ule_1

I went out and bought another PSU... System works perfectly. I guess the first one I bought was no good, even though it tested ok! Thanks for your help Dschijn, greatly appreciated!

I tried lowering all settings and the bench may have lasted a couple of seconds longer, but same result. I'll see if I can find someone with a PSU that I can test with and post back my findings.

All the latest drivers, even installed the OS X patch to test in there to ensure it wasn't OS dependent. System crashes after 1 second heaven test in OS X, as it does in windows. Afterburner and GPU-Z doesn't show anything out of the ordinary. I also tried powering the Akitio with the standard power supply that comes with the unit. I have attached a video of the behaviour. The test below crashed to a black screen, however it is sometimes green, purple, etc. https://drive.google.com/file/d/0BxjEaWeXbHZwNTNVNVJLblpaN2M/view?usp=sharing Thanks for your help Dschijn!

Akitio is powered from the psu via 1x molex through to barrel connector. Any ideas Dschijn?

.

Hey guys, I thought I'd give the eGPU a go. Got everything installed and seems to be mostly working in windows 10, however, whenever I start up any 3D application/benchmark, the card/system crashes (with black/blue/green screen and audio looping). I have tried the card in a PC, works ok. Had the PSU (CM 550w) tested - ok. I can get the card to run on 640x480 res, but anything above that = instant crash. Any help is appreciated! Regards, Jay

Hi, Did you manage to get your card working? I'm having similar problems. Jay