BAKED

Looks like others have also bricked their gx60's after flashing. Maybe @svl7 can help you out.

Hmm, did you flash a BIOS for win8 or win7? Yes that's the CMOS battery, nothing will happen if you try to start without the battery. Download your original BIOS from MSI and put it on a fat32 USB stick without renaming it and then try a blind flash.

You'll probably have to enable CSM and change to legacy from UEFI in BIOS, and change back again after flashing.

You could just enter the BIOS after restarting and choose "discard changes and shutdown" and then do the EC reset.

Kepler mobiles have the core locked to 135+, you can't pass this limit with overclocking software. You'll need a modified VBIOS in order to do it.

Yes but that's not a CMOS reset, to reset the EC just remove the power sources (PSU, battery) and hold the power button for a few seconds.

The BIOS extensions doesn't have to be .rom it could be .whatever, usually it's the BIOS version. I just press ctrl + alt + del when everything is done. Why would you need to do a CMOS?

I use a Clevo in my 16F2 and everything works flawless. And it works for others too. Performance wise every 770M should be equal as they are all locked at 135+ core, let's hope that Svl7 will modify a VBIOS so we can utilize the full potential of these cards

You mean VBIOS? Video Bios Collection | techPowerUp

Using Furmark is like bashing your GPU with a hammer, it will only do harm.

As the boot block should be intact a blind flash should work, name your current BIOS file E1756IMS.514 or the name of the original BIOS file and put it on a fat32 formatted USB pen drive, power the notebook on and repeatedly press ctrl + home and wait until it starts to access the USB drive, which can take a while.. And then wait some more. You'll notice if it works or not but be very patient. Yeah they will just swap the motherboard for a new one, if the blind flash won't work you can order a programmed BIOS chip for your model and go to a workshop and they will swap out the chips for a decent price. The chip itself should land on 10-15Euro and the swap should cost around 100Euro whoch will safe you some money. DO THIS AT YOUR OWN RISK! If you feel confident enough and know how to use a soldering iron it's fairly easy to do it yourself, what I think is the safest way to avoid lifting any pads is by cutting of the eeprom's legs at the base of the chip with an exacto knife - remove the old chip and put the soldering iron with tinted tip to the legs remaining on the mobo and remove them one by one. Then you'll have to clean the surface with solder wick and isopropylalcohol - add a small amount of new solder to the pads - put som flux on the surface and the legs of the chip and place the chip perfectly and solder the corners on opposite sides and then solder the rest of the legs. Clean once again with isopropylalcohol and you're done.

Still no, the multiplier and frequency are locked. You can force the turbo to have a longer duration but that's about it. If you want to OC your RAM I think you'll need kingston hyperX in order to do so.

You have ivy bridge which is the third generation intel i processors, i3-3XXX, i5-3XXX, i7-3XXX. Haswell is the fourth generation intel i processors, i3-4XXX, i5-4XXX, i7-4XXX. To be able to determine if you could benefit from a more powerful PSU I'll need to know what your current one outputs and which CPU you have.

Here are the service manuals for Msi gaming series with part numbers and disassembly process. Msi 16F2 http://www.fildirekt.se/dl/1376647437.pdf Msi 16F1 http://www.fildirekt.se/dl/1376641570.rar Msi GE60 http://www.fildirekt.se/dl/1376624183.rar Msi GT60 http://www.fildirekt.se/dl/1376663955.rar Msi 1761 http://www.fildirekt.se/dl/1376711908.rar Msi 16GA http://www.fildirekt.se/dl/1376669066.rar Msi GX70 http://www.fildirekt.se/dl/1376714131.rar Msi GE70 http://www.fildirekt.se/dl/1376701345.rar Msi GT70 http://www.fildirekt.se/dl/1376668746.rar

Liquid nitrogen..

You can't overclock the 3610qm, you might be able to up the BCLK a bit. What RAM do you have?

Here is a modded inf [h=2]http://www.fildirekt.se/dl/1376585539.zip [/h]extract the nvidia installer and put this inf into the display.driver folder.

Why do you need more power, XM CPU?

Why would installing a new OS void your warranty?

If you want UEFI choose UEFI, if not choose LEGACY.

You'll just need to put double layers of 0.5mm thermal pads on the RAMs here: And one layer on the rest, I also use phobya.