warren_briones

I just recently upgraded. The VBIOS that came with the card works but no signal goes to the display. you need to plug in an external monitor on the VGA port. Flash it with svl7's VBIOS mod, and you are good to go. They actually asked me how I got it to work as they said they had a lot of customers who failed to make it work on their systems. I told them about the copper shim issue and suggested to them that the shim should go with the kit. I hope they will include one for you on your purchase.

Yup, i got the Bizlink active adapter to get 120Hz out of the screen. I actually got 3D vision working with the 260m before the upgrade. I'm gonna try to put back the 260m and see if my adapter is the issue, otherwise maybe it could just be a driver problem as the HD audio is detected on the DP.

I now got it to work on my HDMI TV using the DP-to-HDMI adapter. What happened was that it detected it as a VGA display. When it detected it as VGA, there was still no display on the TV. Then i reinstalled the drivers, restarted it and Bam, i suddenly got it to display and system detected it now as HDMI. Problem solved. Now, I tried the same process with the DP-to-DVI adapter to display on my 3D ready LCD Here it still does not work. Yup I am on A09.

yup. tried it from DP-to-HDMI to my LCD TV. It was the same. No signal.

304.79 detected the audio of the DP, but i am still not able to get any signal out of it. I am using a DP-to-DVI converter to my monitor. I do not have this issue with the 260m card. any more tips?

display port isn't working with me. which driver version are you guys using?

I or maybe my daughter accidentally clicked on BD PROCHOT, unticked it and i got it to go up past 1000Mhz. I also noticed, if i enable VSYNC on games, GPU clock gets capped down. I am now playing with the slider finding a sweet overclock spot. I could reach 1300Mhz but if you tinker with a game's graphics options, the driver crashes and MSI AB resets the clocks of the GPU.

I got it to work again this morning.

I am always in High Perf. Adapter is plugged. Weird thing is I reverted it back to the 1st VBIOS in the guide and I am getting 835Mhz (original clock). Flashed it again to the clevo OC version, still i am capped to 700Mhz. Really weird as I did not change anything at all. Could I have bricked my card?

I am facing an issue now with the clevo OC vbios. GPUZ reports 1200Mhz but AfterBurner logs/graphs show 700Mhz (699) only. What could be the issue? It was working fine this morning.

what do you think of these scores: driver crashes if i set it to 1300Mhz any tips? i am really thinking of getting the 940xm...

Finally! gonna try this when i get home... Is this clocked to 1400Mhz by default? or overclockable to 1400Mhz?

I had the same issue. I'm waiting for mr svl7 to mod a vbios for me to be able to overclock the 660m

You are right. Graph spikes are at 835Mhz only I did not notice it until now.

As per GPU-Z i did get an increase from 835 to 970 Mhz. mem clocks are locked though.