andhie133128

May I ask how did you overcome this error? currently facing it and dont know how to fix it.,

Could someone tell me how to fix this?

Hi, do you think it's also support GTX750 Ti?

please note that in windows 8 and windows 10, you have to type "bcedit -set TESTSIGNING ON" after the "asl /loadtable dsdt.aml for it to work...otherwise the large memory will not show.

Hi, there is some cases that you still need to do the DSDT override + PCI compaction using setup 1.30. I fixed it and now my setup is working well.

@Enano @Dschijn thank you guys, currently I'm using msi after burner almost 3 hours playing dota 2...i don't change the settings of the power and temperature just only the core clock and memory clock -502... still using the 60 power adapter....what is your opinion guys?

@Dschijn, basically you only need the power input and supply the enough wattage for the egpu...the gtx 750 Ti itself only consume a 60w power...Even you use a 250W, 300W, 450W or 700W power supply, it's only consume 60W.

Hi @Dschijn, I'm using HP2570p (3rd Gen Intel Core + 8GB RAM) to EXP GDC v8.0 and Zotac GTX 750 Ti 2GB DDDR5. My power supply is either 400W ATX PSU and 60W power adapter since the power consumption of GTX 750 Ti is only 60W but either of this showing same issue so I'm sure it's not the psu problem.

I'm now planning to underclock my Zotac GTX 750 Ti, do you have any recommendation about the underclock settings?

any recommendation? I'm using GTX 750Ti but always crashes for about 5-7 mins playing dota 2. I tried everything by using psu but still showing same issue. After reading this forum page, I have this feeling that is a driver issue. I will now going to downgrade my driver, what version is okay to try for GTX 750Ti?il Update: after downgrading the driver still having the same issue....while playing the screen is freezing then hearing a changing grounded sounds....please advise

Please somebody help me, my eGPU is now working after a long time trying to make dsdt override implementation. But for some reason, my laptop hangs because of it specially playing online game like DOTA2. I tried several option like change the power supply from 60w power adapter to an ATX power supply but still showing the same. Also tried to downgrade the link to Gen1 to gain reliable operation using Setup 1.30 even I'm using 3rd generation processor and EXP GDC v8.0 egpu adapter which can support PCIex16 3.0.... Do you have any idea guys?

I now finally made a dsdt override and used my eGPU. However, I just want to use a dsdt substitution but can't understand the step 4 and step 5, can you teach me? 4.Copy your resultant dsdt.aml to your Setup 1.30 disk image or USB key \config directory. 5.Boot Setup 1.30. Load your modified DSDT table into memory with 'pt MEM writefromfile 1 [address of DSDT table] dsdt.aml'. In my case this command was 'pt MEM writefromfile 1 0xC6FF3198 dsdt.aml'

Can I ask how to do the number 4, where to copy it? And also explain further for the number 5.... thanks in advance

Thank you, now I understand what's the issue. Unfortunately, I bought this laptop and this new graphics card recently without knowing the compatibility. I also purchase the setup 1.30 by @Tech Inferno Fan which I expect it will help but I think the only way is for dsdt override which is very hard.... Now I don't know what to do...

Can anyone could help me to fix the 201 error from my dsdt.dsl file extracted using dsdt editor. Even I clicked fixed in the compile, it will only fix minor errors but I'm stuck on it... I attached the extracted file. extracted dsdt.rar