tch150

My vbios's size is 88KB, and I've changed an inf file from nvidia's latest driver, then do a manual install from inf file cause I just couldn't run setup.exe. The clock frequency is a bit low, I'll change it later, any advices? Thanks!

I still canno't upload the original picture, so I just keep the image of the chip. Hey, it is pins 1 and 4, chip select and GND. Just shortcut them before turning on. This is my howto as is.. work in progress blind flash.zip tch150 can you PM me an high res picture of the chip? that would be a nice add on for the howto. (mine is SMD package)

Yeah! I've finally got the card K5000m flashed! I've tried many times with nvflash different combination options commands, and then suddenly heard a beep, so I backup the vbios to verify whether it has been changed. And.... YES! Now I get into Windows without problem, have to find the correct driver now! I'll be back for more info later! Thanks you very much io____ !! and all others!

So, I've tried io____ 's tips, it works! I can blind type some commands in dos and backup the vbios, but the flash failed at the end, I got this error: ERROR: Update aborted Exit Code: 2 At the beginning, I heard 3 beeps then 2 beeps, and then almost 2 beeps. What does that mean? what's wrong with the command: nvflash -L log.txt -4 -5 -6 k5000m.rom or nvflash -i0 -4 -5 -6 k5000m.rom Should I type y or Y or yes or YES? (nvflash v5.163 dos) Thanks for helps! nvflash --list nvflash --check nvflash -L log.txt -4 -6 k5000m.rom

Hi again! Sorry for my late reply, I still haven't have time to test and take another picture yet. I'll do it as soon as possible in my leisure time. By now, my profile doesn't allow me to download the attached file. Thanks again for the tips!

Thanks! I surely will pm you if i succeed in making it boot to dos.

Hi! Here is the picture taken from my k5000m. Obviously, the vbios eeprom is the same as your: MX25L2006E Should I shortcut pin1(CS) with pin4(GND) or pin1(CS) with pin8(VCC) to bypass the POST gpu check? And by the way, I still don't know which version of vbios works with my Clevo P150hm... It would be great if you write a tutorial for us, much appreciated! P.S.: Sorry for the pixel quality, I'm allowed to upload only pictures < 1MB!

Hi, I have bought the nvidia k5000m for my clevo p150hm with exactly the same problem, 1 beep every 30s, after 3 beeps I got a black screen but laptop still power on. I've removed all HDD, DVD, but cannot boot to dos. Are there any schemas to short the k5000m vbios as well? Thanks!