without the dsdt override. To do that i need absolutely your help to understand the functions that i must look for and set the right way. Its unlogic that the guy that made this bios has open all for egpu and it doesnt work. I am convinced there is a way, but a pro must throw an eye on it. 2. The second reason is because i have no clue how to do dsdt and i have to learn it anyway if bios refuses for real and definitively to obey, i see it as more logical first invest time and be sure 100% with bios then do the dsdt override if really needed. Hope you guys help me with that mission, thank you in advance UPDATE 28.08.2016 - 17.05 EU Time SOLVED: After over 2 weeks searching and tryng all day to fix the code 12, i solved just before. I was sure the unlocked bios 1.21 was made to allow easy egpu use. After investigate about the initialisation problems between the ports i discovered that the bios under pci.e settings if spec features set enabled, allows to enable hotplug on pci ports. I just went to the eGpu mPCI port and told him to enable hotplug. Didnt use setup tool, no dsdt override even if seen as necessary till this morning. After reboot eGPU was there, i activated it and it works like a beast to work on cad will be a pleasure now..... C u